main
Ray
Publish 0.1.0
221128e
MKE06Z64VLD4
NXP Semicon · Pre-ordered MCUs · LQFP-44(10x10)
MKE06Z64VLD4 from NXP Semicon, in a LQFP-44(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PTD1 | bidirectional | Port D GPIO PTD1 (default function listed as DISABLED); the table lists alternates KBI0_P25, FTM2_CH3 and SPI1_MOSI, and PTD1 is a high-current drive pin when used as output. |
| 2 | PTD0 | bidirectional | Port D GPIO PTD0; the table lists alternates KBI0_P24, FTM2_CH2 and SPI1_SCK, and PTD0 is a high-current drive pin when used as output. |
| 3 | PTE7 | bidirectional | Port E GPIO PTE7; the table lists alternates KBI1_P7, TCLK2, FTM1_CH1 and CAN0_TX. |
| 4 | PTH2 | bidirectional | Port H GPIO PTH2; the table lists alternates KBI1_P26, BUSOUT, FTM1_CH0 and CAN0_RX. |
| 5 | VDD | power_in | Digital supply pin; the device operating voltage range is stated as 2.7 to 5.5 V. |
| 6 | VDDA | power_in | Analog supply pin; the datasheet notes VREFH and VDDA are internally connected only in 64-pin packages, so they are separate on this 44-pin package. |
| 7 | VREFL | power_in | Low reference voltage pin VREFL; no further limits are stated in this excerpt. |
| 8 | VSS/VSSA | power_in | Ground pin for digital and analog sections; the datasheet states VSS and VSSA are internally connected. |
| 9 | PTB7 | bidirectional | Default function is the oscillator input EXTAL, also usable as Port B GPIO PTB7 with alternates KBI0_P15 and I2C0_SCL. |
| 10 | PTB6 | bidirectional | Default function is the oscillator output XTAL, also usable as Port B GPIO PTB6 with alternates KBI0_P14 and I2C0_SDA. |
| 11 | PTI4 | bidirectional | Port I GPIO PTI4 with the IRQ external interrupt listed as its alternate function. |
| 12 | PTB5 | bidirectional | Port B GPIO PTB5; high-current drive pin when used as output, with alternates KBI0_P13, FTM2_CH5, SPI0_PCS and ACMP1_OUT. |
| 13 | PTB4 | bidirectional | Port B GPIO PTB4 with NMI_b as default function; high-current drive pin when used as output, with alternates KBI0_P12, FTM2_CH4, SPI0_MISO and ACMP1_IN2. |
| 14 | PTC3 | bidirectional | Port C GPIO PTC3 with ADC0_SE11 analog input; alternates KBI0_P19 and FTM2_CH3. |
| 15 | PTC2 | bidirectional | Port C GPIO PTC2 with ADC0_SE10 analog input; alternates KBI0_P18 and FTM2_CH2. |
| 16 | PTD7 | bidirectional | Port D GPIO PTD7; the table lists alternates KBI0_P31 and UART2_TX. |
| 17 | PTD6 | bidirectional | Port D GPIO PTD6; the table lists alternates KBI0_P30 and UART2_RX. |
| 18 | PTD5 | bidirectional | Port D GPIO PTD5; the table lists alternates KBI0_P29 and PWT_IN0. |
| 19 | PTC1 | bidirectional | Port C GPIO PTC1 with ADC0_SE9 analog input; alternates KBI0_P17 and FTM2_CH1. |
| 20 | PTC0 | bidirectional | Port C GPIO PTC0 with ADC0_SE8 analog input; alternates KBI0_P16 and FTM2_CH0. |
| 21 | PTB3 | bidirectional | Port B GPIO PTB3 with ADC0_SE7 analog input; alternates KBI0_P11, SPI0_MOSI and FTM0_CH1. |
| 22 | PTB2 | bidirectional | Port B GPIO PTB2 with ADC0_SE6 analog input; alternates KBI0_P10, SPI0_SCK and FTM0_CH0. |
| 23 | PTB1 | bidirectional | Port B GPIO PTB1 with ADC0_SE5 analog input; alternates KBI0_P9 and UART0_TX. |
| 24 | PTB0 | bidirectional | Port B GPIO PTB0 with ADC0_SE4 analog input; alternates KBI0_P8, UART0_RX and PWT_IN1. |
| 25 | PTA7 | bidirectional | Port A GPIO PTA7 with ADC0_SE3 analog input; alternates KBI0_P7, FTM2_FLT2 and ACMP1_IN1. |
| 26 | PTA6 | bidirectional | Port A GPIO PTA6 with ADC0_SE2 analog input; alternates KBI0_P6, FTM2_FLT1 and ACMP1_IN0. |
| 27 | VSS | power_in | Ground pin (VSS). |
| 28 | VDD | power_in | Digital supply pin; the device operating voltage range is stated as 2.7 to 5.5 V. |
| 29 | PTD4 | bidirectional | Port D GPIO PTD4; the table lists alternate KBI0_P28. |
| 30 | PTD3 | bidirectional | Port D GPIO PTD3; the table lists alternates KBI0_P27 and SPI1_PCS. |
| 31 | PTD2 | bidirectional | Port D GPIO PTD2; the table lists alternates KBI0_P26 and SPI1_MISO. |
| 32 | PTA3 | bidirectional | Port A GPIO PTA3, a true open-drain pin when operated as output; alternates KBI0_P3, UART0_TX and I2C0_SCL. |
| 33 | PTA2 | bidirectional | Port A GPIO PTA2, a true open-drain pin when operated as output; alternates KBI0_P2, UART0_RX and I2C0_SDA. |
| 34 | PTA1 | bidirectional | Port A GPIO PTA1 with ADC0_SE1 analog input; alternates KBI0_P1, FTM0_CH1, ACMP0_IN1 and an I2C0 SDA output signal (name split across lines in the extracted text). |
| 35 | PTA0 | bidirectional | Port A GPIO PTA0 with ADC0_SE0 analog input; alternates KBI0_P0, FTM0_CH0, ACMP0_IN0 and an I2C0 SCL output signal (name split across lines in the extracted text). |
| 36 | PTC7 | bidirectional | Port C GPIO PTC7; the table lists alternates KBI0_P23, UART1_TX and CAN0_TX. |
| 37 | PTC6 | bidirectional | Port C GPIO PTC6; the table lists alternates KBI0_P22, UART1_RX and CAN0_RX. |
| 38 | PTE2 | bidirectional | Port E GPIO PTE2; the table lists alternates KBI1_P2, SPI0_MISO and PWT_IN0. |
| 39 | PTE1 | bidirectional | Port E GPIO PTE1, a high-current drive pin when used as output; alternates KBI1_P1, SPI0_MOSI and I2C1_SCL. |
| 40 | PTE0 | bidirectional | Port E GPIO PTE0, a high-current drive pin when used as output; alternates KBI1_P0, SPI0_SCK, TCLK1 and I2C1_SDA. |
| 41 | PTC5 | bidirectional | Port C GPIO PTC5; the table lists alternates KBI0_P21, FTM1_CH1 and RTC_CLKOUT. |
| 42 | PTC4 | bidirectional | Default function is the serial wire debug clock SWD_CLK, also usable as Port C GPIO PTC4 with alternates KBI0_P20, RTC_CLKOUT, FTM1_CH0 and ACMP0_IN2. |
| 43 | PTA5 | input | Default function is the active-low reset input RESET_b, also usable as Port A GPIO PTA5 with alternates KBI0_P5, IRQ and TCLK0; no electrical limits for RESET_b are stated in this excerpt. |
| 44 | PTA4 | bidirectional | Default function is the serial wire debug data I/O SWD_DIO, also usable as Port A GPIO PTA4 with alternates KBI0_P4 and ACMP0_OUT. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | LQFP-44(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 44 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Digital supply voltage | VDD | -0.3 | 6 | V | 7 | ||
| Maximum current into VDD | IDD | 120 | mA | 7 | |||
| Input voltage of true open drain pins | VIN | -0.3 | 6 | V | True open drain pins (PTA2, PTA3) | 7 | |
| Instantaneous maximum current single pin limit | ID | -25 | 25 | mA | Applies to all port pins | 7 | |
| Storage temperature | TSTG | -55 | 150 | °C | 6 | ||
| Solder temperature, lead-free | TSDR | 260 | °C | 6 | |||
| Electrostatic discharge voltage, human body model | VHBM | -6000 | 6000 | V | 6 | ||
| Electrostatic discharge voltage, charged-device model | VCDM | -500 | 500 | V | 6 | ||
| Latch-up current at ambient temperature of 125°C | ILAT | -100 | 100 | mA | Ambient temperature 125 °C | 6 | |
| Operating voltage | 2.7 | 5.5 | V | 7 | |||
| Ambient temperature | TA | -40 | 105 | °C | 18 | ||
| Die junction temperature | TJ | -40 | 125 | °C | 18 | ||
| Output high current, max total IOH for all ports | IOHT | -100 | mA | 5 V | 8 | ||
| Output high current, max total IOH for all ports | IOHT | -60 | mA | 3 V | 8 | ||
| Output low voltage, all I/O pins standard drive | VOL | 0.8 | V | All I/O pins, standard drive strength, 5 V, Iload = 5 mA | 8 | ||
| Output low voltage, high current drive pins high-drive strength | VOL | 0.8 | V | High current drive pins, high-drive strength, 5 V, Iload = 20 mA | 8 | ||
| Output low current, max total IOL for all ports | IOLT | 100 | mA | 5 V | 8 | ||
| Output low current, max total IOL for all ports | IOLT | 60 | mA | 3 V | 8 | ||
| Input leakage current | /IIn/ | 0.1 | 1 | µA | Per pin, pins in high impedance input mode, VIN = VDD or VSS | 8 | |
| Total leakage combined for all port pins | /IINTOT/ | 2 | µA | Pins in high impedance input mode, VIN = VDD or VSS | 8 | ||
| Pullup resistors, all digital inputs | RPU | 30 | 50 | kΩ | All digital inputs when enabled (all I/O pins other than PTA2 and PTA3) | 8 | |
| Pullup resistors, PTA2 and PTA3 pins | RPU4 | 30 | 60 | kΩ | PTA2 and PTA3 pins | 8 | |
| DC injection current, single pin limit | IIC | -2 | 2 | mA | Single pin limit, VIN < VSS or VIN > VDD | 8 | |
| DC injection current, total MCU limit | IIC | -5 | 25 | mA | Total MCU limit, includes sum of all stressed pins | 8 | |
| Input capacitance, all pins | CIn | 7 | pF | All pins | 8 | ||
| RAM retention voltage | VRAM | 2 | V | 8 | |||
| POR re-arm voltage | VPOR | 1.5 | 1.75 | 2 | V | 9 | |
| Falling low-voltage detect threshold, high range | VLVDH | 4.2 | 4.3 | 4.4 | V | LVDV = 1 | 9 |
| Falling low-voltage detect threshold, low range | VLVDL | 2.56 | 2.61 | 2.66 | V | LVDV = 0 | 9 |
| Buffered bandgap output | VBG | 1.14 | 1.16 | 1.18 | V | Factory trimmed at VDD = 5.0 V, 25 °C | 9 |
| Run supply current, FBE mode, all clocks enabled, run from RAM, 24/24 MHz | RIDD | 9.8 | 14.9 | mA | VDD 5 V, -40 to 105 °C | 14 | |
| Run supply current, FBE mode, all clocks enabled, run from RAM, 24/24 MHz | RIDD | 9.6 | 12.8 | mA | VDD 3 V, -40 to 105 °C | 14 | |
| Run supply current, FBE mode, all clocks disabled and gated, run from RAM, 24/24 MHz | RIDD | 7.7 | 12.5 | mA | VDD 5 V, -40 to 105 °C | 14 | |
| Run supply current, FBE mode, all clocks disabled and gated, run from RAM, 24/24 MHz | RIDD | 7.6 | 9.5 | mA | VDD 3 V, -40 to 105 °C | 14 | |
| Wait mode current, FEI mode, all clocks enabled, 24/24 MHz | WIDD | 6.5 | 7.2 | mA | VDD 5 V, -40 to 105 °C | 15 | |
| Wait mode current, FEI mode, all clocks enabled, 24/24 MHz | WIDD | 6.4 | 7 | mA | VDD 3 V, -40 to 105 °C | 15 | |
| Stop mode supply current, no clocks active except 1 kHz LPO | SIDD | 2 | 105 | µA | VDD 5 V, -40 to 105 °C | 15 | |
| Stop mode supply current, no clocks active except 1 kHz LPO | SIDD | 1.9 | 95 | µA | VDD 3 V, -40 to 105 °C | 15 | |
| Absolute supply voltage, analog | VDDA | 2.7 | 5.5 | V | 25 | ||
| Delta to VDD (VDD-VDDA) | ΔVDDA | -100 | 0 | 100 | mV | VDD-VDDA | 25 |
| ADC asynchronous clock source, high speed (ADLPC = 0) | fADACK | 2 | 3.3 | 5 | MHz | ADLPC = 0 | 26 |
| ADC asynchronous clock source, low power (ADLPC = 1) | fADACK | 1.25 | 2 | 3.3 | MHz | ADLPC = 1 | 26 |
| Analog comparator supply current (operation mode) | IDDA | 10 | 20 | µA | 27 | ||
| Analog input offset voltage | VAIO | 40 | mV | 27 | |||
| System and core clock frequency | fSys | 48 | MHz | Min printed as DC | 16 | ||
| Bus frequency | fBus | 24 | MHz | Min printed as DC; tcyc = 1/fBus | 16 | ||
| Crystal or resonator frequency, low range | flo | 31.25 | 32.768 | 39.0625 | kHz | RANGE = 0; -40 to 105 °C ambient | 21 |
| Crystal or resonator frequency, high range | fhi | 4 | 24 | MHz | RANGE = 1; -40 to 105 °C ambient | 21 | |
| DCO output frequency range | fdco | 40 | 50 | MHz | FLL reference = fint_t, flo, or fhi/RDIV | 22 | |
| Flash program/erase endurance | nFLPE | 10 | 100 | k Cycles | TL to TH = -40 °C to 105 °C | 24 | |
| Data retention | tD_ret | 15 | 100 | years | Average junction temperature 85 °C after up to 10,000 program/erase cycles | 24 | |
| Thermal resistance, junction to ambient, natural convection, single-layer (1S) | RθJA | 75 | °C/W | Single-layer (1S), natural convection, JESD51-2 | 19 | ||
| Thermal resistance, junction to ambient, natural convection, four-layer (2s2p) | RθJA | 53 | °C/W | Four-layer (2s2p), natural convection, JESD51-6 | 19 | ||
| Thermal resistance, junction to ambient, 200 ft./min. air speed, single-layer (1S) | RθJMA | 62 | °C/W | Single-layer (1S), 200 ft./min. air speed | 19 | ||
| Thermal resistance, junction to ambient, 200 ft./min. air speed, four-layer (2s2p) | RθJMA | 47 | °C/W | Four-layer (2s2p), 200 ft./min. air speed | 19 | ||
| Thermal resistance, junction to board | RθJB | 34 | °C/W | 19 | |||
| Thermal resistance, junction to case | RθJC | 20 | °C/W | 19 | |||
| Thermal characterization parameter, junction to package top | ΨJT | 5 | °C/W | Natural convection | 19 |
CAD (KiCad official)
- Symbol:
MKE06Z64VLD4 - Footprint:
Package_QFP:LQFP-44_10x10mm_P0.8mm - 3D model: LQFP-44(10x10) (KiCad packages3D, STEP)
- 3D model files:
mke06z64vld4-etched.step/mke06z64vld4-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mke06z64vld4.step/mke06z64vld4.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (39 pp, sha256
73a145f536207087, retrieved 2026-10-29, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MKE06Z64VLD4
**NXP Semicon** · Pre-ordered MCUs · LQFP-44(10x10)
MKE06Z64VLD4 from NXP Semicon, in a LQFP-44(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PTD1 | bidirectional | Port D GPIO PTD1 (default function listed as DISABLED); the table lists alternates KBI0_P25, FTM2_CH3 and SPI1_MOSI, and PTD1 is a high-current drive pin when used as output. |
| 2 | PTD0 | bidirectional | Port D GPIO PTD0; the table lists alternates KBI0_P24, FTM2_CH2 and SPI1_SCK, and PTD0 is a high-current drive pin when used as output. |
| 3 | PTE7 | bidirectional | Port E GPIO PTE7; the table lists alternates KBI1_P7, TCLK2, FTM1_CH1 and CAN0_TX. |
| 4 | PTH2 | bidirectional | Port H GPIO PTH2; the table lists alternates KBI1_P26, BUSOUT, FTM1_CH0 and CAN0_RX. |
| 5 | VDD | power_in | Digital supply pin; the device operating voltage range is stated as 2.7 to 5.5 V. |
| 6 | VDDA | power_in | Analog supply pin; the datasheet notes VREFH and VDDA are internally connected only in 64-pin packages, so they are separate on this 44-pin package. |
| 7 | VREFL | power_in | Low reference voltage pin VREFL; no further limits are stated in this excerpt. |
| 8 | VSS/VSSA | power_in | Ground pin for digital and analog sections; the datasheet states VSS and VSSA are internally connected. |
| 9 | PTB7 | bidirectional | Default function is the oscillator input EXTAL, also usable as Port B GPIO PTB7 with alternates KBI0_P15 and I2C0_SCL. |
| 10 | PTB6 | bidirectional | Default function is the oscillator output XTAL, also usable as Port B GPIO PTB6 with alternates KBI0_P14 and I2C0_SDA. |
| 11 | PTI4 | bidirectional | Port I GPIO PTI4 with the IRQ external interrupt listed as its alternate function. |
| 12 | PTB5 | bidirectional | Port B GPIO PTB5; high-current drive pin when used as output, with alternates KBI0_P13, FTM2_CH5, SPI0_PCS and ACMP1_OUT. |
| 13 | PTB4 | bidirectional | Port B GPIO PTB4 with NMI_b as default function; high-current drive pin when used as output, with alternates KBI0_P12, FTM2_CH4, SPI0_MISO and ACMP1_IN2. |
| 14 | PTC3 | bidirectional | Port C GPIO PTC3 with ADC0_SE11 analog input; alternates KBI0_P19 and FTM2_CH3. |
| 15 | PTC2 | bidirectional | Port C GPIO PTC2 with ADC0_SE10 analog input; alternates KBI0_P18 and FTM2_CH2. |
| 16 | PTD7 | bidirectional | Port D GPIO PTD7; the table lists alternates KBI0_P31 and UART2_TX. |
| 17 | PTD6 | bidirectional | Port D GPIO PTD6; the table lists alternates KBI0_P30 and UART2_RX. |
| 18 | PTD5 | bidirectional | Port D GPIO PTD5; the table lists alternates KBI0_P29 and PWT_IN0. |
| 19 | PTC1 | bidirectional | Port C GPIO PTC1 with ADC0_SE9 analog input; alternates KBI0_P17 and FTM2_CH1. |
| 20 | PTC0 | bidirectional | Port C GPIO PTC0 with ADC0_SE8 analog input; alternates KBI0_P16 and FTM2_CH0. |
| 21 | PTB3 | bidirectional | Port B GPIO PTB3 with ADC0_SE7 analog input; alternates KBI0_P11, SPI0_MOSI and FTM0_CH1. |
| 22 | PTB2 | bidirectional | Port B GPIO PTB2 with ADC0_SE6 analog input; alternates KBI0_P10, SPI0_SCK and FTM0_CH0. |
| 23 | PTB1 | bidirectional | Port B GPIO PTB1 with ADC0_SE5 analog input; alternates KBI0_P9 and UART0_TX. |
| 24 | PTB0 | bidirectional | Port B GPIO PTB0 with ADC0_SE4 analog input; alternates KBI0_P8, UART0_RX and PWT_IN1. |
| 25 | PTA7 | bidirectional | Port A GPIO PTA7 with ADC0_SE3 analog input; alternates KBI0_P7, FTM2_FLT2 and ACMP1_IN1. |
| 26 | PTA6 | bidirectional | Port A GPIO PTA6 with ADC0_SE2 analog input; alternates KBI0_P6, FTM2_FLT1 and ACMP1_IN0. |
| 27 | VSS | power_in | Ground pin (VSS). |
| 28 | VDD | power_in | Digital supply pin; the device operating voltage range is stated as 2.7 to 5.5 V. |
| 29 | PTD4 | bidirectional | Port D GPIO PTD4; the table lists alternate KBI0_P28. |
| 30 | PTD3 | bidirectional | Port D GPIO PTD3; the table lists alternates KBI0_P27 and SPI1_PCS. |
| 31 | PTD2 | bidirectional | Port D GPIO PTD2; the table lists alternates KBI0_P26 and SPI1_MISO. |
| 32 | PTA3 | bidirectional | Port A GPIO PTA3, a true open-drain pin when operated as output; alternates KBI0_P3, UART0_TX and I2C0_SCL. |
| 33 | PTA2 | bidirectional | Port A GPIO PTA2, a true open-drain pin when operated as output; alternates KBI0_P2, UART0_RX and I2C0_SDA. |
| 34 | PTA1 | bidirectional | Port A GPIO PTA1 with ADC0_SE1 analog input; alternates KBI0_P1, FTM0_CH1, ACMP0_IN1 and an I2C0 SDA output signal (name split across lines in the extracted text). |
| 35 | PTA0 | bidirectional | Port A GPIO PTA0 with ADC0_SE0 analog input; alternates KBI0_P0, FTM0_CH0, ACMP0_IN0 and an I2C0 SCL output signal (name split across lines in the extracted text). |
| 36 | PTC7 | bidirectional | Port C GPIO PTC7; the table lists alternates KBI0_P23, UART1_TX and CAN0_TX. |
| 37 | PTC6 | bidirectional | Port C GPIO PTC6; the table lists alternates KBI0_P22, UART1_RX and CAN0_RX. |
| 38 | PTE2 | bidirectional | Port E GPIO PTE2; the table lists alternates KBI1_P2, SPI0_MISO and PWT_IN0. |
| 39 | PTE1 | bidirectional | Port E GPIO PTE1, a high-current drive pin when used as output; alternates KBI1_P1, SPI0_MOSI and I2C1_SCL. |
| 40 | PTE0 | bidirectional | Port E GPIO PTE0, a high-current drive pin when used as output; alternates KBI1_P0, SPI0_SCK, TCLK1 and I2C1_SDA. |
| 41 | PTC5 | bidirectional | Port C GPIO PTC5; the table lists alternates KBI0_P21, FTM1_CH1 and RTC_CLKOUT. |
| 42 | PTC4 | bidirectional | Default function is the serial wire debug clock SWD_CLK, also usable as Port C GPIO PTC4 with alternates KBI0_P20, RTC_CLKOUT, FTM1_CH0 and ACMP0_IN2. |
| 43 | PTA5 | input | Default function is the active-low reset input RESET_b, also usable as Port A GPIO PTA5 with alternates KBI0_P5, IRQ and TCLK0; no electrical limits for RESET_b are stated in this excerpt. |
| 44 | PTA4 | bidirectional | Default function is the serial wire debug data I/O SWD_DIO, also usable as Port A GPIO PTA4 with alternates KBI0_P4 and ACMP0_OUT. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | LQFP-44(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 44 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Digital supply voltage | VDD | -0.3 | | 6 | V | | 7 |
| Maximum current into VDD | IDD | | | 120 | mA | | 7 |
| Input voltage of true open drain pins | VIN | -0.3 | | 6 | V | True open drain pins (PTA2, PTA3) | 7 |
| Instantaneous maximum current single pin limit | ID | -25 | | 25 | mA | Applies to all port pins | 7 |
| Storage temperature | TSTG | -55 | | 150 | °C | | 6 |
| Solder temperature, lead-free | TSDR | | | 260 | °C | | 6 |
| Electrostatic discharge voltage, human body model | VHBM | -6000 | | 6000 | V | | 6 |
| Electrostatic discharge voltage, charged-device model | VCDM | -500 | | 500 | V | | 6 |
| Latch-up current at ambient temperature of 125°C | ILAT | -100 | | 100 | mA | Ambient temperature 125 °C | 6 |
| Operating voltage | | 2.7 | | 5.5 | V | | 7 |
| Ambient temperature | TA | -40 | | 105 | °C | | 18 |
| Die junction temperature | TJ | -40 | | 125 | °C | | 18 |
| Output high current, max total IOH for all ports | IOHT | | | -100 | mA | 5 V | 8 |
| Output high current, max total IOH for all ports | IOHT | | | -60 | mA | 3 V | 8 |
| Output low voltage, all I/O pins standard drive | VOL | | | 0.8 | V | All I/O pins, standard drive strength, 5 V, Iload = 5 mA | 8 |
| Output low voltage, high current drive pins high-drive strength | VOL | | | 0.8 | V | High current drive pins, high-drive strength, 5 V, Iload = 20 mA | 8 |
| Output low current, max total IOL for all ports | IOLT | | | 100 | mA | 5 V | 8 |
| Output low current, max total IOL for all ports | IOLT | | | 60 | mA | 3 V | 8 |
| Input leakage current | /IIn/ | | 0.1 | 1 | µA | Per pin, pins in high impedance input mode, VIN = VDD or VSS | 8 |
| Total leakage combined for all port pins | /IINTOT/ | | | 2 | µA | Pins in high impedance input mode, VIN = VDD or VSS | 8 |
| Pullup resistors, all digital inputs | RPU | 30 | | 50 | kΩ | All digital inputs when enabled (all I/O pins other than PTA2 and PTA3) | 8 |
| Pullup resistors, PTA2 and PTA3 pins | RPU4 | 30 | | 60 | kΩ | PTA2 and PTA3 pins | 8 |
| DC injection current, single pin limit | IIC | -2 | | 2 | mA | Single pin limit, VIN < VSS or VIN > VDD | 8 |
| DC injection current, total MCU limit | IIC | -5 | | 25 | mA | Total MCU limit, includes sum of all stressed pins | 8 |
| Input capacitance, all pins | CIn | | | 7 | pF | All pins | 8 |
| RAM retention voltage | VRAM | 2 | | | V | | 8 |
| POR re-arm voltage | VPOR | 1.5 | 1.75 | 2 | V | | 9 |
| Falling low-voltage detect threshold, high range | VLVDH | 4.2 | 4.3 | 4.4 | V | LVDV = 1 | 9 |
| Falling low-voltage detect threshold, low range | VLVDL | 2.56 | 2.61 | 2.66 | V | LVDV = 0 | 9 |
| Buffered bandgap output | VBG | 1.14 | 1.16 | 1.18 | V | Factory trimmed at VDD = 5.0 V, 25 °C | 9 |
| Run supply current, FBE mode, all clocks enabled, run from RAM, 24/24 MHz | RIDD | | 9.8 | 14.9 | mA | VDD 5 V, -40 to 105 °C | 14 |
| Run supply current, FBE mode, all clocks enabled, run from RAM, 24/24 MHz | RIDD | | 9.6 | 12.8 | mA | VDD 3 V, -40 to 105 °C | 14 |
| Run supply current, FBE mode, all clocks disabled and gated, run from RAM, 24/24 MHz | RIDD | | 7.7 | 12.5 | mA | VDD 5 V, -40 to 105 °C | 14 |
| Run supply current, FBE mode, all clocks disabled and gated, run from RAM, 24/24 MHz | RIDD | | 7.6 | 9.5 | mA | VDD 3 V, -40 to 105 °C | 14 |
| Wait mode current, FEI mode, all clocks enabled, 24/24 MHz | WIDD | | 6.5 | 7.2 | mA | VDD 5 V, -40 to 105 °C | 15 |
| Wait mode current, FEI mode, all clocks enabled, 24/24 MHz | WIDD | | 6.4 | 7 | mA | VDD 3 V, -40 to 105 °C | 15 |
| Stop mode supply current, no clocks active except 1 kHz LPO | SIDD | | 2 | 105 | µA | VDD 5 V, -40 to 105 °C | 15 |
| Stop mode supply current, no clocks active except 1 kHz LPO | SIDD | | 1.9 | 95 | µA | VDD 3 V, -40 to 105 °C | 15 |
| Absolute supply voltage, analog | VDDA | 2.7 | | 5.5 | V | | 25 |
| Delta to VDD (VDD-VDDA) | ΔVDDA | -100 | 0 | 100 | mV | VDD-VDDA | 25 |
| ADC asynchronous clock source, high speed (ADLPC = 0) | fADACK | 2 | 3.3 | 5 | MHz | ADLPC = 0 | 26 |
| ADC asynchronous clock source, low power (ADLPC = 1) | fADACK | 1.25 | 2 | 3.3 | MHz | ADLPC = 1 | 26 |
| Analog comparator supply current (operation mode) | IDDA | | 10 | 20 | µA | | 27 |
| Analog input offset voltage | VAIO | | | 40 | mV | | 27 |
| System and core clock frequency | fSys | | | 48 | MHz | Min printed as DC | 16 |
| Bus frequency | fBus | | | 24 | MHz | Min printed as DC; tcyc = 1/fBus | 16 |
| Crystal or resonator frequency, low range | flo | 31.25 | 32.768 | 39.0625 | kHz | RANGE = 0; -40 to 105 °C ambient | 21 |
| Crystal or resonator frequency, high range | fhi | 4 | | 24 | MHz | RANGE = 1; -40 to 105 °C ambient | 21 |
| DCO output frequency range | fdco | 40 | | 50 | MHz | FLL reference = fint_t, flo, or fhi/RDIV | 22 |
| Flash program/erase endurance | nFLPE | 10 | 100 | | k Cycles | TL to TH = -40 °C to 105 °C | 24 |
| Data retention | tD_ret | 15 | 100 | | years | Average junction temperature 85 °C after up to 10,000 program/erase cycles | 24 |
| Thermal resistance, junction to ambient, natural convection, single-layer (1S) | RθJA | | 75 | | °C/W | Single-layer (1S), natural convection, JESD51-2 | 19 |
| Thermal resistance, junction to ambient, natural convection, four-layer (2s2p) | RθJA | | 53 | | °C/W | Four-layer (2s2p), natural convection, JESD51-6 | 19 |
| Thermal resistance, junction to ambient, 200 ft./min. air speed, single-layer (1S) | RθJMA | | 62 | | °C/W | Single-layer (1S), 200 ft./min. air speed | 19 |
| Thermal resistance, junction to ambient, 200 ft./min. air speed, four-layer (2s2p) | RθJMA | | 47 | | °C/W | Four-layer (2s2p), 200 ft./min. air speed | 19 |
| Thermal resistance, junction to board | RθJB | | 34 | | °C/W | | 19 |
| Thermal resistance, junction to case | RθJC | | 20 | | °C/W | | 19 |
| Thermal characterization parameter, junction to package top | ΨJT | | 5 | | °C/W | Natural convection | 19 |
## CAD (KiCad official)
- Symbol: `MKE06Z64VLD4`
- Footprint: `Package_QFP:LQFP-44_10x10mm_P0.8mm`
- 3D model: LQFP-44(10x10) (KiCad packages3D, STEP)
- 3D model files: `mke06z64vld4-etched.step` / `mke06z64vld4-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mke06z64vld4.step` / `mke06z64vld4.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [NXP Semicon datasheet](https://www.nxp.com/docs/en/data-sheet/MKE06P80M48SF0.pdf) (39 pp, sha256 `73a145f536207087`, retrieved 2026-10-29, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mke06z64vld4-datasheet.pdf)