main
Ray
Publish 0.1.1
163e646
1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495969798991001011021031041051061071081091101111121131141151161171181191201211221231241251261271281291301311321331341351361371381391401411421431441451461471481491501511521531541551561571581591601611621631641651661671681691701711721731741751761771781791801811821831841851861871881891901911921931941951961971981992002012022032042052062072082092102112122132142152162172182192202212222232242252262272282292302312322332342352362372382392402412422432442452462472482492502512522532542552562572582592602612622632642652662672682692702712722732742752762772782792802812822832842852862872882892902912922932942952962972982993003013023033043053063073083093103113123133143153163173183193203213223233243253263273283293303313323333343353363373383393403413423433443453463473483493503513523533543553563573583593603613623633643653663673683693703713723733743753763773783793803813823833843853863873883893903913923933943953963973983994004014024034044054064074084094104114124134144154164174184194204214224234244254264274284294304314324334344354364374384394404414424434444454464474484494504514524534544554564574584594604614624634644654664674684694704714724734744754764774784794804814824834844854864874884894904914924934944954964974984995005015025035045055065075085095105115125135145155165175185195205215225235245255265275285295305315325335345355365375385395405415425435445455465475485495505515525535545555565575585595605615625635645655665675685695705715725735745755765775785795805815825835845855865875885895905915925935945955965975985996006016026036046056066076086096106116126136146156166176186196206216226236246256266276286296306316326336346356366376386396406416426436446456466476486496506516526536546556566576586596606616626636646656666676686696706716726736746756766776786796806816826836846856866876886896906916926936946956966976986997007017027037047057067077087097107117127137147157167177187197207217227237247257267277287297307317327337347357367377387397407417427437447457467477487497507517527537547557567577587597607617627637647657667677687697707717727737747757767777787797807817827837847857867877887897907917927937947957967977987998008018028038048058068078088098108118128138148158168178188198208218228238248258268278288298308318328338348358368378388398408418428438448458468478488498508518528538548558568578588598608618628638648658668678688698708718728738748758768778788798808818828838848858868878888898908918928938948958968978988999009019029039049059069079089099109119129139149159169179189199209219229239249259269279289299309319329339349359369379389399409419429439449459469479489499509519529539549559569579589599609619629639649659669679689699709719729739749759769779789799809819829839849859869879889899909919929939949959969979989991000100110021003100410051006100710081009101010111012101310141015101610171018101910201021102210231024102510261027102810291030103110321033103410351036103710381039104010411042104310441045104610471048104910501051105210531054105510561057105810591060106110621063106410651066106710681069107010711072107310741075107610771078107910801081108210831084108510861087108810891090109110921093109410951096109710981099110011011102110311041105110611071108110911101111111211131114111511161117111811191120112111221123112411251126112711281129113011311132113311341135113611371138113911401141114211431144114511461147114811491150115111521153115411551156115711581159116011611162116311641165116611671168116911701171117211731174117511761177117811791180118111821183118411851186118711881189119011911192119311941195119611971198119912001201120212031204120512061207120812091210121112121213121412151216121712181219122012211222122312241225122612271228122912301231123212331234123512361237123812391240
{
"schema_version": 1,
"type": "component",
"slug": "mks22fn256vlh12",
"title": "MKS22FN256VLH12",
"brief": "NXP Semicon Pre-ordered MCUs, LQFP-64(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.1",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"embedded processors & controllers",
"mks22fn256vlh12",
"factory-2.0.0",
"extractor-text"
],
"component": {
"mpn": "MKS22FN256VLH12",
"manufacturer": "NXP Semicon",
"package": "LQFP-64(10x10)",
"pin_count": 64,
"category": "Embedded Processors & Controllers",
"subcategory": "Pre-ordered MCUs",
"datasheet": "https://www.nxp.com/docs/en/data-sheet/MKS22FN256VLH12.pdf",
"parts": {
"symbol": "mks22fn256vlh12.kicad_sym",
"footprint": "mks22fn256vlh12.kicad_mod",
"model_3d": "mks22fn256vlh12-hero.glb",
"model_3d_plain": "mks22fn256vlh12.glb",
"model_3d_step": "mks22fn256vlh12-etched.step",
"model_3d_step_plain": "mks22fn256vlh12.step",
"lbr": "mks22fn256vlh12.lbr"
},
"distributor_links": {
"lcsc": "C1342294",
"digikey": "568-14474-ND",
"mouser": "841-MKS22FN256VLH12"
},
"distributor_check": {
"checked_at": "2026-10-30T22:01:38Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "568-14474-ND",
"status": "found",
"lifecycle": "Active"
},
"mouser": {
"pn": "841-MKS22FN256VLH12",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "PTE0/CLKOUT32K",
"type": "bidirectional",
"description": "Port E GPIO (standard drive, Hi-Z after POR) with alternate functions ADC0_SE4a, SPI1_PCS1, UART1_TX, LPI2C1_SDA and RTC_CLKOUT (32 kHz clock output)."
},
{
"number": "2",
"name": "PTE1/LLWU_P0",
"type": "bidirectional",
"description": "Port E GPIO (standard drive, Hi-Z after POR) that also serves as LLWU_P0 low-leakage wakeup input, with alternates ADC0_SE5a, SPI1_SOUT, UART1_RX, LPI2C1_SCL and SPI1_SIN."
},
{
"number": "3",
"name": "VDD",
"type": "power_in",
"description": "Digital supply pin; the datasheet operating requirement is 1.71 V to 3.6 V and VDD must not differ from VDDA by more than ±0.1 V."
},
{
"number": "4",
"name": "VSS",
"type": "power_in",
"description": "Digital ground pin; VSS to VSSA differential must stay within ±0.1 V."
},
{
"number": "5",
"name": "USB0_DP",
"type": "bidirectional",
"description": "USB full-speed 2.0 D+ analog data signal; USB is usable without an external crystal when IRC48M is enabled."
},
{
"number": "6",
"name": "USB0_DM",
"type": "bidirectional",
"description": "USB full-speed 2.0 D- analog data signal; leave floating if the USB module is not used."
},
{
"number": "7",
"name": "USBVDD",
"type": "power_in",
"description": "USB transceiver supply with a required range of 3.0 V to 3.6 V (nominal 3.3 V); tie to ground through 10 kΩ if USB is unused."
},
{
"number": "8",
"name": "ADC0_DP1",
"type": "passive",
"description": "ADC0 differential positive input pair 1; on the 64-LQFP package this channel is available only in single-ended (SE) mode."
},
{
"number": "9",
"name": "ADC0_DP0",
"type": "passive",
"description": "ADC0 differential analog input, positive side of pair 0 (paired with ADC0_DM0 on pin 10)."
},
{
"number": "10",
"name": "ADC0_DM0",
"type": "passive",
"description": "ADC0 differential analog input, negative side of pair 0 (paired with ADC0_DP0 on pin 9)."
},
{
"number": "11",
"name": "ADC0_DP3",
"type": "passive",
"description": "ADC0 differential analog input, positive side of pair 3 (paired with ADC0_DM3 on pin 12)."
},
{
"number": "12",
"name": "ADC0_DM3",
"type": "passive",
"description": "ADC0 differential analog input, negative side of pair 3 (paired with ADC0_DP3 on pin 11)."
},
{
"number": "13",
"name": "VDDA",
"type": "power_in",
"description": "Analog supply for the ADC, DAC and comparator; operating range 1.71 V to 3.6 V, and VDD-VDDA must stay within ±0.1 V."
},
{
"number": "14",
"name": "VREFH",
"type": "power_in",
"description": "ADC high reference voltage; must be between 1.13 V and VDDA."
},
{
"number": "15",
"name": "VREFL",
"type": "power_in",
"description": "ADC low reference voltage; must equal VSSA."
},
{
"number": "16",
"name": "VSSA",
"type": "power_in",
"description": "Analog ground for the ADC, DAC and comparator; VSS-VSSA must stay within ±0.1 V."
},
{
"number": "17",
"name": "CMP0_IN5",
"type": "passive",
"description": "Comparator 0 analog input channel 5; the comparator inputs support rail-to-rail operation."
},
{
"number": "18",
"name": "DAC0_OUT/ADC0_SE23",
"type": "passive",
"description": "12-bit DAC output that can be routed to this external pin or used as an input to the comparator or ADC (ADC0_SE23)."
},
{
"number": "19",
"name": "XTAL32",
"type": "output",
"description": "32.768 kHz RTC oscillator output; must be left floating when an external clock is applied to EXTAL32."
},
{
"number": "20",
"name": "EXTAL32",
"type": "input",
"description": "32.768 kHz RTC oscillator input; an externally supplied clock must be 700 mV peak-to-peak minimum up to VBAT."
},
{
"number": "21",
"name": "VBAT",
"type": "power_in",
"description": "RTC battery backup supply for the RTC and VBAT register file; operating range 1.71 V to 3.6 V."
},
{
"number": "22",
"name": "PTA0",
"type": "bidirectional",
"description": "Port A GPIO (default JTAG_TCLK/SWD_CLK debug clock, pull-down after POR) with alternates UART0_CTS_b, TPM0_CH5 and EWM_IN."
},
{
"number": "23",
"name": "PTA1",
"type": "bidirectional",
"description": "Port A GPIO (default JTAG_TDI, pull-up after POR) with alternates UART0_RX, CMP0_OUT, LPI2C1_HREQ and TPM1_CH1."
},
{
"number": "24",
"name": "PTA2",
"type": "bidirectional",
"description": "Port A GPIO (default JTAG_TDO/TRACE_SWO, pull-up after POR) with alternates UART0_TX and TPM1_CH0."
},
{
"number": "25",
"name": "PTA3",
"type": "bidirectional",
"description": "Port A GPIO (default JTAG_TMS/SWD_DIO, pull-up after POR) with alternates UART0_RTS_b, TPM0_CH0 and EWM_OUT_b."
},
{
"number": "26",
"name": "PTA4/LLWU_P3",
"type": "bidirectional",
"description": "Port A GPIO with LLWU_P3 wakeup input and default NMI_b function (pull-up after POR); NMI can be disabled with FOPT[NMI_DIS] and must not have pull-down or capacitor added."
},
{
"number": "27",
"name": "PTA5",
"type": "bidirectional",
"description": "Port A GPIO, disabled and high-impedance after POR, with alternates USB_CLKIN, TPM0_CH2, I2S0_TX_BCLK and JTAG_TRST_b."
},
{
"number": "28",
"name": "PTA12",
"type": "bidirectional",
"description": "Port A GPIO, disabled and high-impedance after POR, with alternates CAN0_TX, TPM1_CH0 and I2S0_TXD0."
},
{
"number": "29",
"name": "PTA13/LLWU_P4",
"type": "bidirectional",
"description": "Port A GPIO with LLWU_P4 wakeup input, disabled and high-impedance after POR, with alternates CAN0_RX, TPM1_CH1 and I2S0_TX_FS."
},
{
"number": "30",
"name": "VDD",
"type": "power_in",
"description": "Digital supply pin; operating range 1.71 V to 3.6 V."
},
{
"number": "31",
"name": "VSS",
"type": "power_in",
"description": "Digital ground pin."
},
{
"number": "32",
"name": "PTA18",
"type": "bidirectional",
"description": "Port A GPIO whose ALT0 function is the main oscillator EXTAL0 input (external clock/oscillator input), also usable as TPM_CLKIN0."
},
{
"number": "33",
"name": "PTA19",
"type": "bidirectional",
"description": "Port A GPIO whose ALT0 function is the main oscillator XTAL0 output, also usable as TPM_CLKIN1 and LPTMR0_ALT1."
},
{
"number": "34",
"name": "RESET_b",
"type": "bidirectional",
"description": "Active-low reset as a true open-drain I/O with internal pull-up; external pull-up of 4.7 kΩ to 10 kΩ and 0.1 µF capacitor are recommended."
},
{
"number": "35",
"name": "PTB0/LLWU_P5",
"type": "bidirectional",
"description": "Port B GPIO with high-drive capability (selectable via DSE), LLWU_P5 wakeup input, and alternates ADC0_SE8, LPI2C0_SCL, TPM1_CH0, FXIO0_D4 and UART0_RX."
},
{
"number": "36",
"name": "PTB1",
"type": "bidirectional",
"description": "Port B GPIO with high-drive capability (selectable via DSE), with alternates ADC0_SE9, LPI2C0_SDA, TPM1_CH1, EWM_IN, FXIO0_D5 and UART0_TX."
},
{
"number": "37",
"name": "PTB2",
"type": "bidirectional",
"description": "Port B GPIO (standard drive) with alternates ADC0_SE12, LPI2C0_SCL, UART0_RTS_b, FXIO0_D6 and CAN1_RX."
},
{
"number": "38",
"name": "PTB3",
"type": "bidirectional",
"description": "Port B GPIO (standard drive) with alternates ADC0_SE13, LPI2C0_SDA, UART0_CTS_b, FXIO0_D7 and CAN1_TX."
},
{
"number": "39",
"name": "PTB16",
"type": "bidirectional",
"description": "Port B GPIO (standard drive) with alternates SPI1_SOUT, UART0_RX, TPM_CLKIN0, EWM_IN and I2S1_TXD0."
},
{
"number": "40",
"name": "PTB17",
"type": "bidirectional",
"description": "Port B GPIO (standard drive) with alternates SPI1_SIN, UART0_TX, TPM_CLKIN1, EWM_OUT_b and FXIO0_D0."
},
{
"number": "41",
"name": "PTB18",
"type": "bidirectional",
"description": "Port B GPIO (standard drive) with alternates CAN0_TX, TPM2_CH0, I2S0_TX_BCLK and FXIO0_D1."
},
{
"number": "42",
"name": "PTB19",
"type": "bidirectional",
"description": "Port B GPIO (standard drive) with alternates CAN0_RX, TPM2_CH1, I2S0_TX_FS and FXIO0_D2."
},
{
"number": "43",
"name": "PTC0",
"type": "bidirectional",
"description": "Port C GPIO (standard drive) with alternates ADC0_SE14, SPI0_PCS4, PDB0_EXTRG, USB_SOF_OUT, FXIO0_D3 and SPI0_PCS0."
},
{
"number": "44",
"name": "PTC1/LLWU_P6",
"type": "bidirectional",
"description": "Port C GPIO (standard drive) with LLWU_P6 wakeup input and alternates ADC0_SE15, SPI0_PCS3, UART1_RTS_b, TPM0_CH0, I2S0_TXD0 and LPUART0_RTS_b."
},
{
"number": "45",
"name": "PTC2",
"type": "bidirectional",
"description": "Port C GPIO (standard drive) with alternates ADC0_SE4b, SPI0_PCS2, UART1_CTS_b, TPM0_CH1, I2S0_TX_FS and LPUART0_CTS_b."
},
{
"number": "46",
"name": "PTC3/LLWU_P7",
"type": "bidirectional",
"description": "Port C GPIO with high-drive capability (selectable via DSE), LLWU_P7 wakeup input, and alternates SPI0_PCS1, UART1_RX, TPM0_CH2, CLKOUT, I2S0_TX_BCLK and LPUART0_RX."
},
{
"number": "47",
"name": "VSS",
"type": "power_in",
"description": "Digital ground pin."
},
{
"number": "48",
"name": "VDD",
"type": "power_in",
"description": "Digital supply pin; operating range 1.71 V to 3.6 V."
},
{
"number": "49",
"name": "PTC4/LLWU_P8",
"type": "bidirectional",
"description": "Port C GPIO with high-drive capability (selectable via DSE), LLWU_P8 wakeup input, and alternates SPI0_PCS0, UART1_TX, TPM0_CH3, LPI2C0_HREQ and LPUART0_TX."
},
{
"number": "50",
"name": "PTC5/LLWU_P9",
"type": "bidirectional",
"description": "Port C GPIO (standard drive) with LLWU_P9 wakeup input and alternates SPI0_SCK, LPTMR0_ALT2, I2S0_RXD0, CMP0_OUT and TPM0_CH2."
},
{
"number": "51",
"name": "PTC6/LLWU_P10",
"type": "bidirectional",
"description": "Port C GPIO (standard drive) with LLWU_P10 wakeup input and alternates CMP0_IN0, SPI0_SOUT, PDB0_EXTRG, I2S0_RX_BCLK, I2S0_MCLK and LPI2C0_SCL."
},
{
"number": "52",
"name": "PTC7",
"type": "bidirectional",
"description": "Port C GPIO (standard drive) with alternates CMP0_IN1, SPI0_SIN, USB_SOF_OUT, I2S0_RX_FS and LPI2C0_SDA."
},
{
"number": "53",
"name": "PTC8",
"type": "bidirectional",
"description": "Port C GPIO (standard drive) with alternates CMP0_IN2, LPI2C0_SCLS, I2S0_MCLK, FXIO0_D0 and I2S1_RXD0."
},
{
"number": "54",
"name": "PTC9",
"type": "bidirectional",
"description": "Port C GPIO (standard drive) with alternates CMP0_IN3, LPI2C0_SDAS, I2S0_RX_BCLK, FXIO0_D1 and I2S1_RX_BCLK."
},
{
"number": "55",
"name": "PTC10",
"type": "bidirectional",
"description": "Port C GPIO (standard drive) with alternates LPI2C1_SCL, I2S0_RX_FS, FXIO0_D2 and I2S1_RX_FS."
},
{
"number": "56",
"name": "PTC11/LLWU_P11",
"type": "bidirectional",
"description": "Port C GPIO (standard drive) with LLWU_P11 wakeup input and alternates LPI2C1_SDA, FXIO0_D3 and I2S1_MCLK."
},
{
"number": "57",
"name": "PTD0/LLWU_P12",
"type": "bidirectional",
"description": "Port D GPIO (standard drive) with LLWU_P12 wakeup input and alternates SPI0_PCS0, UART2_RTS_b, LPUART0_RTS_b and FXIO0_D6."
},
{
"number": "58",
"name": "PTD1",
"type": "bidirectional",
"description": "Port D GPIO (standard drive) with alternates ADC0_SE5b, SPI0_SCK, UART2_CTS_b, LPUART0_CTS_b and FXIO0_D7."
},
{
"number": "59",
"name": "PTD2/LLWU_P13",
"type": "bidirectional",
"description": "Port D GPIO (standard drive) with LLWU_P13 wakeup input and alternates SPI0_SOUT, UART2_RX, LPUART0_RX and LPI2C0_SCL."
},
{
"number": "60",
"name": "PTD3",
"type": "bidirectional",
"description": "Port D GPIO (standard drive) with alternates SPI0_SIN, UART2_TX, LPUART0_TX and LPI2C0_SDA."
},
{
"number": "61",
"name": "PTD4/LLWU_P14",
"type": "bidirectional",
"description": "Port D GPIO with high-drive capability (selectable via DSE), LLWU_P14 wakeup input, and alternates SPI0_PCS1, UART0_RTS_b, TPM0_CH4, EWM_IN and SPI1_PCS0."
},
{
"number": "62",
"name": "PTD5",
"type": "bidirectional",
"description": "Port D GPIO with high-drive capability (selectable via DSE), with alternates ADC0_SE6b, SPI0_PCS2, UART0_CTS_b, TPM0_CH5, EWM_OUT_b and SPI1_SCK."
},
{
"number": "63",
"name": "PTD6/LLWU_P15",
"type": "bidirectional",
"description": "Port D GPIO with high-drive capability (selectable via DSE), LLWU_P15 wakeup input, and alternates ADC0_SE7b, SPI0_PCS3, UART0_RX and SPI1_SOUT."
},
{
"number": "64",
"name": "PTD7",
"type": "bidirectional",
"description": "Port D GPIO with high-drive capability (selectable via DSE), with alternates UART0_TX and SPI1_SIN."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The datasheet places the note '(Note: 100LQFP only)' in the PTB16 row. It is unclear whether this ap; Ordering-table footnote 3 says ADC0_DP1 is available only in single-ended (SE) mode on the 64-LQFP p; PTA18 and PTA19 have a reset default of EXTAL0/XTAL0 in the signal table, with the PTA name as the G"
],
"pages_sent": 77,
"cost_usd": 0.3787,
"at": "2026-10-30T22:01:25"
},
"datasheet": {
"url": "https://www.nxp.com/docs/en/data-sheet/MKS22FN256VLH12.pdf",
"pages": 108,
"sha256": "dd02f2252bc40194",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 64,
"described": 64,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "mks22fn256vlh12.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
12,
12,
1.5
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "b0c827bc5c05552175d28affe44a5bd2ab45c9c36efff6ff07a74cc449b13db4",
"checked": "2026-10-30",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "mks22fn256vlh12-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
12,
12,
1.5
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "489f16634fbacb8af9b10f3c1d7e4125a5c5791ee026c4caac0477c7839af2c5",
"checked": "2026-10-30",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "NXP Semicon",
"Package": "LQFP-64(10x10)",
"Category": "Embedded Processors & Controllers",
"Pins": "64"
},
"characteristics": {
"version": 1,
"source": "datasheet",
"datasheet_sha256": "dd02f2252bc4019462a678b79a029f5043ab08a2972f9f32a56714a350160b1c",
"rows": [
{
"name": "Digital supply voltage",
"symbol": "VDD",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 3.8,
"conditions": "",
"source_page": 54,
"source": "datasheet"
},
{
"name": "Digital supply current",
"symbol": "IDD",
"kind": "absolute_maximum",
"unit": "mA",
"min": null,
"typ": null,
"max": 120,
"conditions": "",
"source_page": 54,
"source": "datasheet"
},
{
"name": "Single pin transient maximum current limit (all port pins)",
"symbol": "ID",
"kind": "absolute_maximum",
"unit": "mA",
"min": -25,
"typ": null,
"max": 25,
"conditions": "single pin transient max current limit, all port pins",
"source_page": 54,
"source": "datasheet"
},
{
"name": "USB_DP input voltage",
"symbol": "VUSB_DP",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 3.63,
"conditions": "",
"source_page": 55,
"source": "datasheet"
},
{
"name": "USB_DM input voltage",
"symbol": "VUSB_DM",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 3.63,
"conditions": "",
"source_page": 55,
"source": "datasheet"
},
{
"name": "RTC battery supply voltage",
"symbol": "VBAT",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 3.8,
"conditions": "",
"source_page": 55,
"source": "datasheet"
},
{
"name": "Storage temperature",
"symbol": "TSTG",
"kind": "absolute_maximum",
"unit": "°C",
"min": -55,
"typ": null,
"max": 150,
"conditions": "per JEDEC JESD22-A103 high-temperature storage",
"source_page": 54,
"source": "datasheet"
},
{
"name": "Lead-free soldering temperature",
"symbol": "TSDR",
"kind": "absolute_maximum",
"unit": "°C",
"min": null,
"typ": null,
"max": 260,
"conditions": "per IPC/JEDEC J-STD-020",
"source_page": 54,
"source": "datasheet"
},
{
"name": "ESD voltage, human body model",
"symbol": "VHBM",
"kind": "absolute_maximum",
"unit": "V",
"min": -2000,
"typ": null,
"max": 2000,
"conditions": "per JEDEC JESD22-A114 HBM",
"source_page": 54,
"source": "datasheet"
},
{
"name": "ESD voltage, charged device model",
"symbol": "VCDM",
"kind": "absolute_maximum",
"unit": "V",
"min": -500,
"typ": null,
"max": 500,
"conditions": "per JEDEC JESD22-C101 CDM",
"source_page": 54,
"source": "datasheet"
},
{
"name": "Latch-up current",
"symbol": "ILAT",
"kind": "absolute_maximum",
"unit": "mA",
"min": -100,
"typ": null,
"max": 100,
"conditions": "105°C ambient temperature, per JEDEC JESD78",
"source_page": 54,
"source": "datasheet"
},
{
"name": "Supply voltage VDD",
"symbol": "VDD",
"kind": "recommended_operating",
"unit": "V",
"min": 1.71,
"typ": null,
"max": 3.6,
"conditions": "",
"source_page": 55,
"source": "datasheet"
},
{
"name": "Analog supply voltage",
"symbol": "VDDA",
"kind": "recommended_operating",
"unit": "V",
"min": 1.71,
"typ": null,
"max": 3.6,
"conditions": "",
"source_page": 55,
"source": "datasheet"
},
{
"name": "VDD to VDDA differential voltage",
"symbol": "VDD – VDDA",
"kind": "recommended_operating",
"unit": "V",
"min": -0.1,
"typ": null,
"max": 0.1,
"conditions": "",
"source_page": 56,
"source": "datasheet"
},
{
"name": "VSS to VSSA differential voltage",
"symbol": "VSS – VSSA",
"kind": "recommended_operating",
"unit": "V",
"min": -0.1,
"typ": null,
"max": 0.1,
"conditions": "",
"source_page": 56,
"source": "datasheet"
},
{
"name": "RTC battery supply voltage",
"symbol": "VBAT",
"kind": "recommended_operating",
"unit": "V",
"min": 1.71,
"typ": null,
"max": 3.6,
"conditions": "",
"source_page": 56,
"source": "datasheet"
},
{
"name": "USB transceiver supply voltage",
"symbol": "USBVDD",
"kind": "recommended_operating",
"unit": "V",
"min": 3,
"typ": null,
"max": 3.6,
"conditions": "nominal operating voltage 3.3 V",
"source_page": 56,
"source": "datasheet"
},
{
"name": "Analog and I/O pin DC injection current, single pin",
"symbol": "IICIO",
"kind": "recommended_operating",
"unit": "mA",
"min": -3,
"typ": null,
"max": null,
"conditions": "VIN < VSS-0.3V (negative injection)",
"source_page": 56,
"source": "datasheet"
},
{
"name": "Continuous pin DC injection current, region limit",
"symbol": "IICcont",
"kind": "recommended_operating",
"unit": "mA",
"min": -25,
"typ": null,
"max": null,
"conditions": "negative injection; sum over 16 consecutive pins",
"source_page": 56,
"source": "datasheet"
},
{
"name": "VDD voltage to retain RAM data",
"symbol": "VRAM",
"kind": "recommended_operating",
"unit": "V",
"min": 1.2,
"typ": null,
"max": null,
"conditions": "",
"source_page": 56,
"source": "datasheet"
},
{
"name": "Die junction temperature",
"symbol": "TJ",
"kind": "recommended_operating",
"unit": "°C",
"min": -40,
"typ": null,
"max": 125,
"conditions": "",
"source_page": 68,
"source": "datasheet"
},
{
"name": "Ambient temperature",
"symbol": "TA",
"kind": "recommended_operating",
"unit": "°C",
"min": -40,
"typ": null,
"max": 105,
"conditions": "may exceed max only if TJ max is ensured",
"source_page": 68,
"source": "datasheet"
},
{
"name": "POR detect voltage, VDD falling",
"symbol": "VPOR",
"kind": "electrical",
"unit": "V",
"min": 0.8,
"typ": 1.1,
"max": 1.5,
"conditions": "VDD supply falling",
"source_page": 56,
"source": "datasheet"
},
{
"name": "High-voltage detect low trip point",
"symbol": "VLVDH",
"kind": "electrical",
"unit": "V",
"min": 2.48,
"typ": 2.56,
"max": 2.64,
"conditions": "low-voltage detect, high range (LVDV=01)",
"source_page": 56,
"source": "datasheet"
},
{
"name": "Low-voltage warning threshold, level 1, high range",
"symbol": "VLVW1H",
"kind": "electrical",
"unit": "V",
"min": 2.62,
"typ": 2.7,
"max": 2.78,
"conditions": "high range, 1-level drop (LVWV=00)",
"source_page": 56,
"source": "datasheet"
},
{
"name": "Low-voltage warning threshold, level 3/4, high range",
"symbol": "VLVW4H",
"kind": "electrical",
"unit": "V",
"min": 2.92,
"typ": 3,
"max": 3.08,
"conditions": "high range, 3-level drop (LVWV=10) and 4-level drop (LVWV=11)",
"source_page": 57,
"source": "datasheet"
},
{
"name": "Low-voltage detect threshold, low range",
"symbol": "VLVDL",
"kind": "electrical",
"unit": "V",
"min": 1.54,
"typ": 1.6,
"max": 1.66,
"conditions": "low range (LVDV=00)",
"source_page": 57,
"source": "datasheet"
},
{
"name": "Low-voltage warning threshold, level 1, low range",
"symbol": "VLVW1L",
"kind": "electrical",
"unit": "V",
"min": 1.74,
"typ": 1.8,
"max": 1.86,
"conditions": "low range, 1-level drop (LVWV=00)",
"source_page": 57,
"source": "datasheet"
},
{
"name": "Low-voltage warning threshold, level 4, low range",
"symbol": "VLVW4L",
"kind": "electrical",
"unit": "V",
"min": 2.04,
"typ": 2.1,
"max": 2.16,
"conditions": "low range, 4-level drop (LVWV=11)",
"source_page": 57,
"source": "datasheet"
},
{
"name": "Bandgap voltage reference",
"symbol": "VBG",
"kind": "electrical",
"unit": "V",
"min": 0.97,
"typ": 1,
"max": 1.03,
"conditions": "",
"source_page": 57,
"source": "datasheet"
},
{
"name": "Internal low-power oscillator period",
"symbol": "tLPO",
"kind": "electrical",
"unit": "μs",
"min": 900,
"typ": 1000,
"max": 1100,
"conditions": "factory-trimmed",
"source_page": 57,
"source": "datasheet"
},
{
"name": "VBAT POR detect voltage, VBAT falling",
"symbol": "VPOR_VBAT",
"kind": "electrical",
"unit": "V",
"min": 0.8,
"typ": 1.1,
"max": 1.5,
"conditions": "VBAT supply falling",
"source_page": 57,
"source": "datasheet"
},
{
"name": "Output low voltage, general-purpose drive pins",
"symbol": "VOL",
"kind": "electrical",
"unit": "V",
"min": null,
"typ": null,
"max": 0.5,
"conditions": "excl. RESET_B; 2.7 V ≤ VDD ≤ 3.6 V, IOL = 5 mA",
"source_page": 57,
"source": "datasheet"
},
{
"name": "Output low voltage, high drive pins",
"symbol": "VOL",
"kind": "electrical",
"unit": "V",
"min": null,
"typ": null,
"max": 0.5,
"conditions": "excl. RESET_B; 2.7 V ≤ VDD ≤ 3.6 V, IOL = 20 mA",
"source_page": 57,
"source": "datasheet"
},
{
"name": "Output low voltage, RESET_B",
"symbol": "VOL",
"kind": "electrical",
"unit": "V",
"min": null,
"typ": null,
"max": 0.5,
"conditions": "2.7 V ≤ VDD ≤ 3.6 V, IOL = 3 mA",
"source_page": 58,
"source": "datasheet"
},
{
"name": "Total output high current, all ports",
"symbol": "IOHT",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": null,
"max": 100,
"conditions": "",
"source_page": 57,
"source": "datasheet"
},
{
"name": "Total output low current, all ports",
"symbol": "IOLT",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": null,
"max": 100,
"conditions": "",
"source_page": 58,
"source": "datasheet"
},
{
"name": "Input leakage current per pin",
"symbol": "IIN",
"kind": "electrical",
"unit": "μA",
"min": null,
"typ": 0.002,
"max": 0.5,
"conditions": "full temperature range; all pins except high-drive pins",
"source_page": 58,
"source": "datasheet"
},
{
"name": "Input leakage current, total of all pins",
"symbol": "IIN",
"kind": "electrical",
"unit": "μA",
"min": null,
"typ": null,
"max": 1,
"conditions": "full temperature range",
"source_page": 58,
"source": "datasheet"
},
{
"name": "Internal pull-up resistor",
"symbol": "RPU",
"kind": "electrical",
"unit": "kΩ",
"min": 20,
"typ": null,
"max": 50,
"conditions": "",
"source_page": 58,
"source": "datasheet"
},
{
"name": "Internal pull-down resistor",
"symbol": "RPD",
"kind": "electrical",
"unit": "kΩ",
"min": 20,
"typ": null,
"max": 50,
"conditions": "",
"source_page": 58,
"source": "datasheet"
},
{
"name": "Analog pin input capacitance",
"symbol": "CIN_A",
"kind": "electrical",
"unit": "pF",
"min": null,
"typ": null,
"max": 7,
"conditions": "",
"source_page": 66,
"source": "datasheet"
},
{
"name": "Digital pin input capacitance",
"symbol": "CIN_D",
"kind": "electrical",
"unit": "pF",
"min": null,
"typ": null,
"max": 7,
"conditions": "",
"source_page": 66,
"source": "datasheet"
},
{
"name": "System and core clock, HSRUN mode",
"symbol": "fSYS",
"kind": "timing",
"unit": "MHz",
"min": null,
"typ": null,
"max": 120,
"conditions": "HSRUN mode",
"source_page": 66,
"source": "datasheet"
},
{
"name": "System and core clock, normal run mode",
"symbol": "fSYS",
"kind": "timing",
"unit": "MHz",
"min": null,
"typ": null,
"max": 80,
"conditions": "normal operating mode",
"source_page": 66,
"source": "datasheet"
},
{
"name": "RUN mode current, flash code, peripheral clocks disabled, 3.0 V",
"symbol": "IDD_RUN",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 13.87,
"max": 15.158,
"conditions": "@ 3.0 V @25°C; all peripheral clocks disabled; execute from flash",
"source_page": 60,
"source": "datasheet"
},
{
"name": "RUN mode current, flash code, peripheral clocks enabled, 3.0 V",
"symbol": "IDD_RUN",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 18.08,
"max": 20.145,
"conditions": "@ 3.0 V @25°C; all peripheral clocks enabled; execute from flash",
"source_page": 60,
"source": "datasheet"
},
{
"name": "STOP mode current, 3.0 V",
"symbol": "IDD_STOP",
"kind": "electrical",
"unit": "μA",
"min": null,
"typ": 269.63,
"max": 292.223,
"conditions": "@ 3.0 V @25°C",
"source_page": 61,
"source": "datasheet"
},
{
"name": "External oscillator frequency, high frequency high range",
"symbol": "fosc_hi_2",
"kind": "electrical",
"unit": "MHz",
"min": 8,
"typ": null,
"max": 32,
"conditions": "MCG_C2[RANGE]=1x",
"source_page": 77,
"source": "datasheet"
},
{
"name": "ADC supply voltage VDDA",
"symbol": "VDDA",
"kind": "recommended_operating",
"unit": "V",
"min": 1.71,
"typ": null,
"max": 3.6,
"conditions": "absolute value",
"source_page": 80,
"source": "datasheet"
},
{
"name": "Thermal resistance, junction to ambient, natural convection, single layer (1S)",
"symbol": "RθJA",
"kind": "thermal",
"unit": "°C/W",
"min": null,
"typ": 61,
"max": null,
"conditions": "64 LQFP column; JEDEC JESD51-2, natural convection, 1S board",
"source_page": 68,
"source": "datasheet"
},
{
"name": "Thermal resistance, junction to ambient, natural convection, four layer (2s2p)",
"symbol": "RθJA",
"kind": "thermal",
"unit": "°C/W",
"min": null,
"typ": 43,
"max": null,
"conditions": "64 LQFP column; JEDEC JESD51-2, natural convection, 2s2p board",
"source_page": 68,
"source": "datasheet"
},
{
"name": "Thermal resistance, junction to ambient, 200 ft/min airflow, single layer (1S)",
"symbol": "RθJMA",
"kind": "thermal",
"unit": "°C/W",
"min": null,
"typ": 49,
"max": null,
"conditions": "64 LQFP column; 200 ft/min forced convection, 1S board",
"source_page": 68,
"source": "datasheet"
},
{
"name": "Thermal resistance, junction to board",
"symbol": "RθJB",
"kind": "thermal",
"unit": "°C/W",
"min": null,
"typ": 25,
"max": null,
"conditions": "64 LQFP column; JEDEC JESD51-8",
"source_page": 68,
"source": "datasheet"
},
{
"name": "Thermal resistance, junction to case",
"symbol": "RθJC",
"kind": "thermal",
"unit": "°C/W",
"min": null,
"typ": 13,
"max": null,
"conditions": "64 LQFP column; MIL SPEC-883 Method 1012.1",
"source_page": 68,
"source": "datasheet"
},
{
"name": "Thermal characterization parameter, junction to package top",
"symbol": "ΨJT",
"kind": "thermal",
"unit": "°C/W",
"min": null,
"typ": 2,
"max": null,
"conditions": "64 LQFP column; natural convection, JEDEC JESD51-2",
"source_page": 68,
"source": "datasheet"
}
]
}
},
"variants": [],
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"mks22fn256vlh12"
],
"discovery_pitch": "MKS22FN256VLH12 (NXP Semicon) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"mks22fn256vlh12.kicad_sym",
"mks22fn256vlh12.kicad_mod",
"mks22fn256vlh12.glb",
"mks22fn256vlh12.step",
"mks22fn256vlh12.lbr",
"docs/hero.png",
"docs/mks22fn256vlh12-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"mks22fn256vlh12-hero.glb",
"mks22fn256vlh12-hero.overlay.json",
"mks22fn256vlh12-etched.glb",
"mks22fn256vlh12-etched.step"
],
"visibility": "public",
"description": "NXP Semicon Pre-ordered MCUs, LQFP-64(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"org": "adom"
}