main
Ray Publish 0.1.0 f5a7714

MLX90371GGO-BCC-300-RE

Melexis · Angle, Linear Position Sensors · TSSOP-16

MLX90371GGO-BCC-300-RE from Melexis, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDEC1 passive Decoupling pin for the on-chip regulator of die 1.
2 VSSA1 power_in Analog ground of die 1.
3 VDD1 power_in Supply pin of die 1.
4 Test Input1 input Test input of die 1, recommended to be connected to ground for optimal EMC behavior.
5 Test2 passive Test pin of die 2, recommended to be connected to ground for optimal EMC behavior.
6 OUT2 output Analog (ratiometric) or PWM output of die 2.
7 Not Used2 unconnected Not used pin of die 2, recommended to be connected to ground for optimal EMC behavior.
8 VSSD2 power_in Digital ground of die 2.
9 VDEC2 passive Decoupling pin for the on-chip regulator of die 2.
10 VSSA2 power_in Analog ground of die 2.
11 VDD2 power_in Supply pin of die 2.
12 Test Input2 input Test input of die 2, recommended to be connected to ground for optimal EMC behavior.
13 Test1 passive Test pin of die 1, recommended to be connected to ground for optimal EMC behavior.
14 Not Used1 unconnected Not used pin of die 1, recommended to be connected to ground for optimal EMC behavior.
15 OUT1 output Analog (ratiometric) or PWM output of die 1.
16 VSSD1 power_in Digital ground of die 1.

Key specifications

Parameter Value
Manufacturer Melexis
Package TSSOP-16
Category Sensors
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VDD 4.5 5 5.5 V 13
Supply Current (Standard/Legacy mode) IDD 6 9 10 mA Standard/Legacy mode, no resistive load at OUT PIN (OUT1 and OUT2 for TSSOP-16 package) 13
Start-up Level (rising) 3.95 4.1 4.25 V 13
Start-up Hysteresis 100 200 300 mV 13
PTC Entry Level (rising) 6.2 6.5 6.8 V 13
PTC Entry Level Hysteresis 400 500 600 mV 13
Output Short Circuit Current Ishort -25 -10 mA VOUT = 0 V 13
Output Short Circuit Current Ishort 10 25 mA VOUT = 5 V or 18 V 13
Output Load, analog mode RL 5 kΩ Analog mode 13
Output Load, digital mode RL 2 kΩ Digital (PWM) mode 13
Analog Saturation Output Level low VsatA_lo 0.5 1 %VDD Pull-up load RL ≥ 10 kΩ to 5 V 13
Analog Saturation Output Level low VsatA_lo 3.5 5 %VDD Pull-up load RL ≥ 5 kΩ to 18 V 13
Analog Saturation Output Level high VsatA_hi 96 97 %VDD Pull-down load RL ≥ 5 kΩ 13
Analog Saturation Output Level high VsatA_hi 97.5 98 %VDD Pull-down load RL ≥ 10 kΩ 13
Digital (PWM) Output Level low VsatD_lo 0.5 1 %VDD Pull-up load RL ≥ 10 kΩ to 5 V 13
Digital (PWM) Output Level low VsatD_lo 3.5 5 %VDD Pull-up load RL ≥ 5 kΩ to 18 V 13
Digital (PWM) Output Level low VsatD_lo 2.5 4 %VDD Pull-up load RL ≥ 2kΩ to 5 V 13
Digital (PWM) Output Level high VsatD_hi 85 90 %VDD Pull-down load RL ≥ 2 kΩ 13
Digital (PWM) Output Level high VsatD_hi 96 97 %VDD Pull-down load RL ≥ 5 kΩ 13
Digital (PWM) Output Level high VsatD_hi 97.5 98 %VDD Pull-down load RL ≥ 10 kΩ 13
PWM Frequency FPWM 150 2000 Hz Ck = 18MHz 17
PWM Frequency tolerance ∆FPWM -5 5 %FPWM Including thermal drift and aging 17
PWM Frequency Thermal Drift ∆T FPWM -3 3 %FPWM 17
Start-up Time (analog) τSU 5 ms Analog mode 16
Start-up Time (PWM) τSU 5 ms PWM mode @1kHz 17
Start-up Time (PWM) τSU 15 ms PMW mode @150Hz 17
Isolation Resistance 4 MΩ Between dice 12
Magnetic Flux Density in X or Y BX, BY 70 mT √(BX²+BY²); must be fulfilled for at least one field BX or BY 22
Magnetic Flux Density in Z BZ 100 mT 22
Magnetic Flux Norm 10 mT X-Y, X-Z or Y-Z mode norm 22
Magnet Temperature Coefficient TCm -2400 0 ppm/Deg.C 22
Field Too Low Threshold BTH_LOW 3.4 5 6.6 mT corresponding to TCm=0 22
Field Too High Threshold BTH_HIGH 70 100 130 mT corresponding to TCm=0. 22
IMC gain GIMC 1.19 22
Supply Voltage (absolute maximum) VDD 28 V <48h 12
Supply Voltage (absolute maximum) VDD 45 V <1min 12
Reverse Voltage Protection VDDREV -14 V At Room Temperature; <48h 12
Positive Output Voltage VOUT 18 V <48h 12
Output Current IOUT -30 30 mA -1.5V< VOUT <40V 12
Reverse Output Voltage VOUTREV -0.3 V <48h 12
Operating Temperature TAMB -40 160 °C Refer to the qualification profile 12
Junction Temperature TJUNC 175 °C 12
Storage Temperature TST -55 170 °C Refer to the qualification profile 12
Magnetic Flux Density -1 1 T 12

CAD (KiCad official)

  • Symbol: MLX90371GGO-BCC-300-RE
  • Footprint: Package_SO:TSSOP-16_4.4x5mm_P0.65mm
  • 3D model: TSSOP-16 (KiCad packages3D, STEP)
  • 3D model files: mlx90371ggo-bcc-300-re-etched.step / mlx90371ggo-bcc-300-re-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mlx90371ggo-bcc-300-re.step / mlx90371ggo-bcc-300-re.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Melexis datasheet (68 pp, sha256 70a96fa19159f008, retrieved 2026-11-02, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF