Generated by kicad-footprint-generator · KiCad file format 20260206
MLX90316KGO-BCG-000-RE
Melexis · Angle, Linear Position Sensors · TSSOP-16
MLX90316KGO-BCG-000-RE from Melexis, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDIG1 | passive | Internal 3.3 V digital regulator node of die 1 (VDIG), listed as VDIG1 for both analog/PWM and serial protocol modes. |
| 2 | VSS1 | power_in | Ground of die 1 (VSS1). |
| 3 | VDD1 | power_in | Supply of die 1; absolute maximum +20 V overvoltage and -10 V reverse voltage. |
| 4 | Test 01 | passive | Test 0 pin of die 1; recommended to be connected to ground for optimal EMC behavior. |
| 5 | Switch OUT2 | output | Switch output in Analog/PWM mode (/SS2 slave select input in serial protocol mode), as printed with suffix 2; switch out absolute maximum +10 V. |
| 6 | Not Used2 | unconnected | Not used in Analog/PWM mode (SCLK2 in serial protocol mode); recommended to be connected to ground for optimal EMC behavior. |
| 7 | OUT2 | output | Output in Analog/PWM mode (MOSI2/MISO2 in serial protocol mode), as printed with suffix 2; output current max ±30 mA. |
| 8 | Test 12 | passive | Test 1 pin as printed with suffix 2; recommended to be connected to ground for optimal EMC behavior. |
| 9 | VDIG2 | passive | Internal 3.3 V digital regulator node of die 2 (VDIG2). |
| 10 | VSS2 | power_in | Ground of die 2 (VSS2). |
| 11 | VDD2 | power_in | Supply of die 2; absolute maximum +20 V overvoltage and -10 V reverse voltage. |
| 12 | Test 02 | passive | Test 0 pin of die 2; recommended to be connected to ground for optimal EMC behavior. |
| 13 | Switch OUT1 | output | Switch output of die 1 in Analog/PWM mode (/SS1 in serial protocol mode); switch out absolute maximum +10 V. |
| 14 | Not Used1 | unconnected | Not used in Analog/PWM mode (SCLK1 in serial protocol mode); recommended to be connected to ground for optimal EMC behavior. |
| 15 | OUT1 | output | Analog/PWM output of die 1 (MOSI1/MISO1 in serial protocol mode); output current max ±30 mA. |
| 16 | Test 11 | passive | Test 1 pin of die 1; recommended to be connected to ground for optimal EMC behavior. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Melexis |
| Package | TSSOP-16 |
| Category | Sensors |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (overvoltage) | VDD | 20 | V | 9 | |||
| Reverse Voltage Protection | -10 | V | 9 | ||||
| Positive Output Voltage Standard (Analog or PWM) | 10 | V | +14 V (200 s max, TA = +25 Deg.C) | 9 | |||
| Positive Output Voltage Switch Out | 10 | V | +14 V (200 s max, TA = +25 Deg.C) | 9 | |||
| Output Current | IOUT | -30 | 30 | mA | 9 | ||
| Reverse Output Voltage | -0.3 | V | 9 | ||||
| Reverse Output Current | -50 | mA | 9 | ||||
| Operating Ambient Temperature Range | TA | -40 | 150 | Deg.C | 9 | ||
| Storage Temperature Range | TS | -40 | 150 | Deg.C | 9 | ||
| Magnetic Flux Density | -700 | 700 | mT | 9 | |||
| Operating temperature, suffix K | TA | -40 | 125 | Deg.C | Temperature code K | 6 | |
| Nominal Supply Voltage | VDD | 4.5 | 5 | 5.5 | V | 10 | |
| Supply Current, slow mode | IDD | 8.5 | 11 | mA | Slow mode, per die | 10 | |
| Supply Current, fast mode | IDD | 13.5 | 16 | mA | Fast mode, per die | 10 | |
| POR Level | VDD POR | 2 | 2.7 | 3 | V | Supply Under Voltage | 10 |
| Output Current, analog | IOUT | -8 | 8 | mA | Analog Output mode | 10 | |
| Output Current, PWM | IOUT | -20 | 20 | mA | PWM Output mode | 10 | |
| Output Short Circuit Current to 0 V | Ishort | 12 | 15 | mA | VOUT = 0 V | 10 | |
| Output Short Circuit Current to 5 V | Ishort | 12 | 15 | mA | VOUT = 5 V | 10 | |
| Output Short Circuit Current to 14 V | Ishort | 24 | 45 | mA | VOUT = 14 V (TA = 25 Deg.C) | 10 | |
| Output Load, pull-down to ground | RL | 1 | 10 | kΩ | Pull-down to Ground | 10 | |
| Output Load, pull-up to 5V | RL | 1 | 10 | kΩ | Pull-up to 5V | 10 | |
| Analog Saturation Output Level low | Vsat_lo | 3 | %VDD | Pull-up load RL ≥ 10 kΩ | 10 | ||
| Analog Saturation Output Level high | Vsat_hi | 96 | %VDD | Pull-down load RL ≥ 10 kΩ | 10 | ||
| Digital Saturation Output Level low | VsatD_lo | 1.5 | %VDD | Pull-up Low Side RL ≥ 10 kΩ; Push-Pull (IOUT = -20mA) | 10 | ||
| Digital Saturation Output Level high | VsatD_hi | 97 | %VDD | Push-Pull (IOUT = 20mA) | 10 | ||
| Active Diagnostic Output Level low, pull-down | Diag_lo | 1 | %VDD | Pull-down load RL ≥ 10 kΩ | 10 | ||
| Active Diagnostic Output Level low, pull-up | Diag_lo | 1.5 | %VDD | Pull-up load RL ≥ 10 kΩ | 10 | ||
| Active Diagnostic Output Level high, pull-down | Diag_hi | 97 | %VDD | Pull-down load RL ≥ 10 kΩ | 10 | ||
| Active Diagnostic Output Level high, pull-up | Diag_hi | 98 | %VDD | Pull-up load RL ≥ 10 kΩ | 10 | ||
| Passive Diagnostic Output Level | BVSSPD | 4 | %VDD | Broken VSS & Pull-down load RL ≤ 10 kΩ | 10 | ||
| Isolation Resistance Between dice | 4 | MΩ | Dual die version (GO) | 12 | |||
| Main Clock Frequency, slow mode | Ck | 7 | MHz | Slow mode | 12 | ||
| Main Clock Frequency, fast mode | Ck | 20 | MHz | Fast mode | 12 | ||
| PWM Frequency | FPWM | 100 | 1000 | Hz | PWM Output Enabled | 12 | |
| Thermal Offset Drift #1 | -60 | 60 | LSB15 | Temperature suffix S, E and K | 13 | ||
| Thermal Offset Drift #2 | -0.3 | 0.3 | %VDD | Temperature suffix S, E and K | 13 | ||
| Thermal Drift of Sensitivity Mismatch | -0.3 | 0.3 | % | Temperature suffix S, E and K | 13 | ||
| Intrinsic Linearity Error | Le | -1 | 1 | Deg. | TA = 25 Deg.C | 13 | |
| Analog Output Resolution INL | INL | -4 | 4 | LSB | 12 bits DAC (Theoretical, Noise free) | 13 | |
| Analog Output Resolution DNL | DNL | -2 | 2 | LSB | 12 bits DAC (Theoretical, Noise free) | 13 | |
| Output stage Noise | 0.05 | %VDD | Clamped Output | 13 | |||
| Noise pk-pk, slow mode | 0.03 | 0.06 | Deg. | RG = 9, Slow mode, Filter = 5 | 14 | ||
| Noise pk-pk, fast mode | 0.1 | 0.2 | Deg. | RG = 9, Fast mode, Filter = 0 | 14 | ||
| Ratiometry Error | -0.1 | 0 | 0.1 | %VDD | 14 | ||
| PWM Jitter | JPWM | 0.2 | %DC | RG = 6, FPWM = 250 Hz, 800 Hz | 14 | ||
| Magnetic Flux Density | B | 20 | 50 | 70 | mT | 14 | |
| Magnet Temperature Coefficient | TCm | -2400 | 0 | ppm/Deg.C | 14 |
CAD (KiCad official)
- Symbol:
MLX90316KGO-BCG-000-RE - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
mlx90316kgo-bcg-000-re-etched.step/mlx90316kgo-bcg-000-re-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mlx90316kgo-bcg-000-re.step/mlx90316kgo-bcg-000-re.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Melexis datasheet (48 pp, sha256
8c422a1033680b85, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).