Generated by kicad-footprint-generator · KiCad file format 20260206
MLX90395KLW-BBA-001-SP
Melexis · Hall Sensor · QFN-16(3x3)
MLX90395KLW-BBA-001-SP from Melexis, in a QFN-16(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | INT | output | Interrupt output for the QFN-16 package; the datasheet gives no separate limits, only the absolute maximum output rating of 4 V (<48h) with Vout < VDD+0.3V. |
| 2 | MS/CS | input | Mode Select (I2C) / Chip Select (SPI) input; absolute maximum input voltage is 4 V (<48h) with Vin < VDD+0.3V. |
| 3 | SCL/SCLK | input | Bus clock input: SCL for I2C or SCLK for SPI (SPI up to 10 MHz, or 1 MHz with the 1 MHz SPI filter option of this BBA-001 variant). |
| 4 | Not Used | unconnected | Not connected in the QFN-16 package; the datasheet recommends connecting unused pins to ground for optimal EMC behaviour. |
| 5 | SDA/MOSI | bidirectional | I2C data (SDA) or SPI Master Out Slave In (MOSI); as a shared I/O pin the maximum rating for the output applies (4 V, <48h). |
| 6 | MISO | output | SPI Master In Slave Out output pin; absolute maximum output voltage is 4 V (<48h) with Vout < VDD+0.3V. |
| 7 | INT/TRG | bidirectional | Programmable Interrupt / Trigger pin, configurable as output (interrupt) or input (external trigger). |
| 8 | Not Used | unconnected | Not connected in the QFN-16 package; the datasheet recommends connecting unused pins to ground for optimal EMC behaviour. |
| 9 | Not Used | unconnected | Not connected in the QFN-16 package; the datasheet recommends connecting unused pins to ground for optimal EMC behaviour. |
| 10 | Not Used | unconnected | Not connected in the QFN-16 package; the datasheet recommends connecting unused pins to ground for optimal EMC behaviour. |
| 11 | A1 | input | I2C Address Pin 1 input, used to set the I2C device address. |
| 12 | A0 | input | I2C Address Pin 0 input, used to set the I2C device address. |
| 13 | VSS | power_in | Ground supply pin for the device. |
| 14 | Not Used | unconnected | Not connected in the QFN-16 package; the datasheet recommends connecting unused pins to ground for optimal EMC behaviour. |
| 15 | VDD | power_in | Supply pin; the absolute maximum supply voltage VDDMAX is 4 V (<48h) and reverse supply protection is -0.3 V (<48h). |
| 16 | Not Used | unconnected | Not connected in the QFN-16 package; the datasheet recommends connecting unused pins to ground for optimal EMC behaviour. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Melexis |
| Package | QFN-16(3x3) |
| Category | Sensors |
| Pins | 17 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDDMAX | 4 | V | <48h | 10 | ||
| Reverse Voltage Protection | VDDREV | -0.3 | V | <48h | 10 | ||
| Positive Output Voltage | Vout | 4 | V | <48h; Vout<VDD+0.3V | 10 | ||
| Positive Input Voltage | Vin | 4 | V | <48h; Vin<VDD+0.3V | 10 | ||
| Operating Temperature | TAMB | -40 | 125 | °C | Refer to the qualification profile | 10 | |
| Junction Temperature | TJ | 150 | °C | 10 | |||
| Storage Temperature | TST | -40 | 150 | °C | Refer to the qualification profile | 10 | |
| Magnetic Flux Density | BMAX | -1 | 1 | T | 10 | ||
| ESD voltage, HBM | ESDHBM | -2 | 2 | kV | According AEC-Q100-002; DC and LW package code | 10 | |
| ESD voltage, CDM | ESDCDM | -750 | 750 | V | According AEC-Q100-011; DC and LW package code | 10 | |
| Analog Supply Voltage | VDD | 2.6 | 3.3 | 3.6 | V | TA ≤ 90°C | 12 |
| Analog Supply Voltage | VDD | 3 | 3.3 | 3.6 | V | TA > 90°C | 12 |
| Supply Current | Idd.convXY | 2.3 | 3 | mA | X-/Y-axis measurement | 12 | |
| Supply Current | Idd.convZ | 3 | 4 | mA | Z-axis measurement | 12 | |
| Supply Current | Idd.convT | 1.6 | 2 | mA | Temperature measurement | 12 | |
| Idle Current | Idd.idle | 1.4 | 9 | µA | TA ≤ 85°C | 12 | |
| Idle Current | Idd.idle | 1.4 | 20 | µA | TA within TAMB | 12 | |
| Standby Current | Idd.stby | 2.4 | 10 | µA | TA ≤ 85°C | 12 | |
| Standby Current | Idd.stby | 2.4 | 21 | µA | TA within TAMB | 12 | |
| Surge Current | Isurge | 25 | 250 | mA | Startup current, <3µs | 12 | |
| Power-On reset (rising) | VporLH | 1.45 | 1.52 | V | 12 | ||
| Power-On reset (falling) | VporLH | 1.3 | 1.39 | V | 12 | ||
| Input High Threshold | VIH | 75 | %VDD | SDA/MOSI, SCL/SCLK | 12 | ||
| Input Low Threshold | VIL | 25 | %VDD | SDA/MOSI, SCL/SCLK | 12 | ||
| Input High Threshold | VIH | 70 | %VDD | INT/TRG, MS/CS | 12 | ||
| Input Low Threshold | VIL | 20 | %VDD | INT/TRG, MS/CS | 12 | ||
| Output Level High | VOH | 98 | %VDD | Static, 1mA load; MISO, INT, INT/TRIG, SDA | 12 | ||
| Output Level Low | VOL | 2 | %VDD | Static, 1mA load; MISO, INT, INT/TRIG, SDA | 12 | ||
| ON Resistance | Rds.on | 4 | 6 | 9 | Ω | SDA | 12 |
| ON Resistance | Rds.on | 13 | 20 | 27 | Ω | INT (NMOS and PMOS) | 12 |
| Output High Short Circuit Current | IshortH | -60 | mA | Vout forced to 0V | 12 | ||
| Output Low Short Circuit Current | IshortL | 110 | mA | Vout forced to VDD | 12 | ||
| Main Oscillator Frequency | FOSC | 0.95 | 1 | 1.05 | MHz | TA = 35°C | 14 |
| Main Oscillator Thermal Drift | FOSC_TH | -5 | 5 | %FOSC | TA within TAMB | 14 | |
| Low Power Oscillator Frequency | FLPOSC | 48 | 50 | 52 | kHz | TA = 35°C | 14 |
| LP Oscillator Thermal Drift | FLPOSC_TH | -6 | 6 | %FLPOSC | TA within TAMB | 14 | |
| Reset Time (POR and RT command) | TPOR | 1.3 | 2.4 | ms | Time from STARTUP to IDLE | 14 | |
| Voltage Conversion Time | TCONVV | 163 | 259 | µs | VDD measurement, FOSC = 1MHz | 14 | |
| Temperature Conversion Time | TCONVT | 163 | 835 | µs | Programmable Signal Integration, FOSC = 1MHz | 14 | |
| Magnetic Conversion Time | TCONVM | 163 | 33347 | µs | Programmable Signal Integration, FOSC = 1MHz, single channel | 14 | |
| Interval Time | TINT | 0 | 1260 | ms | Time in between conversion cycles (FLPOSC = 50kHz) | 14 | |
| Trigger Pulse Width | TTRIG | 0.01 | 250 | µs | Active High | 14 | |
| Temperature Sensor Linearity | TLIN | -2 | 2 | °C | 15 | ||
| Temperature Sensor Accuracy | TACC | 0 | 10 | °C | TA ≤ 35°C | 15 | |
| Temperature Sensor Accuracy | TACC | -1 | 7 | °C | TA > 35°C | 15 | |
| Voltage Linearity | VLIN | -20 | 20 | mV | 15 | ||
| Voltage Accuracy | VACC | -200 | 200 | mV | 15 | ||
| Offset | X0, Y0, Z0 | -150 | 150 | LSB16 | TA within TAMB | 17 | |
| Sensitivity Accuracy X- or Y-axis | -8 | 8 | % | TA = 35°C | 17 | ||
| Sensitivity Accuracy Z-axis | -10 | 10 | % | TA = 35°C | 17 | ||
| Sensitivity Temperature Coefficient X- or Y-axis | TCSXY | -500 | 500 | ppm/°C | TA within TAMB | 17 | |
| Sensitivity Temperature Coefficient Z-axis | TCSZ | -600 | 600 | ppm/°C | TA within TAMB | 17 | |
| Mismatch on the Raw Signals X, Y and Z | SMISMXY | -2 | 2 | % | TA = 35°C | 17 | |
| Sensitivity X- or Y-axis | SXX50 | 2.5 | µT/LSB16 | Sensing range 50 mT | 17 | ||
| Sensitivity Z-axis | SZZ50 | 2.5 | µT/LSB16 | Sensing range 50 mT | 17 | ||
| Junction to Case | θjc | 21 | K/W | 56 | |||
| Junction to Ambient | θja | 185 | K/W | JEDEC 1s2p board | 56 | ||
| Junction to Ambient | θja | 213 | K/W | JEDEC 1s0p board | 56 |
CAD (KiCad official)
- Symbol:
MLX90395KLW-BBA-001-SP - Footprint:
Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: QFN-16(3x3) (KiCad packages3D, STEP)
- 3D model files:
mlx90395klw-bba-001-sp-etched.step/mlx90395klw-bba-001-sp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mlx90395klw-bba-001-sp.step/mlx90395klw-bba-001-sp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Melexis datasheet (57 pp, sha256
9fc54f6d8bd358f0, retrieved 2026-10-28, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).