main
Ray Publish 0.1.0 f3c67e8

MLX90372GDC-ACE-300-RE

Melexis · Angle, Linear Position Sensors · SOIC-8

MLX90372GDC-ACE-300-RE from Melexis, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Supply pin; absolute maximum VDD is 28 V for under 48 h (Tj < 175°C) and 37 V for under 60 s (TAMB ≤ 35°C), with reverse voltage protection to -14 V for under 48 h.
2 Input input For test or application use; internally grounded in application, with absolute input pin limits of 6 V positive and -3 V reverse, and unused pins should be connected to PCB ground for EMC.
3 Test input For test or application use; internally grounded in application, with absolute test pin limits of 3.6 V positive and -0.3 V reverse, and unused pins should be connected to PCB ground for EMC.
4 N.C. unconnected Not connected.
5 OUT output Output pin carrying the SENT or PWM digital signal; absolute limits are 28 V positive for under 48 h and -14 V reverse for under 48 h.
6 VSS power_in Digital ground reference for the device.
7 VDEC passive Decoupling pin for the internal voltage; the internal VDEC is rated at a maximum of 3.6 V with a reverse limit of -0.3 V.
8 VSS power_in Analog ground reference for the device.

Key specifications

Parameter Value
Manufacturer Melexis
Package SOIC-8
Category Sensors
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VDD 28 V < 48h ; Tj < 175°C 11
Supply Voltage VDD 37 V < 60s ; TAMB ≤ 35°C 11
Reverse Voltage Protection VDD-rev -14 V < 48h 11
Reverse Voltage Protection VDD-rev -20 V < 1h 11
Positive Output Voltage VOUT 28 V < 48h 11
Reverse Output Voltage VOUT-rev -14 V < 48h 11
Internal Voltage VDEC 3.6 V 11
Reverse Internal Voltage VDEC-rev -0.3 V 11
Positive Input pin Voltage VInput 6 V 11
Reverse Input pin Voltage VInput-rev -3 V 11
Positive Test pin Voltage VTest 3.6 V 11
Reverse Test pin Voltage VTest-rev -0.3 V 11
Operating Temperature TAMB -40 160 °C 11
Junction Temperature TJ 175 °C see 18.17 for package thermal dissipation values 11
Storage Temperature TST -55 170 °C 11
Magnetic Flux Density Bmax -1 1 T 11
Supply Voltage VDD 4.5 5 5.5 V For voltage regulated mode 12
Supply Voltage Battery VDD 6 12 18 V For Battery usage 12
Supply Current IDD 8 9 10.5 mA Legacy applications (option code -300) 12
Surge Current Isurge 30 40 mA IC Startup current (tstartup < 40µs) 12
Start-up Level VDDstart 3.6 V Minimal supply start-up voltage 12
PTC Entry Level (rising) VPROV0 7.1 7.35 7.7 V Supply overvoltage detection for 5V applications 12
PTC Entry Level Hysteresis VPROV0Hyst 400 500 600 mV Supply overvoltage hysteresis 12
PTC Entry Level (rising) VPROV1 21.5 23 24.5 V For Battery usage 12
PTC Entry Level Hysteresis VPROV1Hyst 0.8 1.4 2 V For Battery usage 12
Undervoltage detection high threshold VDDUVH 3.95 4.1 4.25 V Supply undervoltage high threshold 12
Undervoltage detection low threshold VDDUVL 3.75 3.9 4.05 V Supply undervoltage low threshold 12
Regulated Voltage VDEC 3.2 3.3 3.4 V Internal analog voltage 12
Regulated Voltage Overvoltage detection VDECOVH 3.65 3.75 3.85 V High threshold 12
Regulated Voltage Undervoltage detection VDECUVL 2.7 2.85 2.92 V Low threshold 12
Regulated voltage UV / OV detection hysteresis VDECOVHyst / VDECUVHyst 100 150 200 mV 12
Digital supply VDDD 1.8 1.85 1.95 V 12
Digital supply Overvoltage detection VDDDOVH 2 2.1 2.2 V 12
Digital Supply Undervoltage detection VDDDUVL 1.585 1.68 1.735 V Power-on Reset low threshold 12
Output Short Circuit Current IOUTshortPP -25 10 mA Push-pull modes (SENT, PWM); VOUT = 0 V 13
Output Short Circuit Current IOUTshortPP -10 25 mA Push-pull modes (SENT, PWM); VOUT = 5 V .. 18V 13
Output Short Circuit Current SENT Open Drain IOUTshortOD1 10 25 mA SENT Open Drain; VOUT = 5V 13
Output Short Circuit Current PWM Open Drain IOUTshortOD2 25 90 mA PWM mode Open Drain only 13
Output Load RL 3 kΩ PWM pull-up to 5V, PWM pull-down to 0V 13
Output Load SENT pull-up RL 10 55 kΩ SENT pull-up 13
Output Load Open drain pull-up RL 1 100 kΩ Open drain pull-up 13
Digital push-pull output level low VsatLoPP 0 1 %VDD RL ≥ 10kΩ 13
Digital push-pull output level low VsatLoPP 2 5 %VDD RL ≥ 3kΩ, pull-up to 5V 13
Digital push-pull output level high VsatHiPP 98 99 100 %VDD RL ≥ 10kΩ 13
Digital push-pull output level high VsatHiPP 95 100 %VDD RL ≥ 3kΩ, pull-down 13
Digital open drain output level low VsatLoOD 0 10 %Vext Pull-up to any external voltage Vext ≤ 18V, IL ≤ 3.4mA 13
Digital output Ron Ron 27 50 100 Ω ACC and ACE chip revision. Push-pull mode 13
Main Clock Frequency FCK 22.8 24 25.2 MHz Including thermal and lifetime drift 14
Main Clock relative tolerance -5 5 %Fck Relative tolerances, including thermal and lifetime drift 14
Main Clock initial tolerances ΔFCK,0 23.75 24 24.25 MHz T=35°C 14
Main Clock Frequency Thermal Drift ΔFCK,T -2 2 %Fck Relative to clock frequency at 35°C. No ageing effects. 14
Intelligent Watchdog Timeout TIWD 19 20 21 ms FCK = 24MHz 14
Fail Safe state duration TFSS 9.8 11 11.9 ms After a digital single-event fault; ACE / ADE versions 14
Safe Startup Time TSafeStup 11.2 12.4 ms Only valid for ACE / ADE versions 14
Internal Angle Measurement Period TangleMeas 528 588 μs Typical is default factory settings (no user control) 15
PWM Frequency FPWM 100 1000 2000 Hz 22
PWM Frequency Initial Tolerances ΔFPWM,0 -1.5 1.5 %FPWM T=35°C, can be trimmed at EOL 22
PWM Frequency Drift ΔFPWM -5 5 %FPWM Over temperature and lifetime 22
Rise Time PWM 1 4.8 12 μs typ. for SENT_SEL_SR_RISE/FALL = 4 (see 11.1.6). Measured between 1.1V and 3.8V 22
Fall Time PWM 1 4.8 12 μs typ. for SENT_SEL_SR_RISE/FALL = 4 (see 11.1.6). Measured between 1.1V and 3.8V 22

CAD (KiCad official)

  • Symbol: MLX90372GDC-ACE-300-RE
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: mlx90372gdc-ace-300-re-etched.step / mlx90372gdc-ace-300-re-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mlx90372gdc-ace-300-re.step / mlx90372gdc-ace-300-re.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Melexis datasheet (85 pp, sha256 2004e76042962923, retrieved 2026-11-12, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF