Generated by kicad-footprint-generator · KiCad file format 20260206
MLX90372GDC-ACE-300-RE
Melexis · Angle, Linear Position Sensors · SOIC-8
MLX90372GDC-ACE-300-RE from Melexis, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Supply pin; absolute maximum VDD is 28 V for under 48 h (Tj < 175°C) and 37 V for under 60 s (TAMB ≤ 35°C), with reverse voltage protection to -14 V for under 48 h. |
| 2 | Input | input | For test or application use; internally grounded in application, with absolute input pin limits of 6 V positive and -3 V reverse, and unused pins should be connected to PCB ground for EMC. |
| 3 | Test | input | For test or application use; internally grounded in application, with absolute test pin limits of 3.6 V positive and -0.3 V reverse, and unused pins should be connected to PCB ground for EMC. |
| 4 | N.C. | unconnected | Not connected. |
| 5 | OUT | output | Output pin carrying the SENT or PWM digital signal; absolute limits are 28 V positive for under 48 h and -14 V reverse for under 48 h. |
| 6 | VSS | power_in | Digital ground reference for the device. |
| 7 | VDEC | passive | Decoupling pin for the internal voltage; the internal VDEC is rated at a maximum of 3.6 V with a reverse limit of -0.3 V. |
| 8 | VSS | power_in | Analog ground reference for the device. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Melexis |
| Package | SOIC-8 |
| Category | Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 28 | V | < 48h ; Tj < 175°C | 11 | ||
| Supply Voltage | VDD | 37 | V | < 60s ; TAMB ≤ 35°C | 11 | ||
| Reverse Voltage Protection | VDD-rev | -14 | V | < 48h | 11 | ||
| Reverse Voltage Protection | VDD-rev | -20 | V | < 1h | 11 | ||
| Positive Output Voltage | VOUT | 28 | V | < 48h | 11 | ||
| Reverse Output Voltage | VOUT-rev | -14 | V | < 48h | 11 | ||
| Internal Voltage | VDEC | 3.6 | V | 11 | |||
| Reverse Internal Voltage | VDEC-rev | -0.3 | V | 11 | |||
| Positive Input pin Voltage | VInput | 6 | V | 11 | |||
| Reverse Input pin Voltage | VInput-rev | -3 | V | 11 | |||
| Positive Test pin Voltage | VTest | 3.6 | V | 11 | |||
| Reverse Test pin Voltage | VTest-rev | -0.3 | V | 11 | |||
| Operating Temperature | TAMB | -40 | 160 | °C | 11 | ||
| Junction Temperature | TJ | 175 | °C | see 18.17 for package thermal dissipation values | 11 | ||
| Storage Temperature | TST | -55 | 170 | °C | 11 | ||
| Magnetic Flux Density | Bmax | -1 | 1 | T | 11 | ||
| Supply Voltage | VDD | 4.5 | 5 | 5.5 | V | For voltage regulated mode | 12 |
| Supply Voltage Battery | VDD | 6 | 12 | 18 | V | For Battery usage | 12 |
| Supply Current | IDD | 8 | 9 | 10.5 | mA | Legacy applications (option code -300) | 12 |
| Surge Current | Isurge | 30 | 40 | mA | IC Startup current (tstartup < 40µs) | 12 | |
| Start-up Level | VDDstart | 3.6 | V | Minimal supply start-up voltage | 12 | ||
| PTC Entry Level (rising) | VPROV0 | 7.1 | 7.35 | 7.7 | V | Supply overvoltage detection for 5V applications | 12 |
| PTC Entry Level Hysteresis | VPROV0Hyst | 400 | 500 | 600 | mV | Supply overvoltage hysteresis | 12 |
| PTC Entry Level (rising) | VPROV1 | 21.5 | 23 | 24.5 | V | For Battery usage | 12 |
| PTC Entry Level Hysteresis | VPROV1Hyst | 0.8 | 1.4 | 2 | V | For Battery usage | 12 |
| Undervoltage detection high threshold | VDDUVH | 3.95 | 4.1 | 4.25 | V | Supply undervoltage high threshold | 12 |
| Undervoltage detection low threshold | VDDUVL | 3.75 | 3.9 | 4.05 | V | Supply undervoltage low threshold | 12 |
| Regulated Voltage | VDEC | 3.2 | 3.3 | 3.4 | V | Internal analog voltage | 12 |
| Regulated Voltage Overvoltage detection | VDECOVH | 3.65 | 3.75 | 3.85 | V | High threshold | 12 |
| Regulated Voltage Undervoltage detection | VDECUVL | 2.7 | 2.85 | 2.92 | V | Low threshold | 12 |
| Regulated voltage UV / OV detection hysteresis | VDECOVHyst / VDECUVHyst | 100 | 150 | 200 | mV | 12 | |
| Digital supply | VDDD | 1.8 | 1.85 | 1.95 | V | 12 | |
| Digital supply Overvoltage detection | VDDDOVH | 2 | 2.1 | 2.2 | V | 12 | |
| Digital Supply Undervoltage detection | VDDDUVL | 1.585 | 1.68 | 1.735 | V | Power-on Reset low threshold | 12 |
| Output Short Circuit Current | IOUTshortPP | -25 | 10 | mA | Push-pull modes (SENT, PWM); VOUT = 0 V | 13 | |
| Output Short Circuit Current | IOUTshortPP | -10 | 25 | mA | Push-pull modes (SENT, PWM); VOUT = 5 V .. 18V | 13 | |
| Output Short Circuit Current SENT Open Drain | IOUTshortOD1 | 10 | 25 | mA | SENT Open Drain; VOUT = 5V | 13 | |
| Output Short Circuit Current PWM Open Drain | IOUTshortOD2 | 25 | 90 | mA | PWM mode Open Drain only | 13 | |
| Output Load | RL | 3 | kΩ | PWM pull-up to 5V, PWM pull-down to 0V | 13 | ||
| Output Load SENT pull-up | RL | 10 | 55 | kΩ | SENT pull-up | 13 | |
| Output Load Open drain pull-up | RL | 1 | 100 | kΩ | Open drain pull-up | 13 | |
| Digital push-pull output level low | VsatLoPP | 0 | 1 | %VDD | RL ≥ 10kΩ | 13 | |
| Digital push-pull output level low | VsatLoPP | 2 | 5 | %VDD | RL ≥ 3kΩ, pull-up to 5V | 13 | |
| Digital push-pull output level high | VsatHiPP | 98 | 99 | 100 | %VDD | RL ≥ 10kΩ | 13 |
| Digital push-pull output level high | VsatHiPP | 95 | 100 | %VDD | RL ≥ 3kΩ, pull-down | 13 | |
| Digital open drain output level low | VsatLoOD | 0 | 10 | %Vext | Pull-up to any external voltage Vext ≤ 18V, IL ≤ 3.4mA | 13 | |
| Digital output Ron | Ron | 27 | 50 | 100 | Ω | ACC and ACE chip revision. Push-pull mode | 13 |
| Main Clock Frequency | FCK | 22.8 | 24 | 25.2 | MHz | Including thermal and lifetime drift | 14 |
| Main Clock relative tolerance | -5 | 5 | %Fck | Relative tolerances, including thermal and lifetime drift | 14 | ||
| Main Clock initial tolerances | ΔFCK,0 | 23.75 | 24 | 24.25 | MHz | T=35°C | 14 |
| Main Clock Frequency Thermal Drift | ΔFCK,T | -2 | 2 | %Fck | Relative to clock frequency at 35°C. No ageing effects. | 14 | |
| Intelligent Watchdog Timeout | TIWD | 19 | 20 | 21 | ms | FCK = 24MHz | 14 |
| Fail Safe state duration | TFSS | 9.8 | 11 | 11.9 | ms | After a digital single-event fault; ACE / ADE versions | 14 |
| Safe Startup Time | TSafeStup | 11.2 | 12.4 | ms | Only valid for ACE / ADE versions | 14 | |
| Internal Angle Measurement Period | TangleMeas | 528 | 588 | μs | Typical is default factory settings (no user control) | 15 | |
| PWM Frequency | FPWM | 100 | 1000 | 2000 | Hz | 22 | |
| PWM Frequency Initial Tolerances | ΔFPWM,0 | -1.5 | 1.5 | %FPWM | T=35°C, can be trimmed at EOL | 22 | |
| PWM Frequency Drift | ΔFPWM | -5 | 5 | %FPWM | Over temperature and lifetime | 22 | |
| Rise Time PWM | 1 | 4.8 | 12 | μs | typ. for SENT_SEL_SR_RISE/FALL = 4 (see 11.1.6). Measured between 1.1V and 3.8V | 22 | |
| Fall Time PWM | 1 | 4.8 | 12 | μs | typ. for SENT_SEL_SR_RISE/FALL = 4 (see 11.1.6). Measured between 1.1V and 3.8V | 22 |
CAD (KiCad official)
- Symbol:
MLX90372GDC-ACE-300-RE - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
mlx90372gdc-ace-300-re-etched.step/mlx90372gdc-ace-300-re-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mlx90372gdc-ace-300-re.step/mlx90372gdc-ace-300-re.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Melexis datasheet (85 pp, sha256
2004e76042962923, retrieved 2026-11-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).