main
Ray Publish 0.1.0 0f6d11e

MLX90316KGO-BCG-000-RE

Melexis · Angle, Linear Position Sensors · TSSOP-16

MLX90316KGO-BCG-000-RE from Melexis, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDIG1 passive Internal 3.3 V digital regulator node of die 1 (VDIG), listed as VDIG1 for both analog/PWM and serial protocol modes.
2 VSS1 power_in Ground of die 1 (VSS1).
3 VDD1 power_in Supply of die 1; absolute maximum +20 V overvoltage and -10 V reverse voltage.
4 Test 01 passive Test 0 pin of die 1; recommended to be connected to ground for optimal EMC behavior.
5 Switch OUT2 output Switch output in Analog/PWM mode (/SS2 slave select input in serial protocol mode), as printed with suffix 2; switch out absolute maximum +10 V.
6 Not Used2 unconnected Not used in Analog/PWM mode (SCLK2 in serial protocol mode); recommended to be connected to ground for optimal EMC behavior.
7 OUT2 output Output in Analog/PWM mode (MOSI2/MISO2 in serial protocol mode), as printed with suffix 2; output current max ±30 mA.
8 Test 12 passive Test 1 pin as printed with suffix 2; recommended to be connected to ground for optimal EMC behavior.
9 VDIG2 passive Internal 3.3 V digital regulator node of die 2 (VDIG2).
10 VSS2 power_in Ground of die 2 (VSS2).
11 VDD2 power_in Supply of die 2; absolute maximum +20 V overvoltage and -10 V reverse voltage.
12 Test 02 passive Test 0 pin of die 2; recommended to be connected to ground for optimal EMC behavior.
13 Switch OUT1 output Switch output of die 1 in Analog/PWM mode (/SS1 in serial protocol mode); switch out absolute maximum +10 V.
14 Not Used1 unconnected Not used in Analog/PWM mode (SCLK1 in serial protocol mode); recommended to be connected to ground for optimal EMC behavior.
15 OUT1 output Analog/PWM output of die 1 (MOSI1/MISO1 in serial protocol mode); output current max ±30 mA.
16 Test 11 passive Test 1 pin of die 1; recommended to be connected to ground for optimal EMC behavior.

Key specifications

Parameter Value
Manufacturer Melexis
Package TSSOP-16
Category Sensors
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage (overvoltage) VDD 20 V 9
Reverse Voltage Protection -10 V 9
Positive Output Voltage Standard (Analog or PWM) 10 V +14 V (200 s max, TA = +25 Deg.C) 9
Positive Output Voltage Switch Out 10 V +14 V (200 s max, TA = +25 Deg.C) 9
Output Current IOUT -30 30 mA 9
Reverse Output Voltage -0.3 V 9
Reverse Output Current -50 mA 9
Operating Ambient Temperature Range TA -40 150 Deg.C 9
Storage Temperature Range TS -40 150 Deg.C 9
Magnetic Flux Density -700 700 mT 9
Operating temperature, suffix K TA -40 125 Deg.C Temperature code K 6
Nominal Supply Voltage VDD 4.5 5 5.5 V 10
Supply Current, slow mode IDD 8.5 11 mA Slow mode, per die 10
Supply Current, fast mode IDD 13.5 16 mA Fast mode, per die 10
POR Level VDD POR 2 2.7 3 V Supply Under Voltage 10
Output Current, analog IOUT -8 8 mA Analog Output mode 10
Output Current, PWM IOUT -20 20 mA PWM Output mode 10
Output Short Circuit Current to 0 V Ishort 12 15 mA VOUT = 0 V 10
Output Short Circuit Current to 5 V Ishort 12 15 mA VOUT = 5 V 10
Output Short Circuit Current to 14 V Ishort 24 45 mA VOUT = 14 V (TA = 25 Deg.C) 10
Output Load, pull-down to ground RL 1 10 kΩ Pull-down to Ground 10
Output Load, pull-up to 5V RL 1 10 kΩ Pull-up to 5V 10
Analog Saturation Output Level low Vsat_lo 3 %VDD Pull-up load RL ≥ 10 kΩ 10
Analog Saturation Output Level high Vsat_hi 96 %VDD Pull-down load RL ≥ 10 kΩ 10
Digital Saturation Output Level low VsatD_lo 1.5 %VDD Pull-up Low Side RL ≥ 10 kΩ; Push-Pull (IOUT = -20mA) 10
Digital Saturation Output Level high VsatD_hi 97 %VDD Push-Pull (IOUT = 20mA) 10
Active Diagnostic Output Level low, pull-down Diag_lo 1 %VDD Pull-down load RL ≥ 10 kΩ 10
Active Diagnostic Output Level low, pull-up Diag_lo 1.5 %VDD Pull-up load RL ≥ 10 kΩ 10
Active Diagnostic Output Level high, pull-down Diag_hi 97 %VDD Pull-down load RL ≥ 10 kΩ 10
Active Diagnostic Output Level high, pull-up Diag_hi 98 %VDD Pull-up load RL ≥ 10 kΩ 10
Passive Diagnostic Output Level BVSSPD 4 %VDD Broken VSS & Pull-down load RL ≤ 10 kΩ 10
Isolation Resistance Between dice 4 MΩ Dual die version (GO) 12
Main Clock Frequency, slow mode Ck 7 MHz Slow mode 12
Main Clock Frequency, fast mode Ck 20 MHz Fast mode 12
PWM Frequency FPWM 100 1000 Hz PWM Output Enabled 12
Thermal Offset Drift #1 -60 60 LSB15 Temperature suffix S, E and K 13
Thermal Offset Drift #2 -0.3 0.3 %VDD Temperature suffix S, E and K 13
Thermal Drift of Sensitivity Mismatch -0.3 0.3 % Temperature suffix S, E and K 13
Intrinsic Linearity Error Le -1 1 Deg. TA = 25 Deg.C 13
Analog Output Resolution INL INL -4 4 LSB 12 bits DAC (Theoretical, Noise free) 13
Analog Output Resolution DNL DNL -2 2 LSB 12 bits DAC (Theoretical, Noise free) 13
Output stage Noise 0.05 %VDD Clamped Output 13
Noise pk-pk, slow mode 0.03 0.06 Deg. RG = 9, Slow mode, Filter = 5 14
Noise pk-pk, fast mode 0.1 0.2 Deg. RG = 9, Fast mode, Filter = 0 14
Ratiometry Error -0.1 0 0.1 %VDD 14
PWM Jitter JPWM 0.2 %DC RG = 6, FPWM = 250 Hz, 800 Hz 14
Magnetic Flux Density B 20 50 70 mT 14
Magnet Temperature Coefficient TCm -2400 0 ppm/Deg.C 14

CAD (KiCad official)

  • Symbol: MLX90316KGO-BCG-000-RE
  • Footprint: Package_SO:TSSOP-16_4.4x5mm_P0.65mm
  • 3D model: TSSOP-16 (KiCad packages3D, STEP)
  • 3D model files: mlx90316kgo-bcg-000-re-etched.step / mlx90316kgo-bcg-000-re-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mlx90316kgo-bcg-000-re.step / mlx90316kgo-bcg-000-re.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Melexis datasheet (48 pp, sha256 8c422a1033680b85, retrieved 2026-10-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF