Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MLX90395KLW-BBA-001-SP

Melexis · Hall Sensor · QFN-16(3x3)

MLX90395KLW-BBA-001-SP from Melexis, in a QFN-16(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 INT output Interrupt output for the QFN-16 package; the datasheet gives no separate limits, only the absolute maximum output rating of 4 V (<48h) with Vout < VDD+0.3V.
2 MS/CS input Mode Select (I2C) / Chip Select (SPI) input; absolute maximum input voltage is 4 V (<48h) with Vin < VDD+0.3V.
3 SCL/SCLK input Bus clock input: SCL for I2C or SCLK for SPI (SPI up to 10 MHz, or 1 MHz with the 1 MHz SPI filter option of this BBA-001 variant).
4 Not Used unconnected Not connected in the QFN-16 package; the datasheet recommends connecting unused pins to ground for optimal EMC behaviour.
5 SDA/MOSI bidirectional I2C data (SDA) or SPI Master Out Slave In (MOSI); as a shared I/O pin the maximum rating for the output applies (4 V, <48h).
6 MISO output SPI Master In Slave Out output pin; absolute maximum output voltage is 4 V (<48h) with Vout < VDD+0.3V.
7 INT/TRG bidirectional Programmable Interrupt / Trigger pin, configurable as output (interrupt) or input (external trigger).
8 Not Used unconnected Not connected in the QFN-16 package; the datasheet recommends connecting unused pins to ground for optimal EMC behaviour.
9 Not Used unconnected Not connected in the QFN-16 package; the datasheet recommends connecting unused pins to ground for optimal EMC behaviour.
10 Not Used unconnected Not connected in the QFN-16 package; the datasheet recommends connecting unused pins to ground for optimal EMC behaviour.
11 A1 input I2C Address Pin 1 input, used to set the I2C device address.
12 A0 input I2C Address Pin 0 input, used to set the I2C device address.
13 VSS power_in Ground supply pin for the device.
14 Not Used unconnected Not connected in the QFN-16 package; the datasheet recommends connecting unused pins to ground for optimal EMC behaviour.
15 VDD power_in Supply pin; the absolute maximum supply voltage VDDMAX is 4 V (<48h) and reverse supply protection is -0.3 V (<48h).
16 Not Used unconnected Not connected in the QFN-16 package; the datasheet recommends connecting unused pins to ground for optimal EMC behaviour.
17 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Melexis
Package QFN-16(3x3)
Category Sensors
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VDDMAX 4 V <48h 10
Reverse Voltage Protection VDDREV -0.3 V <48h 10
Positive Output Voltage Vout 4 V <48h; Vout<VDD+0.3V 10
Positive Input Voltage Vin 4 V <48h; Vin<VDD+0.3V 10
Operating Temperature TAMB -40 125 °C Refer to the qualification profile 10
Junction Temperature TJ 150 °C 10
Storage Temperature TST -40 150 °C Refer to the qualification profile 10
Magnetic Flux Density BMAX -1 1 T 10
ESD voltage, HBM ESDHBM -2 2 kV According AEC-Q100-002; DC and LW package code 10
ESD voltage, CDM ESDCDM -750 750 V According AEC-Q100-011; DC and LW package code 10
Analog Supply Voltage VDD 2.6 3.3 3.6 V TA ≤ 90°C 12
Analog Supply Voltage VDD 3 3.3 3.6 V TA > 90°C 12
Supply Current Idd.convXY 2.3 3 mA X-/Y-axis measurement 12
Supply Current Idd.convZ 3 4 mA Z-axis measurement 12
Supply Current Idd.convT 1.6 2 mA Temperature measurement 12
Idle Current Idd.idle 1.4 9 µA TA ≤ 85°C 12
Idle Current Idd.idle 1.4 20 µA TA within TAMB 12
Standby Current Idd.stby 2.4 10 µA TA ≤ 85°C 12
Standby Current Idd.stby 2.4 21 µA TA within TAMB 12
Surge Current Isurge 25 250 mA Startup current, <3µs 12
Power-On reset (rising) VporLH 1.45 1.52 V 12
Power-On reset (falling) VporLH 1.3 1.39 V 12
Input High Threshold VIH 75 %VDD SDA/MOSI, SCL/SCLK 12
Input Low Threshold VIL 25 %VDD SDA/MOSI, SCL/SCLK 12
Input High Threshold VIH 70 %VDD INT/TRG, MS/CS 12
Input Low Threshold VIL 20 %VDD INT/TRG, MS/CS 12
Output Level High VOH 98 %VDD Static, 1mA load; MISO, INT, INT/TRIG, SDA 12
Output Level Low VOL 2 %VDD Static, 1mA load; MISO, INT, INT/TRIG, SDA 12
ON Resistance Rds.on 4 6 9 Ω SDA 12
ON Resistance Rds.on 13 20 27 Ω INT (NMOS and PMOS) 12
Output High Short Circuit Current IshortH -60 mA Vout forced to 0V 12
Output Low Short Circuit Current IshortL 110 mA Vout forced to VDD 12
Main Oscillator Frequency FOSC 0.95 1 1.05 MHz TA = 35°C 14
Main Oscillator Thermal Drift FOSC_TH -5 5 %FOSC TA within TAMB 14
Low Power Oscillator Frequency FLPOSC 48 50 52 kHz TA = 35°C 14
LP Oscillator Thermal Drift FLPOSC_TH -6 6 %FLPOSC TA within TAMB 14
Reset Time (POR and RT command) TPOR 1.3 2.4 ms Time from STARTUP to IDLE 14
Voltage Conversion Time TCONVV 163 259 µs VDD measurement, FOSC = 1MHz 14
Temperature Conversion Time TCONVT 163 835 µs Programmable Signal Integration, FOSC = 1MHz 14
Magnetic Conversion Time TCONVM 163 33347 µs Programmable Signal Integration, FOSC = 1MHz, single channel 14
Interval Time TINT 0 1260 ms Time in between conversion cycles (FLPOSC = 50kHz) 14
Trigger Pulse Width TTRIG 0.01 250 µs Active High 14
Temperature Sensor Linearity TLIN -2 2 °C 15
Temperature Sensor Accuracy TACC 0 10 °C TA ≤ 35°C 15
Temperature Sensor Accuracy TACC -1 7 °C TA > 35°C 15
Voltage Linearity VLIN -20 20 mV 15
Voltage Accuracy VACC -200 200 mV 15
Offset X0, Y0, Z0 -150 150 LSB16 TA within TAMB 17
Sensitivity Accuracy X- or Y-axis -8 8 % TA = 35°C 17
Sensitivity Accuracy Z-axis -10 10 % TA = 35°C 17
Sensitivity Temperature Coefficient X- or Y-axis TCSXY -500 500 ppm/°C TA within TAMB 17
Sensitivity Temperature Coefficient Z-axis TCSZ -600 600 ppm/°C TA within TAMB 17
Mismatch on the Raw Signals X, Y and Z SMISMXY -2 2 % TA = 35°C 17
Sensitivity X- or Y-axis SXX50 2.5 µT/LSB16 Sensing range 50 mT 17
Sensitivity Z-axis SZZ50 2.5 µT/LSB16 Sensing range 50 mT 17
Junction to Case θjc 21 K/W 56
Junction to Ambient θja 185 K/W JEDEC 1s2p board 56
Junction to Ambient θja 213 K/W JEDEC 1s0p board 56

CAD (KiCad official)

  • Symbol: MLX90395KLW-BBA-001-SP
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: QFN-16(3x3) (KiCad packages3D, STEP)
  • 3D model files: mlx90395klw-bba-001-sp-etched.step / mlx90395klw-bba-001-sp-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mlx90395klw-bba-001-sp.step / mlx90395klw-bba-001-sp.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Melexis datasheet (57 pp, sha256 9fc54f6d8bd358f0, retrieved 2026-10-28, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF