Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MKL27Z256VFM4

NXP Semicon · Pre-ordered MCUs · QFN-32-EP(5x5)

MKL27Z256VFM4 from NXP Semicon, in a QFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PTE0 bidirectional Port E bit 0 GPIO (default function DISABLED) with alternate functions listed in the multiplexing table, including CLKOUT32K, SPI1_MISO, LPUART1_TX, RTC_CLKOUT, CMP0_OUT and I2C1_SDA.
2 VSS power_in Ground reference pin for the device digital supply.
3 USB0_DP bidirectional USB full-speed 2.0 device D+ data line.
4 USB0_DM bidirectional USB full-speed 2.0 device D- data line.
5 VOUT33 power_out 3.3 V output of the on-chip USB voltage regulator, as named in the 32 QFN pin assignment.
6 VREGIN power_in Input supply pin of the on-chip USB voltage regulator, as named in the 32 QFN pin assignment.
7 VDDA power_in Analog supply pin for the on-chip analog modules; the device supply range is 1.71 to 3.6 V.
8 VSSA power_in Ground reference pin for the analog modules.
9 PTE30 bidirectional Port E bit 30 GPIO whose analog alternate functions are the 12-bit DAC0 output, ADC0 channel SE23 and CMP0 input IN4.
10 PTA0 bidirectional Port A bit 0 GPIO that alternately serves as the Serial Wire Debug clock SWD_CLK.
11 PTA1 bidirectional Port A bit 1 GPIO with alternate functions including LPUART0_RX and TPM2_CH0.
12 PTA2 bidirectional Port A bit 2 GPIO with alternate functions including LPUART0_TX and TPM2_CH1.
13 PTA3 bidirectional Port A bit 3 GPIO that alternately serves as the Serial Wire Debug data pin SWD_DIO.
14 PTA4 bidirectional Port A bit 4 GPIO that alternately serves as the non-maskable interrupt input NMI_b.
15 VDD power_in Digital power supply; the device operates from 1.71 to 3.6 V.
16 VSS power_in Ground reference pin for the device digital supply.
17 PTA18 bidirectional Port A bit 18 GPIO that alternately serves as the EXTAL0 crystal oscillator input, with LPUART1_RX and TPM_CLKIN0 also listed.
18 PTA19 bidirectional Port A bit 19 GPIO that alternately serves as the XTAL0 crystal oscillator output, with LPUART1_TX and TPM_CLKIN1 also listed.
19 PTA20 input Active-low RESET_b reset input, which is also the default function of Port A bit 20.
20 PTB0/LLWU_P5 bidirectional Port B bit 0 GPIO with ADC0_SE8, I2C0_SCL and TPM1_CH0 alternate functions, and LLWU wakeup input LLWU_P5.
21 PTB1 bidirectional Port B bit 1 GPIO with ADC0_SE9, I2C0_SDA and TPM1_CH1 alternate functions.
22 PTC1/LLWU_P6/RTC_CLKIN bidirectional Port C bit 1 GPIO with ADC0_SE15, I2C1_SCL, TPM0_CH0 and I2S0_TXD0 alternate functions, plus LLWU wakeup input LLWU_P6 and RTC clock input RTC_CLKIN.
23 PTC2 bidirectional Port C bit 2 GPIO with ADC0_SE11, I2C1_SDA, TPM0_CH1 and I2S0_TX_FS alternate functions.
24 PTC3/LLWU_P7 bidirectional Port C bit 3 GPIO with SPI1_SCK, LPUART1_RX, TPM0_CH2, CLKOUT and I2S0_TX_BCLK alternate functions, plus LLWU wakeup input LLWU_P7.
25 PTC4/LLWU_P8 bidirectional Port C bit 4 GPIO with SPI0_SS, LPUART1_TX, TPM0_CH3 and I2S0_MCLK alternate functions, plus LLWU wakeup input LLWU_P8.
26 PTC5/LLWU_P9 bidirectional Port C bit 5 GPIO with SPI0_SCK, LPTMR0_ALT2, I2S0_RXD0 and CMP0_OUT alternate functions, plus LLWU wakeup input LLWU_P9.
27 PTC6/LLWU_P10 bidirectional Port C bit 6 GPIO with CMP0_IN0 analog input, SPI0_MOSI, EXTRG_IN and I2S0_RX_BCLK alternate functions, plus LLWU wakeup input LLWU_P10.
28 PTC7 bidirectional Port C bit 7 GPIO with CMP0_IN1 analog input, SPI0_MISO, audioUSB_SOF_OUT and I2S0_RX_FS alternate functions.
29 PTD4/LLWU_P14 bidirectional Port D bit 4 GPIO with SPI1_SS, UART2_RX, TPM0_CH4 and FXIO0_D4 alternate functions, plus LLWU wakeup input LLWU_P14.
30 PTD5 bidirectional Port D bit 5 GPIO with ADC0_SE6b analog input, SPI1_SCK, UART2_TX, TPM0_CH5 and FXIO0_D5 alternate functions.
31 PTD6/LLWU_P15 bidirectional Port D bit 6 GPIO with ADC0_SE7b analog input, SPI1_MOSI, LPUART0_RX, SPI1_MISO and FXIO0_D6 alternate functions, plus LLWU wakeup input LLWU_P15.
32 PTD7 bidirectional Port D bit 7 GPIO with SPI1_MISO, LPUART0_TX, SPI1_MOSI and FXIO0_D7 alternate functions.
33 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer NXP Semicon
Package QFN-32-EP(5x5)
Category Embedded Processors & Controllers
Pins 33

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage temperature TSTG -55 150 °C 5
Solder temperature, lead-free TSDR 260 °C 5
ESD voltage, human body model VHBM -2000 2000 V JEDEC JESD22-A114 (HBM) 5
ESD voltage, charged-device model VCDM -500 500 V JEDEC JESD22-C101 5
Latch-up current ILAT -100 100 mA Ambient temperature 105 °C 5
Digital supply voltage VDD -0.3 3.8 V 6
Digital supply current IDD 120 mA 6
Instantaneous maximum current single pin limit ID -25 25 mA Applies to all port pins 6
IO pin input voltage VIO -0.3 V Max printed as VDD + 0.3 V 6
USB_DP input voltage VUSB_DP -0.3 3.63 V 6
USB_DM input voltage VUSB_DM -0.3 3.63 V 6
USB regulator input VREGIN -0.3 6 V 6
Supply voltage VDD 1.71 3.6 V 7
Analog supply voltage VDDA 1.71 3.6 V 7
VDD-to-VDDA differential voltage VDD, VDDA -0.1 0.1 V 7
VSS-to-VSSA differential voltage VSS, VSSA -0.1 0.1 V 7
Input high voltage VIH 0.7 ×VDD 2.7 V ≤ VDD ≤ 3.6 V 7
Input high voltage VIH 0.75 ×VDD 1.7 V ≤ VDD ≤ 2.7 V 7
Input low voltage VIL 0.35 ×VDD 2.7 V ≤ VDD ≤ 3.6 V 7
Input low voltage VIL 0.3 ×VDD 1.7 V ≤ VDD ≤ 2.7 V 7
Input hysteresis VHYS 0.06 ×VDD 7
IO pin negative DC injection current, single pin IICIO -3 mA VIN < VSS-0.3 V 7
Contiguous pin DC injection current, regional limit IICcont -25 mA Negative current injection; includes 16 contiguous pins 7
VDD voltage required to retain RAM VRAM 1.2 V 7
Temperature range -40 105 °C 2
Falling VDD POR detect voltage VPOR 0.8 1.1 1.5 V 7
Oscillator crystal or resonator frequency, low-frequency mode fosc_lo 32 40 kHz MCG_C2[RANGE]=00 29
Oscillator crystal or resonator frequency, high-frequency low range fosc_hi_1 3 8 MHz MCG_C2[RANGE]=01 29
Oscillator crystal or resonator frequency, high-frequency high range fosc_hi_2 8 32 MHz MCG_C2[RANGE]=1x 29
Input clock frequency (external clock mode) fec_extal 48 MHz External clock mode 29
Input clock duty cycle (external clock mode) tdc_extal 40 50 60 % External clock mode 29
Delta supply voltage to VDD ΔVDDA -100 0 100 mV Delta to VDD (VDD, VDDA) 32
Ground voltage delta to VSS ΔVSSA -100 0 100 mV Delta to VSS (VSS, VSSA) 32
ADC conversion clock frequency fADCK 1 24 MHz ≤13-bit mode 32
ADC conversion clock frequency fADCK 2 12 MHz 16-bit mode 32
ADC conversion rate Crate 20 1200 ksps ≤13-bit modes; no ADC hardware averaging; continuous conversions enabled, subsequent conversion time 32
ADC conversion rate Crate 37.037 461.467 ksps 16-bit mode; no ADC hardware averaging; continuous conversions enabled, subsequent conversion time 32
Analog source resistance (external) RAS 5 kΩ 13-bit / 12-bit modes; fADCK < 4 MHz 32
ADC supply current IDDA_ADC 0.215 1.7 mA 33
ADC asynchronous clock source fADACK 1.2 2.4 3.9 MHz ADLPC = 1, ADHSC = 0 33
ADC asynchronous clock source fADACK 2.4 4 6.1 MHz ADLPC = 1, ADHSC = 1 33
ADC asynchronous clock source fADACK 3 5.2 7.3 MHz ADLPC = 0, ADHSC = 0 33
ADC asynchronous clock source fADACK 4.4 6.2 9.5 MHz ADLPC = 0, ADHSC = 1 33
Total unadjusted error TUE -6.8 4 6.8 LSB 12-bit modes; VREFH = VDDA, VREFL = VSSA 33
Longword program high-voltage time thvpgm4 7.5 18 μs 30
Erase Block high-voltage time for 128 KB thversblk128k 52 452 ms Maximum based on expectations at cycling end-of-life 30
Erase Flash Block execution time, 128 KB program flash tersblk128k 88 600 ms Maximum based on expectations at cycling end-of-life 30
Read 1s Block execution time, 128 KB program flash trd1blk128k 1.7 ms 30
Average current adder during high voltage flash programming IDD_PGM 2.5 6 mA 31
Average current adder during high voltage flash erase IDD_ERS 1.5 4 mA 31
Data retention after up to 10 K cycles tnvmretp10k 5 50 years 31
Data retention after up to 1 K cycles tnvmretp1k 20 100 years 31
Cycling endurance (printed 10 K min, 50 K typ) nnvmcycp 10 50 K cycles Cycling endurance at -40 °C ≤ Tj ≤ 125 °C 31
VREGIN input supply voltage VREGIN 2.7 5.5 V 43
Quiescent current, run mode IDDon 125 186 μA Run mode, load current equal zero, input supply (VREGIN) > 3.6 V 43
Maximum load current, run mode ILOADrun 120 mA Run mode 43
Regulator output voltage, run mode VReg33out 3 3.3 3.6 V Input supply (VREGIN) > 3.6 V, run mode 43
External output capacitor COUT 1.76 2.2 8.16 μF 43
Reference voltage VDACR 1.13 3.6 V 39

CAD (KiCad official)

  • Symbol: MKL27Z256VFM4
  • Footprint: Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm
  • 3D model: QFN-32-EP(5x5) (KiCad packages3D, STEP)
  • 3D model files: mkl27z256vfm4-etched.step / mkl27z256vfm4-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mkl27z256vfm4.step / mkl27z256vfm4.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NXP Semicon datasheet (67 pp, sha256 71c160185f0967a8, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF