main
Ray
Publish 0.1.0
cf16e62
MLX91208LDC-CAV-000-SP
Melexis · Current Sensors · SOIC-8
MLX91208LDC-CAV-000-SP from Melexis, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDEC | power_in | Digital supply voltage pin for the internal digital circuitry; the datasheet gives no further voltage limit for this pin, and the application diagram calls for decoupling capacitors (C2 2-10 nF, C3 47 nF) on the supply network. |
| 2 | NC | unconnected | Not connected / unused; the datasheet recommends connecting unused pins to ground for optimal EMC performance. |
| 3 | GND | power_in | Ground supply voltage pin for the sensor; the datasheet gives no separate voltage limit for this pin. |
| 4 | TEST/MUST | input | Digital pin used for test and factory calibration; the datasheet gives no further connection limits or function details for this pin. |
| 5 | VDD | power_in | Supply voltage pin; nominal supply is 4.5 V to 5.5 V (typical 5 V) with an absolute maximum positive supply of +10 V, as stated in sections 6 and 8 (pages 5-6). |
| 6 | OUT | output | Analog current sensor output with linear range 10%-90% of VDD, driving a DC load of 6 kΩ to 100 kΩ, maximum output current ±2 mA, and capacitive load 1 nF to 10 nF (sections 6 and 8, pages 5-6). |
| 7 | NC | unconnected | Not connected / unused; the datasheet recommends connecting unused pins to ground for optimal EMC performance. |
| 8 | NC | unconnected | Not connected / unused; the datasheet recommends connecting unused pins to ground for optimal EMC performance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Melexis |
| Package | SOIC-8 |
| Category | Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating ambient temperature range | TA | -40 | 150 | °C | 5 | ||
| Storage temperature range | TS | -55 | 165 | °C | 5 | ||
| Maximum junction temperature | Tj,max | -55 | 155 | °C | 5 | ||
| Positive supply voltage (overvoltage) | Vdd | 10 | V | 5 | |||
| Reverse supply voltage protection | -0.3 | V | 5 | ||||
| Positive output voltage | 10 | V | 5 | ||||
| Output current | Iout | -70 | 70 | mA | 5 | ||
| Reverse output voltage | -0.3 | V | 5 | ||||
| Reverse output current | -50 | mA | 5 | ||||
| Magnetic flux density | -3 | 3 | T | 5 | |||
| ESD HBM | 2 | kV | HBM | 5 | |||
| Package thermal resistance junction-to-ambient | θja | 174 | °C/W | JEDEC 1s0p board | 5 | ||
| Nominal supply voltage | Vdd | 4.5 | 5 | 5.5 | V | 6 | |
| Supply current | Idd | 9 | 12 | 14 | mA | W/o output load in application mode; TA = -40 to 150°C | 6 |
| DC load current | Iout | -2 | 2 | mA | Rout in range [6kΩ, 100kΩ] | 6 | |
| Maximum output current (driving capability) | Imax | -2 | 2 | mA | Inside this range, output voltage reaches 3%VDD and 97%VDD | 6 | |
| Output resistance | 1 | 5 | Ω | Vout = 50% Vdd, RL = 6kΩ | 6 | ||
| Output capacitive load | Cload | 1 | 10 | nF | Output amplifier is optimized for the capacitive load range | 6 | |
| Leakage current | Ileak | 20 | uA | High impedance mode; T=150°C | 6 | ||
| Linear output voltage range | Vout_pd | 10 | 90 | %Vdd | Vout in [10%Vdd, 90%Vdd]; pull down ≥ 10 kΩ | 6 | |
| High-impedance mode level | Vout_HiZ_pd | 5 | %Vdd | pull-down RL ≤ 25 kΩ, T≤125°C | 6 | ||
| Under-voltage detection | Vdd_uvd | 3 | 3.3 | 4 | V | Low to high voltage | 6 |
| Under-voltage hysteresis | Vdd_uvh | 0.2 | 0.3 | 0.45 | V | Hysteresis | 6 |
| Over-voltage detection | Vdd_ovd | 6.5 | 7.6 | V | Low to high voltage | 7 | |
| Over-voltage hysteresis | Vdd_ovh | 0.05 | 0.7 | V | Hysteresis | 7 | |
| Ratiometry enable detection | Vratio_d | 4 | 4.5 | V | Low to high voltage | 7 | |
| Ratiometry enable hysteresis | Vratio_h | 0.01 | 0.5 | V | Hysteresis | 7 | |
| Nominal field range | Bnom | -50 | 50 | mT | 8 | ||
| Operational field range | Bop | -60 | 60 | mT | 8 | ||
| Linearity error | NL | -0.7 | 0.7 | %FS | B in range Bop; Vout in [10%VDD, 90%VDD] | 8 | |
| Hysteresis, remanent field | Br | -60 | 60 | uT | B = Bop | 8 | |
| Programmable sensitivity (CAV-000) | S | 30 | 40 | 200 | mV/mT | CAV-000 (xxV version) | 8 |
| Sensitivity programming resolution | Sres | 0.1 | % | 8 | |||
| Refresh rate | Trr | 0.8 | 1 | 2 | us | 8 | |
| Step response time, noise filter OFF | Tresp | 2 | 3 | us | Delay 90% input to 90% output; 2V step at output; input rise time = 1µs; noise filter OFF | 8 | |
| Step response time, noise filter ON | Tresp | 5 | 6 | us | Delay 90% input to 90% output; 2V step at output; input rise time = 1µs; noise filter ON | 8 | |
| Bandwidth, noise filter OFF | BW | 200 | 250 | 300 | kHz | Noise filter OFF | 8 |
| Bandwidth, noise filter ON | BW | 120 | 150 | 180 | kHz | Noise filter ON | 8 |
| Power-on delay | TPOD | 1 | ms | Vout = 100% of FS; pull-down resistor ≤100kOhm | 9 | ||
| Ratiometry cut-off frequency | Fratio | 250 | Hz | 9 | |||
| Thermal offset drift | ΔVoq | -10 | 10 | mV | Offset drift referred to 25°C; S=40mV/mT (xxV version); Vdd=5V, TC=0±150 ppm/°C; Voq=50±0.2 %Vdd | 9 | |
| Thermal sensitivity drift | TC | -1.5 | 0 | 1.5 | % of S | 9 | |
| Ratiometry error offset | ΔVoq | -0.4 | 0.4 | % of Voq | Voq = 50%Vdd; ΔVdd = 10%Vdd | 9 | |
| Ratiometry error sensitivity | ΔS | -0.4 | 0.4 | % of S | ΔVdd = 10%Vdd | 9 | |
| Pull-down resistor for diagnostic low (recommended) | R1 | 6 | 100 | kΩ | Pull down resistor | 13 | |
| Decoupling capacitor (recommended) | C2 | 2 | 10 | nF | Decoupling, EMI, ESD | 13 |
CAD (KiCad official)
- Symbol:
MLX91208LDC-CAV-000-SP - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
mlx91208ldc-cav-000-sp-etched.step/mlx91208ldc-cav-000-sp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mlx91208ldc-cav-000-sp.step/mlx91208ldc-cav-000-sp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Melexis datasheet (18 pp, sha256
adff91415b95cb6a, retrieved 2026-10-30, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MLX91208LDC-CAV-000-SP
**Melexis** · Current Sensors · SOIC-8
MLX91208LDC-CAV-000-SP from Melexis, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDEC | power_in | Digital supply voltage pin for the internal digital circuitry; the datasheet gives no further voltage limit for this pin, and the application diagram calls for decoupling capacitors (C2 2-10 nF, C3 47 nF) on the supply network. |
| 2 | NC | unconnected | Not connected / unused; the datasheet recommends connecting unused pins to ground for optimal EMC performance. |
| 3 | GND | power_in | Ground supply voltage pin for the sensor; the datasheet gives no separate voltage limit for this pin. |
| 4 | TEST/MUST | input | Digital pin used for test and factory calibration; the datasheet gives no further connection limits or function details for this pin. |
| 5 | VDD | power_in | Supply voltage pin; nominal supply is 4.5 V to 5.5 V (typical 5 V) with an absolute maximum positive supply of +10 V, as stated in sections 6 and 8 (pages 5-6). |
| 6 | OUT | output | Analog current sensor output with linear range 10%-90% of VDD, driving a DC load of 6 kΩ to 100 kΩ, maximum output current ±2 mA, and capacitive load 1 nF to 10 nF (sections 6 and 8, pages 5-6). |
| 7 | NC | unconnected | Not connected / unused; the datasheet recommends connecting unused pins to ground for optimal EMC performance. |
| 8 | NC | unconnected | Not connected / unused; the datasheet recommends connecting unused pins to ground for optimal EMC performance. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Melexis |
| Package | SOIC-8 |
| Category | Sensors |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating ambient temperature range | TA | -40 | | 150 | °C | | 5 |
| Storage temperature range | TS | -55 | | 165 | °C | | 5 |
| Maximum junction temperature | Tj,max | -55 | | 155 | °C | | 5 |
| Positive supply voltage (overvoltage) | Vdd | | | 10 | V | | 5 |
| Reverse supply voltage protection | | -0.3 | | | V | | 5 |
| Positive output voltage | | | | 10 | V | | 5 |
| Output current | Iout | -70 | | 70 | mA | | 5 |
| Reverse output voltage | | -0.3 | | | V | | 5 |
| Reverse output current | | -50 | | | mA | | 5 |
| Magnetic flux density | | -3 | | 3 | T | | 5 |
| ESD HBM | | | | 2 | kV | HBM | 5 |
| Package thermal resistance junction-to-ambient | θja | | 174 | | °C/W | JEDEC 1s0p board | 5 |
| Nominal supply voltage | Vdd | 4.5 | 5 | 5.5 | V | | 6 |
| Supply current | Idd | 9 | 12 | 14 | mA | W/o output load in application mode; TA = -40 to 150°C | 6 |
| DC load current | Iout | -2 | | 2 | mA | Rout in range [6kΩ, 100kΩ] | 6 |
| Maximum output current (driving capability) | Imax | -2 | | 2 | mA | Inside this range, output voltage reaches 3%VDD and 97%VDD | 6 |
| Output resistance | | 1 | | 5 | Ω | Vout = 50% Vdd, RL = 6kΩ | 6 |
| Output capacitive load | Cload | 1 | | 10 | nF | Output amplifier is optimized for the capacitive load range | 6 |
| Leakage current | Ileak | | | 20 | uA | High impedance mode; T=150°C | 6 |
| Linear output voltage range | Vout_pd | 10 | | 90 | %Vdd | Vout in [10%Vdd, 90%Vdd]; pull down ≥ 10 kΩ | 6 |
| High-impedance mode level | Vout_HiZ_pd | | | 5 | %Vdd | pull-down RL ≤ 25 kΩ, T≤125°C | 6 |
| Under-voltage detection | Vdd_uvd | 3 | 3.3 | 4 | V | Low to high voltage | 6 |
| Under-voltage hysteresis | Vdd_uvh | 0.2 | 0.3 | 0.45 | V | Hysteresis | 6 |
| Over-voltage detection | Vdd_ovd | 6.5 | | 7.6 | V | Low to high voltage | 7 |
| Over-voltage hysteresis | Vdd_ovh | 0.05 | | 0.7 | V | Hysteresis | 7 |
| Ratiometry enable detection | Vratio_d | 4 | | 4.5 | V | Low to high voltage | 7 |
| Ratiometry enable hysteresis | Vratio_h | 0.01 | | 0.5 | V | Hysteresis | 7 |
| Nominal field range | Bnom | -50 | | 50 | mT | | 8 |
| Operational field range | Bop | -60 | | 60 | mT | | 8 |
| Linearity error | NL | -0.7 | | 0.7 | %FS | B in range Bop; Vout in [10%VDD, 90%VDD] | 8 |
| Hysteresis, remanent field | Br | -60 | | 60 | uT | B = Bop | 8 |
| Programmable sensitivity (CAV-000) | S | 30 | 40 | 200 | mV/mT | CAV-000 (xxV version) | 8 |
| Sensitivity programming resolution | Sres | | 0.1 | | % | | 8 |
| Refresh rate | Trr | 0.8 | 1 | 2 | us | | 8 |
| Step response time, noise filter OFF | Tresp | 2 | 3 | | us | Delay 90% input to 90% output; 2V step at output; input rise time = 1µs; noise filter OFF | 8 |
| Step response time, noise filter ON | Tresp | 5 | 6 | | us | Delay 90% input to 90% output; 2V step at output; input rise time = 1µs; noise filter ON | 8 |
| Bandwidth, noise filter OFF | BW | 200 | 250 | 300 | kHz | Noise filter OFF | 8 |
| Bandwidth, noise filter ON | BW | 120 | 150 | 180 | kHz | Noise filter ON | 8 |
| Power-on delay | TPOD | | | 1 | ms | Vout = 100% of FS; pull-down resistor ≤100kOhm | 9 |
| Ratiometry cut-off frequency | Fratio | | 250 | | Hz | | 9 |
| Thermal offset drift | ΔVoq | -10 | | 10 | mV | Offset drift referred to 25°C; S=40mV/mT (xxV version); Vdd=5V, TC=0±150 ppm/°C; Voq=50±0.2 %Vdd | 9 |
| Thermal sensitivity drift | TC | -1.5 | 0 | 1.5 | % of S | | 9 |
| Ratiometry error offset | ΔVoq | -0.4 | | 0.4 | % of Voq | Voq = 50%Vdd; ΔVdd = 10%Vdd | 9 |
| Ratiometry error sensitivity | ΔS | -0.4 | | 0.4 | % of S | ΔVdd = 10%Vdd | 9 |
| Pull-down resistor for diagnostic low (recommended) | R1 | 6 | | 100 | kΩ | Pull down resistor | 13 |
| Decoupling capacitor (recommended) | C2 | 2 | | 10 | nF | Decoupling, EMI, ESD | 13 |
## CAD (KiCad official)
- Symbol: `MLX91208LDC-CAV-000-SP`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `mlx91208ldc-cav-000-sp-etched.step` / `mlx91208ldc-cav-000-sp-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mlx91208ldc-cav-000-sp.step` / `mlx91208ldc-cav-000-sp.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Melexis datasheet](docs/mlx91208ldc-cav-000-sp-datasheet.pdf) (18 pp, sha256 `adff91415b95cb6a`, retrieved 2026-10-30, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mlx91208ldc-cav-000-sp-datasheet.pdf)