Generated by kicad-footprint-generator · KiCad file format 20260206
MKS22FN256VLH12
NXP Semicon · Pre-ordered MCUs · LQFP-64(10x10)
MKS22FN256VLH12 from NXP Semicon, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PTE0/CLKOUT32K | bidirectional | Port E GPIO (standard drive, Hi-Z after POR) with alternate functions ADC0_SE4a, SPI1_PCS1, UART1_TX, LPI2C1_SDA and RTC_CLKOUT (32 kHz clock output). |
| 2 | PTE1/LLWU_P0 | bidirectional | Port E GPIO (standard drive, Hi-Z after POR) that also serves as LLWU_P0 low-leakage wakeup input, with alternates ADC0_SE5a, SPI1_SOUT, UART1_RX, LPI2C1_SCL and SPI1_SIN. |
| 3 | VDD | power_in | Digital supply pin; the datasheet operating requirement is 1.71 V to 3.6 V and VDD must not differ from VDDA by more than ±0.1 V. |
| 4 | VSS | power_in | Digital ground pin; VSS to VSSA differential must stay within ±0.1 V. |
| 5 | USB0_DP | bidirectional | USB full-speed 2.0 D+ analog data signal; USB is usable without an external crystal when IRC48M is enabled. |
| 6 | USB0_DM | bidirectional | USB full-speed 2.0 D- analog data signal; leave floating if the USB module is not used. |
| 7 | USBVDD | power_in | USB transceiver supply with a required range of 3.0 V to 3.6 V (nominal 3.3 V); tie to ground through 10 kΩ if USB is unused. |
| 8 | ADC0_DP1 | passive | ADC0 differential positive input pair 1; on the 64-LQFP package this channel is available only in single-ended (SE) mode. |
| 9 | ADC0_DP0 | passive | ADC0 differential analog input, positive side of pair 0 (paired with ADC0_DM0 on pin 10). |
| 10 | ADC0_DM0 | passive | ADC0 differential analog input, negative side of pair 0 (paired with ADC0_DP0 on pin 9). |
| 11 | ADC0_DP3 | passive | ADC0 differential analog input, positive side of pair 3 (paired with ADC0_DM3 on pin 12). |
| 12 | ADC0_DM3 | passive | ADC0 differential analog input, negative side of pair 3 (paired with ADC0_DP3 on pin 11). |
| 13 | VDDA | power_in | Analog supply for the ADC, DAC and comparator; operating range 1.71 V to 3.6 V, and VDD-VDDA must stay within ±0.1 V. |
| 14 | VREFH | power_in | ADC high reference voltage; must be between 1.13 V and VDDA. |
| 15 | VREFL | power_in | ADC low reference voltage; must equal VSSA. |
| 16 | VSSA | power_in | Analog ground for the ADC, DAC and comparator; VSS-VSSA must stay within ±0.1 V. |
| 17 | CMP0_IN5 | passive | Comparator 0 analog input channel 5; the comparator inputs support rail-to-rail operation. |
| 18 | DAC0_OUT/ADC0_SE23 | passive | 12-bit DAC output that can be routed to this external pin or used as an input to the comparator or ADC (ADC0_SE23). |
| 19 | XTAL32 | output | 32.768 kHz RTC oscillator output; must be left floating when an external clock is applied to EXTAL32. |
| 20 | EXTAL32 | input | 32.768 kHz RTC oscillator input; an externally supplied clock must be 700 mV peak-to-peak minimum up to VBAT. |
| 21 | VBAT | power_in | RTC battery backup supply for the RTC and VBAT register file; operating range 1.71 V to 3.6 V. |
| 22 | PTA0 | bidirectional | Port A GPIO (default JTAG_TCLK/SWD_CLK debug clock, pull-down after POR) with alternates UART0_CTS_b, TPM0_CH5 and EWM_IN. |
| 23 | PTA1 | bidirectional | Port A GPIO (default JTAG_TDI, pull-up after POR) with alternates UART0_RX, CMP0_OUT, LPI2C1_HREQ and TPM1_CH1. |
| 24 | PTA2 | bidirectional | Port A GPIO (default JTAG_TDO/TRACE_SWO, pull-up after POR) with alternates UART0_TX and TPM1_CH0. |
| 25 | PTA3 | bidirectional | Port A GPIO (default JTAG_TMS/SWD_DIO, pull-up after POR) with alternates UART0_RTS_b, TPM0_CH0 and EWM_OUT_b. |
| 26 | PTA4/LLWU_P3 | bidirectional | Port A GPIO with LLWU_P3 wakeup input and default NMI_b function (pull-up after POR); NMI can be disabled with FOPT[NMI_DIS] and must not have pull-down or capacitor added. |
| 27 | PTA5 | bidirectional | Port A GPIO, disabled and high-impedance after POR, with alternates USB_CLKIN, TPM0_CH2, I2S0_TX_BCLK and JTAG_TRST_b. |
| 28 | PTA12 | bidirectional | Port A GPIO, disabled and high-impedance after POR, with alternates CAN0_TX, TPM1_CH0 and I2S0_TXD0. |
| 29 | PTA13/LLWU_P4 | bidirectional | Port A GPIO with LLWU_P4 wakeup input, disabled and high-impedance after POR, with alternates CAN0_RX, TPM1_CH1 and I2S0_TX_FS. |
| 30 | VDD | power_in | Digital supply pin; operating range 1.71 V to 3.6 V. |
| 31 | VSS | power_in | Digital ground pin. |
| 32 | PTA18 | bidirectional | Port A GPIO whose ALT0 function is the main oscillator EXTAL0 input (external clock/oscillator input), also usable as TPM_CLKIN0. |
| 33 | PTA19 | bidirectional | Port A GPIO whose ALT0 function is the main oscillator XTAL0 output, also usable as TPM_CLKIN1 and LPTMR0_ALT1. |
| 34 | RESET_b | bidirectional | Active-low reset as a true open-drain I/O with internal pull-up; external pull-up of 4.7 kΩ to 10 kΩ and 0.1 µF capacitor are recommended. |
| 35 | PTB0/LLWU_P5 | bidirectional | Port B GPIO with high-drive capability (selectable via DSE), LLWU_P5 wakeup input, and alternates ADC0_SE8, LPI2C0_SCL, TPM1_CH0, FXIO0_D4 and UART0_RX. |
| 36 | PTB1 | bidirectional | Port B GPIO with high-drive capability (selectable via DSE), with alternates ADC0_SE9, LPI2C0_SDA, TPM1_CH1, EWM_IN, FXIO0_D5 and UART0_TX. |
| 37 | PTB2 | bidirectional | Port B GPIO (standard drive) with alternates ADC0_SE12, LPI2C0_SCL, UART0_RTS_b, FXIO0_D6 and CAN1_RX. |
| 38 | PTB3 | bidirectional | Port B GPIO (standard drive) with alternates ADC0_SE13, LPI2C0_SDA, UART0_CTS_b, FXIO0_D7 and CAN1_TX. |
| 39 | PTB16 | bidirectional | Port B GPIO (standard drive) with alternates SPI1_SOUT, UART0_RX, TPM_CLKIN0, EWM_IN and I2S1_TXD0. |
| 40 | PTB17 | bidirectional | Port B GPIO (standard drive) with alternates SPI1_SIN, UART0_TX, TPM_CLKIN1, EWM_OUT_b and FXIO0_D0. |
| 41 | PTB18 | bidirectional | Port B GPIO (standard drive) with alternates CAN0_TX, TPM2_CH0, I2S0_TX_BCLK and FXIO0_D1. |
| 42 | PTB19 | bidirectional | Port B GPIO (standard drive) with alternates CAN0_RX, TPM2_CH1, I2S0_TX_FS and FXIO0_D2. |
| 43 | PTC0 | bidirectional | Port C GPIO (standard drive) with alternates ADC0_SE14, SPI0_PCS4, PDB0_EXTRG, USB_SOF_OUT, FXIO0_D3 and SPI0_PCS0. |
| 44 | PTC1/LLWU_P6 | bidirectional | Port C GPIO (standard drive) with LLWU_P6 wakeup input and alternates ADC0_SE15, SPI0_PCS3, UART1_RTS_b, TPM0_CH0, I2S0_TXD0 and LPUART0_RTS_b. |
| 45 | PTC2 | bidirectional | Port C GPIO (standard drive) with alternates ADC0_SE4b, SPI0_PCS2, UART1_CTS_b, TPM0_CH1, I2S0_TX_FS and LPUART0_CTS_b. |
| 46 | PTC3/LLWU_P7 | bidirectional | Port C GPIO with high-drive capability (selectable via DSE), LLWU_P7 wakeup input, and alternates SPI0_PCS1, UART1_RX, TPM0_CH2, CLKOUT, I2S0_TX_BCLK and LPUART0_RX. |
| 47 | VSS | power_in | Digital ground pin. |
| 48 | VDD | power_in | Digital supply pin; operating range 1.71 V to 3.6 V. |
| 49 | PTC4/LLWU_P8 | bidirectional | Port C GPIO with high-drive capability (selectable via DSE), LLWU_P8 wakeup input, and alternates SPI0_PCS0, UART1_TX, TPM0_CH3, LPI2C0_HREQ and LPUART0_TX. |
| 50 | PTC5/LLWU_P9 | bidirectional | Port C GPIO (standard drive) with LLWU_P9 wakeup input and alternates SPI0_SCK, LPTMR0_ALT2, I2S0_RXD0, CMP0_OUT and TPM0_CH2. |
| 51 | PTC6/LLWU_P10 | bidirectional | Port C GPIO (standard drive) with LLWU_P10 wakeup input and alternates CMP0_IN0, SPI0_SOUT, PDB0_EXTRG, I2S0_RX_BCLK, I2S0_MCLK and LPI2C0_SCL. |
| 52 | PTC7 | bidirectional | Port C GPIO (standard drive) with alternates CMP0_IN1, SPI0_SIN, USB_SOF_OUT, I2S0_RX_FS and LPI2C0_SDA. |
| 53 | PTC8 | bidirectional | Port C GPIO (standard drive) with alternates CMP0_IN2, LPI2C0_SCLS, I2S0_MCLK, FXIO0_D0 and I2S1_RXD0. |
| 54 | PTC9 | bidirectional | Port C GPIO (standard drive) with alternates CMP0_IN3, LPI2C0_SDAS, I2S0_RX_BCLK, FXIO0_D1 and I2S1_RX_BCLK. |
| 55 | PTC10 | bidirectional | Port C GPIO (standard drive) with alternates LPI2C1_SCL, I2S0_RX_FS, FXIO0_D2 and I2S1_RX_FS. |
| 56 | PTC11/LLWU_P11 | bidirectional | Port C GPIO (standard drive) with LLWU_P11 wakeup input and alternates LPI2C1_SDA, FXIO0_D3 and I2S1_MCLK. |
| 57 | PTD0/LLWU_P12 | bidirectional | Port D GPIO (standard drive) with LLWU_P12 wakeup input and alternates SPI0_PCS0, UART2_RTS_b, LPUART0_RTS_b and FXIO0_D6. |
| 58 | PTD1 | bidirectional | Port D GPIO (standard drive) with alternates ADC0_SE5b, SPI0_SCK, UART2_CTS_b, LPUART0_CTS_b and FXIO0_D7. |
| 59 | PTD2/LLWU_P13 | bidirectional | Port D GPIO (standard drive) with LLWU_P13 wakeup input and alternates SPI0_SOUT, UART2_RX, LPUART0_RX and LPI2C0_SCL. |
| 60 | PTD3 | bidirectional | Port D GPIO (standard drive) with alternates SPI0_SIN, UART2_TX, LPUART0_TX and LPI2C0_SDA. |
| 61 | PTD4/LLWU_P14 | bidirectional | Port D GPIO with high-drive capability (selectable via DSE), LLWU_P14 wakeup input, and alternates SPI0_PCS1, UART0_RTS_b, TPM0_CH4, EWM_IN and SPI1_PCS0. |
| 62 | PTD5 | bidirectional | Port D GPIO with high-drive capability (selectable via DSE), with alternates ADC0_SE6b, SPI0_PCS2, UART0_CTS_b, TPM0_CH5, EWM_OUT_b and SPI1_SCK. |
| 63 | PTD6/LLWU_P15 | bidirectional | Port D GPIO with high-drive capability (selectable via DSE), LLWU_P15 wakeup input, and alternates ADC0_SE7b, SPI0_PCS3, UART0_RX and SPI1_SOUT. |
| 64 | PTD7 | bidirectional | Port D GPIO with high-drive capability (selectable via DSE), with alternates UART0_TX and SPI1_SIN. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | LQFP-64(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Digital supply voltage | VDD | -0.3 | 3.8 | V | 54 | ||
| Digital supply current | IDD | 120 | mA | 54 | |||
| Single pin transient maximum current limit (all port pins) | ID | -25 | 25 | mA | single pin transient max current limit, all port pins | 54 | |
| USB_DP input voltage | VUSB_DP | -0.3 | 3.63 | V | 55 | ||
| USB_DM input voltage | VUSB_DM | -0.3 | 3.63 | V | 55 | ||
| RTC battery supply voltage | VBAT | -0.3 | 3.8 | V | 55 | ||
| Storage temperature | TSTG | -55 | 150 | °C | per JEDEC JESD22-A103 high-temperature storage | 54 | |
| Lead-free soldering temperature | TSDR | 260 | °C | per IPC/JEDEC J-STD-020 | 54 | ||
| ESD voltage, human body model | VHBM | -2000 | 2000 | V | per JEDEC JESD22-A114 HBM | 54 | |
| ESD voltage, charged device model | VCDM | -500 | 500 | V | per JEDEC JESD22-C101 CDM | 54 | |
| Latch-up current | ILAT | -100 | 100 | mA | 105°C ambient temperature, per JEDEC JESD78 | 54 | |
| Supply voltage VDD | VDD | 1.71 | 3.6 | V | 55 | ||
| Analog supply voltage | VDDA | 1.71 | 3.6 | V | 55 | ||
| VDD to VDDA differential voltage | VDD, VDDA | -0.1 | 0.1 | V | 56 | ||
| VSS to VSSA differential voltage | VSS, VSSA | -0.1 | 0.1 | V | 56 | ||
| RTC battery supply voltage | VBAT | 1.71 | 3.6 | V | 56 | ||
| USB transceiver supply voltage | USBVDD | 3 | 3.6 | V | nominal operating voltage 3.3 V | 56 | |
| Analog and I/O pin DC injection current, single pin | IICIO | -3 | mA | VIN < VSS-0.3V (negative injection) | 56 | ||
| Continuous pin DC injection current, region limit | IICcont | -25 | mA | negative injection; sum over 16 consecutive pins | 56 | ||
| VDD voltage to retain RAM data | VRAM | 1.2 | V | 56 | |||
| Die junction temperature | TJ | -40 | 125 | °C | 68 | ||
| Ambient temperature | TA | -40 | 105 | °C | may exceed max only if TJ max is ensured | 68 | |
| POR detect voltage, VDD falling | VPOR | 0.8 | 1.1 | 1.5 | V | VDD supply falling | 56 |
| High-voltage detect low trip point | VLVDH | 2.48 | 2.56 | 2.64 | V | low-voltage detect, high range (LVDV=01) | 56 |
| Low-voltage warning threshold, level 1, high range | VLVW1H | 2.62 | 2.7 | 2.78 | V | high range, 1-level drop (LVWV=00) | 56 |
| Low-voltage warning threshold, level 3/4, high range | VLVW4H | 2.92 | 3 | 3.08 | V | high range, 3-level drop (LVWV=10) and 4-level drop (LVWV=11) | 57 |
| Low-voltage detect threshold, low range | VLVDL | 1.54 | 1.6 | 1.66 | V | low range (LVDV=00) | 57 |
| Low-voltage warning threshold, level 1, low range | VLVW1L | 1.74 | 1.8 | 1.86 | V | low range, 1-level drop (LVWV=00) | 57 |
| Low-voltage warning threshold, level 4, low range | VLVW4L | 2.04 | 2.1 | 2.16 | V | low range, 4-level drop (LVWV=11) | 57 |
| Bandgap voltage reference | VBG | 0.97 | 1 | 1.03 | V | 57 | |
| Internal low-power oscillator period | tLPO | 900 | 1000 | 1100 | μs | factory-trimmed | 57 |
| VBAT POR detect voltage, VBAT falling | VPOR_VBAT | 0.8 | 1.1 | 1.5 | V | VBAT supply falling | 57 |
| Output low voltage, general-purpose drive pins | VOL | 0.5 | V | excl. RESET_B; 2.7 V ≤ VDD ≤ 3.6 V, IOL = 5 mA | 57 | ||
| Output low voltage, high drive pins | VOL | 0.5 | V | excl. RESET_B; 2.7 V ≤ VDD ≤ 3.6 V, IOL = 20 mA | 57 | ||
| Output low voltage, RESET_B | VOL | 0.5 | V | 2.7 V ≤ VDD ≤ 3.6 V, IOL = 3 mA | 58 | ||
| Total output high current, all ports | IOHT | 100 | mA | 57 | |||
| Total output low current, all ports | IOLT | 100 | mA | 58 | |||
| Input leakage current per pin | IIN | 0.002 | 0.5 | μA | full temperature range; all pins except high-drive pins | 58 | |
| Input leakage current, total of all pins | IIN | 1 | μA | full temperature range | 58 | ||
| Internal pull-up resistor | RPU | 20 | 50 | kΩ | 58 | ||
| Internal pull-down resistor | RPD | 20 | 50 | kΩ | 58 | ||
| Analog pin input capacitance | CIN_A | 7 | pF | 66 | |||
| Digital pin input capacitance | CIN_D | 7 | pF | 66 | |||
| System and core clock, HSRUN mode | fSYS | 120 | MHz | HSRUN mode | 66 | ||
| System and core clock, normal run mode | fSYS | 80 | MHz | normal operating mode | 66 | ||
| RUN mode current, flash code, peripheral clocks disabled, 3.0 V | IDD_RUN | 13.87 | 15.158 | mA | @ 3.0 V @25°C; all peripheral clocks disabled; execute from flash | 60 | |
| RUN mode current, flash code, peripheral clocks enabled, 3.0 V | IDD_RUN | 18.08 | 20.145 | mA | @ 3.0 V @25°C; all peripheral clocks enabled; execute from flash | 60 | |
| STOP mode current, 3.0 V | IDD_STOP | 269.63 | 292.223 | μA | @ 3.0 V @25°C | 61 | |
| External oscillator frequency, high frequency high range | fosc_hi_2 | 8 | 32 | MHz | MCG_C2[RANGE]=1x | 77 | |
| ADC supply voltage VDDA | VDDA | 1.71 | 3.6 | V | absolute value | 80 | |
| Thermal resistance, junction to ambient, natural convection, single layer (1S) | RθJA | 61 | °C/W | 64 LQFP column; JEDEC JESD51-2, natural convection, 1S board | 68 | ||
| Thermal resistance, junction to ambient, natural convection, four layer (2s2p) | RθJA | 43 | °C/W | 64 LQFP column; JEDEC JESD51-2, natural convection, 2s2p board | 68 | ||
| Thermal resistance, junction to ambient, 200 ft/min airflow, single layer (1S) | RθJMA | 49 | °C/W | 64 LQFP column; 200 ft/min forced convection, 1S board | 68 | ||
| Thermal resistance, junction to board | RθJB | 25 | °C/W | 64 LQFP column; JEDEC JESD51-8 | 68 | ||
| Thermal resistance, junction to case | RθJC | 13 | °C/W | 64 LQFP column; MIL SPEC-883 Method 1012.1 | 68 | ||
| Thermal characterization parameter, junction to package top | ΨJT | 2 | °C/W | 64 LQFP column; natural convection, JEDEC JESD51-2 | 68 |
CAD (KiCad official)
- Symbol:
MKS22FN256VLH12 - Footprint:
Package_QFP:LQFP-64_10x10mm_P0.5mm - 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
mks22fn256vlh12-etched.step/mks22fn256vlh12-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mks22fn256vlh12.step/mks22fn256vlh12.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (108 pp, sha256
dd02f2252bc40194, retrieved 2026-10-30, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).