3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMLX90371GGO-BCC-300-RE
Melexis · Angle, Linear Position Sensors · TSSOP-16
MLX90371GGO-BCC-300-RE from Melexis, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDEC1 | passive | Decoupling pin for the on-chip regulator of die 1. |
| 2 | VSSA1 | power_in | Analog ground of die 1. |
| 3 | VDD1 | power_in | Supply pin of die 1. |
| 4 | Test Input1 | input | Test input of die 1, recommended to be connected to ground for optimal EMC behavior. |
| 5 | Test2 | passive | Test pin of die 2, recommended to be connected to ground for optimal EMC behavior. |
| 6 | OUT2 | output | Analog (ratiometric) or PWM output of die 2. |
| 7 | Not Used2 | unconnected | Not used pin of die 2, recommended to be connected to ground for optimal EMC behavior. |
| 8 | VSSD2 | power_in | Digital ground of die 2. |
| 9 | VDEC2 | passive | Decoupling pin for the on-chip regulator of die 2. |
| 10 | VSSA2 | power_in | Analog ground of die 2. |
| 11 | VDD2 | power_in | Supply pin of die 2. |
| 12 | Test Input2 | input | Test input of die 2, recommended to be connected to ground for optimal EMC behavior. |
| 13 | Test1 | passive | Test pin of die 1, recommended to be connected to ground for optimal EMC behavior. |
| 14 | Not Used1 | unconnected | Not used pin of die 1, recommended to be connected to ground for optimal EMC behavior. |
| 15 | OUT1 | output | Analog (ratiometric) or PWM output of die 1. |
| 16 | VSSD1 | power_in | Digital ground of die 1. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Melexis |
| Package | TSSOP-16 |
| Category | Sensors |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 4.5 | 5 | 5.5 | V | 13 | |
| Supply Current (Standard/Legacy mode) | IDD | 6 | 9 | 10 | mA | Standard/Legacy mode, no resistive load at OUT PIN (OUT1 and OUT2 for TSSOP-16 package) | 13 |
| Start-up Level (rising) | 3.95 | 4.1 | 4.25 | V | 13 | ||
| Start-up Hysteresis | 100 | 200 | 300 | mV | 13 | ||
| PTC Entry Level (rising) | 6.2 | 6.5 | 6.8 | V | 13 | ||
| PTC Entry Level Hysteresis | 400 | 500 | 600 | mV | 13 | ||
| Output Short Circuit Current | Ishort | -25 | -10 | mA | VOUT = 0 V | 13 | |
| Output Short Circuit Current | Ishort | 10 | 25 | mA | VOUT = 5 V or 18 V | 13 | |
| Output Load, analog mode | RL | 5 | kΩ | Analog mode | 13 | ||
| Output Load, digital mode | RL | 2 | kΩ | Digital (PWM) mode | 13 | ||
| Analog Saturation Output Level low | VsatA_lo | 0.5 | 1 | %VDD | Pull-up load RL ≥ 10 kΩ to 5 V | 13 | |
| Analog Saturation Output Level low | VsatA_lo | 3.5 | 5 | %VDD | Pull-up load RL ≥ 5 kΩ to 18 V | 13 | |
| Analog Saturation Output Level high | VsatA_hi | 96 | 97 | %VDD | Pull-down load RL ≥ 5 kΩ | 13 | |
| Analog Saturation Output Level high | VsatA_hi | 97.5 | 98 | %VDD | Pull-down load RL ≥ 10 kΩ | 13 | |
| Digital (PWM) Output Level low | VsatD_lo | 0.5 | 1 | %VDD | Pull-up load RL ≥ 10 kΩ to 5 V | 13 | |
| Digital (PWM) Output Level low | VsatD_lo | 3.5 | 5 | %VDD | Pull-up load RL ≥ 5 kΩ to 18 V | 13 | |
| Digital (PWM) Output Level low | VsatD_lo | 2.5 | 4 | %VDD | Pull-up load RL ≥ 2kΩ to 5 V | 13 | |
| Digital (PWM) Output Level high | VsatD_hi | 85 | 90 | %VDD | Pull-down load RL ≥ 2 kΩ | 13 | |
| Digital (PWM) Output Level high | VsatD_hi | 96 | 97 | %VDD | Pull-down load RL ≥ 5 kΩ | 13 | |
| Digital (PWM) Output Level high | VsatD_hi | 97.5 | 98 | %VDD | Pull-down load RL ≥ 10 kΩ | 13 | |
| PWM Frequency | FPWM | 150 | 2000 | Hz | Ck = 18MHz | 17 | |
| PWM Frequency tolerance | ∆FPWM | -5 | 5 | %FPWM | Including thermal drift and aging | 17 | |
| PWM Frequency Thermal Drift | ∆T FPWM | -3 | 3 | %FPWM | 17 | ||
| Start-up Time (analog) | τSU | 5 | ms | Analog mode | 16 | ||
| Start-up Time (PWM) | τSU | 5 | ms | PWM mode @1kHz | 17 | ||
| Start-up Time (PWM) | τSU | 15 | ms | PMW mode @150Hz | 17 | ||
| Isolation Resistance | 4 | MΩ | Between dice | 12 | |||
| Magnetic Flux Density in X or Y | BX, BY | 70 | mT | √(BX²+BY²); must be fulfilled for at least one field BX or BY | 22 | ||
| Magnetic Flux Density in Z | BZ | 100 | mT | 22 | |||
| Magnetic Flux Norm | 10 | mT | X-Y, X-Z or Y-Z mode norm | 22 | |||
| Magnet Temperature Coefficient | TCm | -2400 | 0 | ppm/Deg.C | 22 | ||
| Field Too Low Threshold | BTH_LOW | 3.4 | 5 | 6.6 | mT | corresponding to TCm=0 | 22 |
| Field Too High Threshold | BTH_HIGH | 70 | 100 | 130 | mT | corresponding to TCm=0. | 22 |
| IMC gain | GIMC | 1.19 | 22 | ||||
| Supply Voltage (absolute maximum) | VDD | 28 | V | <48h | 12 | ||
| Supply Voltage (absolute maximum) | VDD | 45 | V | <1min | 12 | ||
| Reverse Voltage Protection | VDDREV | -14 | V | At Room Temperature; <48h | 12 | ||
| Positive Output Voltage | VOUT | 18 | V | <48h | 12 | ||
| Output Current | IOUT | -30 | 30 | mA | -1.5V< VOUT <40V | 12 | |
| Reverse Output Voltage | VOUTREV | -0.3 | V | <48h | 12 | ||
| Operating Temperature | TAMB | -40 | 160 | °C | Refer to the qualification profile | 12 | |
| Junction Temperature | TJUNC | 175 | °C | 12 | |||
| Storage Temperature | TST | -55 | 170 | °C | Refer to the qualification profile | 12 | |
| Magnetic Flux Density | -1 | 1 | T | 12 |
CAD (KiCad official)
- Symbol:
MLX90371GGO-BCC-300-RE - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
mlx90371ggo-bcc-300-re-etched.step/mlx90371ggo-bcc-300-re-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mlx90371ggo-bcc-300-re.step/mlx90371ggo-bcc-300-re.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Melexis datasheet (68 pp, sha256
70a96fa19159f008, retrieved 2026-11-02, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).