main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mlx91208ldc-cav-000-sp: viewers · Ray
mlx91208ldc-cav-000-sp-etched.glb Publish 0.1.0 · Ray
mlx91208ldc-cav-000-sp-etched.step mlx91208ldc-cav-000-sp: factory component page (tier=lcsc) · Ray
mlx91208ldc-cav-000-sp-hero.glb mlx91208ldc-cav-000-sp: hero GLB from the etched model (keeps the MPN mark) · Ray
mlx91208ldc-cav-000-sp-hero.overlay.json Publish 0.1.0 · Ray
mlx91208ldc-cav-000-sp.glb Publish 0.1.0 · Ray
mlx91208ldc-cav-000-sp.kicad_mod Publish 0.1.0 · Ray
mlx91208ldc-cav-000-sp.kicad_sym Publish 0.1.0 · Ray
mlx91208ldc-cav-000-sp.lbr Publish 0.1.0 · Ray
mlx91208ldc-cav-000-sp.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 8 pins · Ray

MLX91208LDC-CAV-000-SP

Melexis · Current Sensors · SOIC-8

MLX91208LDC-CAV-000-SP from Melexis, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDEC power_in Digital supply voltage pin for the internal digital circuitry; the datasheet gives no further voltage limit for this pin, and the application diagram calls for decoupling capacitors (C2 2-10 nF, C3 47 nF) on the supply network.
2 NC unconnected Not connected / unused; the datasheet recommends connecting unused pins to ground for optimal EMC performance.
3 GND power_in Ground supply voltage pin for the sensor; the datasheet gives no separate voltage limit for this pin.
4 TEST/MUST input Digital pin used for test and factory calibration; the datasheet gives no further connection limits or function details for this pin.
5 VDD power_in Supply voltage pin; nominal supply is 4.5 V to 5.5 V (typical 5 V) with an absolute maximum positive supply of +10 V, as stated in sections 6 and 8 (pages 5-6).
6 OUT output Analog current sensor output with linear range 10%-90% of VDD, driving a DC load of 6 kΩ to 100 kΩ, maximum output current ±2 mA, and capacitive load 1 nF to 10 nF (sections 6 and 8, pages 5-6).
7 NC unconnected Not connected / unused; the datasheet recommends connecting unused pins to ground for optimal EMC performance.
8 NC unconnected Not connected / unused; the datasheet recommends connecting unused pins to ground for optimal EMC performance.

Key specifications

Parameter Value
Manufacturer Melexis
Package SOIC-8
Category Sensors
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating ambient temperature range TA -40 150 °C 5
Storage temperature range TS -55 165 °C 5
Maximum junction temperature Tj,max -55 155 °C 5
Positive supply voltage (overvoltage) Vdd 10 V 5
Reverse supply voltage protection -0.3 V 5
Positive output voltage 10 V 5
Output current Iout -70 70 mA 5
Reverse output voltage -0.3 V 5
Reverse output current -50 mA 5
Magnetic flux density -3 3 T 5
ESD HBM 2 kV HBM 5
Package thermal resistance junction-to-ambient θja 174 °C/W JEDEC 1s0p board 5
Nominal supply voltage Vdd 4.5 5 5.5 V 6
Supply current Idd 9 12 14 mA W/o output load in application mode; TA = -40 to 150°C 6
DC load current Iout -2 2 mA Rout in range [6kΩ, 100kΩ] 6
Maximum output current (driving capability) Imax -2 2 mA Inside this range, output voltage reaches 3%VDD and 97%VDD 6
Output resistance 1 5 Ω Vout = 50% Vdd, RL = 6kΩ 6
Output capacitive load Cload 1 10 nF Output amplifier is optimized for the capacitive load range 6
Leakage current Ileak 20 uA High impedance mode; T=150°C 6
Linear output voltage range Vout_pd 10 90 %Vdd Vout in [10%Vdd, 90%Vdd]; pull down ≥ 10 kΩ 6
High-impedance mode level Vout_HiZ_pd 5 %Vdd pull-down RL ≤ 25 kΩ, T≤125°C 6
Under-voltage detection Vdd_uvd 3 3.3 4 V Low to high voltage 6
Under-voltage hysteresis Vdd_uvh 0.2 0.3 0.45 V Hysteresis 6
Over-voltage detection Vdd_ovd 6.5 7.6 V Low to high voltage 7
Over-voltage hysteresis Vdd_ovh 0.05 0.7 V Hysteresis 7
Ratiometry enable detection Vratio_d 4 4.5 V Low to high voltage 7
Ratiometry enable hysteresis Vratio_h 0.01 0.5 V Hysteresis 7
Nominal field range Bnom -50 50 mT 8
Operational field range Bop -60 60 mT 8
Linearity error NL -0.7 0.7 %FS B in range Bop; Vout in [10%VDD, 90%VDD] 8
Hysteresis, remanent field Br -60 60 uT B = Bop 8
Programmable sensitivity (CAV-000) S 30 40 200 mV/mT CAV-000 (xxV version) 8
Sensitivity programming resolution Sres 0.1 % 8
Refresh rate Trr 0.8 1 2 us 8
Step response time, noise filter OFF Tresp 2 3 us Delay 90% input to 90% output; 2V step at output; input rise time = 1µs; noise filter OFF 8
Step response time, noise filter ON Tresp 5 6 us Delay 90% input to 90% output; 2V step at output; input rise time = 1µs; noise filter ON 8
Bandwidth, noise filter OFF BW 200 250 300 kHz Noise filter OFF 8
Bandwidth, noise filter ON BW 120 150 180 kHz Noise filter ON 8
Power-on delay TPOD 1 ms Vout = 100% of FS; pull-down resistor ≤100kOhm 9
Ratiometry cut-off frequency Fratio 250 Hz 9
Thermal offset drift ΔVoq -10 10 mV Offset drift referred to 25°C; S=40mV/mT (xxV version); Vdd=5V, TC=0±150 ppm/°C; Voq=50±0.2 %Vdd 9
Thermal sensitivity drift TC -1.5 0 1.5 % of S 9
Ratiometry error offset ΔVoq -0.4 0.4 % of Voq Voq = 50%Vdd; ΔVdd = 10%Vdd 9
Ratiometry error sensitivity ΔS -0.4 0.4 % of S ΔVdd = 10%Vdd 9
Pull-down resistor for diagnostic low (recommended) R1 6 100 kΩ Pull down resistor 13
Decoupling capacitor (recommended) C2 2 10 nF Decoupling, EMI, ESD 13

CAD (KiCad official)

  • Symbol: MLX91208LDC-CAV-000-SP
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: mlx91208ldc-cav-000-sp-etched.step / mlx91208ldc-cav-000-sp-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mlx91208ldc-cav-000-sp.step / mlx91208ldc-cav-000-sp.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Melexis datasheet (18 pp, sha256 adff91415b95cb6a, retrieved 2026-10-30, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF