Generated by kicad-footprint-generator · KiCad file format 20260206
MKL27Z256VFM4
NXP Semicon · Pre-ordered MCUs · QFN-32-EP(5x5)
MKL27Z256VFM4 from NXP Semicon, in a QFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PTE0 | bidirectional | Port E bit 0 GPIO (default function DISABLED) with alternate functions listed in the multiplexing table, including CLKOUT32K, SPI1_MISO, LPUART1_TX, RTC_CLKOUT, CMP0_OUT and I2C1_SDA. |
| 2 | VSS | power_in | Ground reference pin for the device digital supply. |
| 3 | USB0_DP | bidirectional | USB full-speed 2.0 device D+ data line. |
| 4 | USB0_DM | bidirectional | USB full-speed 2.0 device D- data line. |
| 5 | VOUT33 | power_out | 3.3 V output of the on-chip USB voltage regulator, as named in the 32 QFN pin assignment. |
| 6 | VREGIN | power_in | Input supply pin of the on-chip USB voltage regulator, as named in the 32 QFN pin assignment. |
| 7 | VDDA | power_in | Analog supply pin for the on-chip analog modules; the device supply range is 1.71 to 3.6 V. |
| 8 | VSSA | power_in | Ground reference pin for the analog modules. |
| 9 | PTE30 | bidirectional | Port E bit 30 GPIO whose analog alternate functions are the 12-bit DAC0 output, ADC0 channel SE23 and CMP0 input IN4. |
| 10 | PTA0 | bidirectional | Port A bit 0 GPIO that alternately serves as the Serial Wire Debug clock SWD_CLK. |
| 11 | PTA1 | bidirectional | Port A bit 1 GPIO with alternate functions including LPUART0_RX and TPM2_CH0. |
| 12 | PTA2 | bidirectional | Port A bit 2 GPIO with alternate functions including LPUART0_TX and TPM2_CH1. |
| 13 | PTA3 | bidirectional | Port A bit 3 GPIO that alternately serves as the Serial Wire Debug data pin SWD_DIO. |
| 14 | PTA4 | bidirectional | Port A bit 4 GPIO that alternately serves as the non-maskable interrupt input NMI_b. |
| 15 | VDD | power_in | Digital power supply; the device operates from 1.71 to 3.6 V. |
| 16 | VSS | power_in | Ground reference pin for the device digital supply. |
| 17 | PTA18 | bidirectional | Port A bit 18 GPIO that alternately serves as the EXTAL0 crystal oscillator input, with LPUART1_RX and TPM_CLKIN0 also listed. |
| 18 | PTA19 | bidirectional | Port A bit 19 GPIO that alternately serves as the XTAL0 crystal oscillator output, with LPUART1_TX and TPM_CLKIN1 also listed. |
| 19 | PTA20 | input | Active-low RESET_b reset input, which is also the default function of Port A bit 20. |
| 20 | PTB0/LLWU_P5 | bidirectional | Port B bit 0 GPIO with ADC0_SE8, I2C0_SCL and TPM1_CH0 alternate functions, and LLWU wakeup input LLWU_P5. |
| 21 | PTB1 | bidirectional | Port B bit 1 GPIO with ADC0_SE9, I2C0_SDA and TPM1_CH1 alternate functions. |
| 22 | PTC1/LLWU_P6/RTC_CLKIN | bidirectional | Port C bit 1 GPIO with ADC0_SE15, I2C1_SCL, TPM0_CH0 and I2S0_TXD0 alternate functions, plus LLWU wakeup input LLWU_P6 and RTC clock input RTC_CLKIN. |
| 23 | PTC2 | bidirectional | Port C bit 2 GPIO with ADC0_SE11, I2C1_SDA, TPM0_CH1 and I2S0_TX_FS alternate functions. |
| 24 | PTC3/LLWU_P7 | bidirectional | Port C bit 3 GPIO with SPI1_SCK, LPUART1_RX, TPM0_CH2, CLKOUT and I2S0_TX_BCLK alternate functions, plus LLWU wakeup input LLWU_P7. |
| 25 | PTC4/LLWU_P8 | bidirectional | Port C bit 4 GPIO with SPI0_SS, LPUART1_TX, TPM0_CH3 and I2S0_MCLK alternate functions, plus LLWU wakeup input LLWU_P8. |
| 26 | PTC5/LLWU_P9 | bidirectional | Port C bit 5 GPIO with SPI0_SCK, LPTMR0_ALT2, I2S0_RXD0 and CMP0_OUT alternate functions, plus LLWU wakeup input LLWU_P9. |
| 27 | PTC6/LLWU_P10 | bidirectional | Port C bit 6 GPIO with CMP0_IN0 analog input, SPI0_MOSI, EXTRG_IN and I2S0_RX_BCLK alternate functions, plus LLWU wakeup input LLWU_P10. |
| 28 | PTC7 | bidirectional | Port C bit 7 GPIO with CMP0_IN1 analog input, SPI0_MISO, audioUSB_SOF_OUT and I2S0_RX_FS alternate functions. |
| 29 | PTD4/LLWU_P14 | bidirectional | Port D bit 4 GPIO with SPI1_SS, UART2_RX, TPM0_CH4 and FXIO0_D4 alternate functions, plus LLWU wakeup input LLWU_P14. |
| 30 | PTD5 | bidirectional | Port D bit 5 GPIO with ADC0_SE6b analog input, SPI1_SCK, UART2_TX, TPM0_CH5 and FXIO0_D5 alternate functions. |
| 31 | PTD6/LLWU_P15 | bidirectional | Port D bit 6 GPIO with ADC0_SE7b analog input, SPI1_MOSI, LPUART0_RX, SPI1_MISO and FXIO0_D6 alternate functions, plus LLWU wakeup input LLWU_P15. |
| 32 | PTD7 | bidirectional | Port D bit 7 GPIO with SPI1_MISO, LPUART0_TX, SPI1_MOSI and FXIO0_D7 alternate functions. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | QFN-32-EP(5x5) |
| Category | Embedded Processors & Controllers |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage temperature | TSTG | -55 | 150 | °C | 5 | ||
| Solder temperature, lead-free | TSDR | 260 | °C | 5 | |||
| ESD voltage, human body model | VHBM | -2000 | 2000 | V | JEDEC JESD22-A114 (HBM) | 5 | |
| ESD voltage, charged-device model | VCDM | -500 | 500 | V | JEDEC JESD22-C101 | 5 | |
| Latch-up current | ILAT | -100 | 100 | mA | Ambient temperature 105 °C | 5 | |
| Digital supply voltage | VDD | -0.3 | 3.8 | V | 6 | ||
| Digital supply current | IDD | 120 | mA | 6 | |||
| Instantaneous maximum current single pin limit | ID | -25 | 25 | mA | Applies to all port pins | 6 | |
| IO pin input voltage | VIO | -0.3 | V | Max printed as VDD + 0.3 V | 6 | ||
| USB_DP input voltage | VUSB_DP | -0.3 | 3.63 | V | 6 | ||
| USB_DM input voltage | VUSB_DM | -0.3 | 3.63 | V | 6 | ||
| USB regulator input | VREGIN | -0.3 | 6 | V | 6 | ||
| Supply voltage | VDD | 1.71 | 3.6 | V | 7 | ||
| Analog supply voltage | VDDA | 1.71 | 3.6 | V | 7 | ||
| VDD-to-VDDA differential voltage | VDD, VDDA | -0.1 | 0.1 | V | 7 | ||
| VSS-to-VSSA differential voltage | VSS, VSSA | -0.1 | 0.1 | V | 7 | ||
| Input high voltage | VIH | 0.7 | ×VDD | 2.7 V ≤ VDD ≤ 3.6 V | 7 | ||
| Input high voltage | VIH | 0.75 | ×VDD | 1.7 V ≤ VDD ≤ 2.7 V | 7 | ||
| Input low voltage | VIL | 0.35 | ×VDD | 2.7 V ≤ VDD ≤ 3.6 V | 7 | ||
| Input low voltage | VIL | 0.3 | ×VDD | 1.7 V ≤ VDD ≤ 2.7 V | 7 | ||
| Input hysteresis | VHYS | 0.06 | ×VDD | 7 | |||
| IO pin negative DC injection current, single pin | IICIO | -3 | mA | VIN < VSS-0.3 V | 7 | ||
| Contiguous pin DC injection current, regional limit | IICcont | -25 | mA | Negative current injection; includes 16 contiguous pins | 7 | ||
| VDD voltage required to retain RAM | VRAM | 1.2 | V | 7 | |||
| Temperature range | -40 | 105 | °C | 2 | |||
| Falling VDD POR detect voltage | VPOR | 0.8 | 1.1 | 1.5 | V | 7 | |
| Oscillator crystal or resonator frequency, low-frequency mode | fosc_lo | 32 | 40 | kHz | MCG_C2[RANGE]=00 | 29 | |
| Oscillator crystal or resonator frequency, high-frequency low range | fosc_hi_1 | 3 | 8 | MHz | MCG_C2[RANGE]=01 | 29 | |
| Oscillator crystal or resonator frequency, high-frequency high range | fosc_hi_2 | 8 | 32 | MHz | MCG_C2[RANGE]=1x | 29 | |
| Input clock frequency (external clock mode) | fec_extal | 48 | MHz | External clock mode | 29 | ||
| Input clock duty cycle (external clock mode) | tdc_extal | 40 | 50 | 60 | % | External clock mode | 29 |
| Delta supply voltage to VDD | ΔVDDA | -100 | 0 | 100 | mV | Delta to VDD (VDD, VDDA) | 32 |
| Ground voltage delta to VSS | ΔVSSA | -100 | 0 | 100 | mV | Delta to VSS (VSS, VSSA) | 32 |
| ADC conversion clock frequency | fADCK | 1 | 24 | MHz | ≤13-bit mode | 32 | |
| ADC conversion clock frequency | fADCK | 2 | 12 | MHz | 16-bit mode | 32 | |
| ADC conversion rate | Crate | 20 | 1200 | ksps | ≤13-bit modes; no ADC hardware averaging; continuous conversions enabled, subsequent conversion time | 32 | |
| ADC conversion rate | Crate | 37.037 | 461.467 | ksps | 16-bit mode; no ADC hardware averaging; continuous conversions enabled, subsequent conversion time | 32 | |
| Analog source resistance (external) | RAS | 5 | kΩ | 13-bit / 12-bit modes; fADCK < 4 MHz | 32 | ||
| ADC supply current | IDDA_ADC | 0.215 | 1.7 | mA | 33 | ||
| ADC asynchronous clock source | fADACK | 1.2 | 2.4 | 3.9 | MHz | ADLPC = 1, ADHSC = 0 | 33 |
| ADC asynchronous clock source | fADACK | 2.4 | 4 | 6.1 | MHz | ADLPC = 1, ADHSC = 1 | 33 |
| ADC asynchronous clock source | fADACK | 3 | 5.2 | 7.3 | MHz | ADLPC = 0, ADHSC = 0 | 33 |
| ADC asynchronous clock source | fADACK | 4.4 | 6.2 | 9.5 | MHz | ADLPC = 0, ADHSC = 1 | 33 |
| Total unadjusted error | TUE | -6.8 | 4 | 6.8 | LSB | 12-bit modes; VREFH = VDDA, VREFL = VSSA | 33 |
| Longword program high-voltage time | thvpgm4 | 7.5 | 18 | μs | 30 | ||
| Erase Block high-voltage time for 128 KB | thversblk128k | 52 | 452 | ms | Maximum based on expectations at cycling end-of-life | 30 | |
| Erase Flash Block execution time, 128 KB program flash | tersblk128k | 88 | 600 | ms | Maximum based on expectations at cycling end-of-life | 30 | |
| Read 1s Block execution time, 128 KB program flash | trd1blk128k | 1.7 | ms | 30 | |||
| Average current adder during high voltage flash programming | IDD_PGM | 2.5 | 6 | mA | 31 | ||
| Average current adder during high voltage flash erase | IDD_ERS | 1.5 | 4 | mA | 31 | ||
| Data retention after up to 10 K cycles | tnvmretp10k | 5 | 50 | years | 31 | ||
| Data retention after up to 1 K cycles | tnvmretp1k | 20 | 100 | years | 31 | ||
| Cycling endurance (printed 10 K min, 50 K typ) | nnvmcycp | 10 | 50 | K cycles | Cycling endurance at -40 °C ≤ Tj ≤ 125 °C | 31 | |
| VREGIN input supply voltage | VREGIN | 2.7 | 5.5 | V | 43 | ||
| Quiescent current, run mode | IDDon | 125 | 186 | μA | Run mode, load current equal zero, input supply (VREGIN) > 3.6 V | 43 | |
| Maximum load current, run mode | ILOADrun | 120 | mA | Run mode | 43 | ||
| Regulator output voltage, run mode | VReg33out | 3 | 3.3 | 3.6 | V | Input supply (VREGIN) > 3.6 V, run mode | 43 |
| External output capacitor | COUT | 1.76 | 2.2 | 8.16 | μF | 43 | |
| Reference voltage | VDACR | 1.13 | 3.6 | V | 39 |
CAD (KiCad official)
- Symbol:
MKL27Z256VFM4 - Footprint:
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm - 3D model: QFN-32-EP(5x5) (KiCad packages3D, STEP)
- 3D model files:
mkl27z256vfm4-etched.step/mkl27z256vfm4-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mkl27z256vfm4.step/mkl27z256vfm4.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (67 pp, sha256
71c160185f0967a8, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).