main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mke06z64vld4: viewers · Ray
mke06z64vld4-etched.glb Publish 0.1.0 · Ray
mke06z64vld4-etched.step mke06z64vld4: factory component page (tier=mfr) · Ray
mke06z64vld4-hero.glb mke06z64vld4: hero GLB from the etched model (keeps the MPN mark) · Ray
mke06z64vld4-hero.overlay.json Publish 0.1.0 · Ray
mke06z64vld4.glb Publish 0.1.0 · Ray
mke06z64vld4.kicad_mod Publish 0.1.0 · Ray
mke06z64vld4.kicad_sym Publish 0.1.0 · Ray
mke06z64vld4.lbr Publish 0.1.0 · Ray
mke06z64vld4.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

MKE06Z64VLD4

NXP Semicon · Pre-ordered MCUs · LQFP-44(10x10)

MKE06Z64VLD4 from NXP Semicon, in a LQFP-44(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PTD1 bidirectional Port D GPIO PTD1 (default function listed as DISABLED); the table lists alternates KBI0_P25, FTM2_CH3 and SPI1_MOSI, and PTD1 is a high-current drive pin when used as output.
2 PTD0 bidirectional Port D GPIO PTD0; the table lists alternates KBI0_P24, FTM2_CH2 and SPI1_SCK, and PTD0 is a high-current drive pin when used as output.
3 PTE7 bidirectional Port E GPIO PTE7; the table lists alternates KBI1_P7, TCLK2, FTM1_CH1 and CAN0_TX.
4 PTH2 bidirectional Port H GPIO PTH2; the table lists alternates KBI1_P26, BUSOUT, FTM1_CH0 and CAN0_RX.
5 VDD power_in Digital supply pin; the device operating voltage range is stated as 2.7 to 5.5 V.
6 VDDA power_in Analog supply pin; the datasheet notes VREFH and VDDA are internally connected only in 64-pin packages, so they are separate on this 44-pin package.
7 VREFL power_in Low reference voltage pin VREFL; no further limits are stated in this excerpt.
8 VSS/VSSA power_in Ground pin for digital and analog sections; the datasheet states VSS and VSSA are internally connected.
9 PTB7 bidirectional Default function is the oscillator input EXTAL, also usable as Port B GPIO PTB7 with alternates KBI0_P15 and I2C0_SCL.
10 PTB6 bidirectional Default function is the oscillator output XTAL, also usable as Port B GPIO PTB6 with alternates KBI0_P14 and I2C0_SDA.
11 PTI4 bidirectional Port I GPIO PTI4 with the IRQ external interrupt listed as its alternate function.
12 PTB5 bidirectional Port B GPIO PTB5; high-current drive pin when used as output, with alternates KBI0_P13, FTM2_CH5, SPI0_PCS and ACMP1_OUT.
13 PTB4 bidirectional Port B GPIO PTB4 with NMI_b as default function; high-current drive pin when used as output, with alternates KBI0_P12, FTM2_CH4, SPI0_MISO and ACMP1_IN2.
14 PTC3 bidirectional Port C GPIO PTC3 with ADC0_SE11 analog input; alternates KBI0_P19 and FTM2_CH3.
15 PTC2 bidirectional Port C GPIO PTC2 with ADC0_SE10 analog input; alternates KBI0_P18 and FTM2_CH2.
16 PTD7 bidirectional Port D GPIO PTD7; the table lists alternates KBI0_P31 and UART2_TX.
17 PTD6 bidirectional Port D GPIO PTD6; the table lists alternates KBI0_P30 and UART2_RX.
18 PTD5 bidirectional Port D GPIO PTD5; the table lists alternates KBI0_P29 and PWT_IN0.
19 PTC1 bidirectional Port C GPIO PTC1 with ADC0_SE9 analog input; alternates KBI0_P17 and FTM2_CH1.
20 PTC0 bidirectional Port C GPIO PTC0 with ADC0_SE8 analog input; alternates KBI0_P16 and FTM2_CH0.
21 PTB3 bidirectional Port B GPIO PTB3 with ADC0_SE7 analog input; alternates KBI0_P11, SPI0_MOSI and FTM0_CH1.
22 PTB2 bidirectional Port B GPIO PTB2 with ADC0_SE6 analog input; alternates KBI0_P10, SPI0_SCK and FTM0_CH0.
23 PTB1 bidirectional Port B GPIO PTB1 with ADC0_SE5 analog input; alternates KBI0_P9 and UART0_TX.
24 PTB0 bidirectional Port B GPIO PTB0 with ADC0_SE4 analog input; alternates KBI0_P8, UART0_RX and PWT_IN1.
25 PTA7 bidirectional Port A GPIO PTA7 with ADC0_SE3 analog input; alternates KBI0_P7, FTM2_FLT2 and ACMP1_IN1.
26 PTA6 bidirectional Port A GPIO PTA6 with ADC0_SE2 analog input; alternates KBI0_P6, FTM2_FLT1 and ACMP1_IN0.
27 VSS power_in Ground pin (VSS).
28 VDD power_in Digital supply pin; the device operating voltage range is stated as 2.7 to 5.5 V.
29 PTD4 bidirectional Port D GPIO PTD4; the table lists alternate KBI0_P28.
30 PTD3 bidirectional Port D GPIO PTD3; the table lists alternates KBI0_P27 and SPI1_PCS.
31 PTD2 bidirectional Port D GPIO PTD2; the table lists alternates KBI0_P26 and SPI1_MISO.
32 PTA3 bidirectional Port A GPIO PTA3, a true open-drain pin when operated as output; alternates KBI0_P3, UART0_TX and I2C0_SCL.
33 PTA2 bidirectional Port A GPIO PTA2, a true open-drain pin when operated as output; alternates KBI0_P2, UART0_RX and I2C0_SDA.
34 PTA1 bidirectional Port A GPIO PTA1 with ADC0_SE1 analog input; alternates KBI0_P1, FTM0_CH1, ACMP0_IN1 and an I2C0 SDA output signal (name split across lines in the extracted text).
35 PTA0 bidirectional Port A GPIO PTA0 with ADC0_SE0 analog input; alternates KBI0_P0, FTM0_CH0, ACMP0_IN0 and an I2C0 SCL output signal (name split across lines in the extracted text).
36 PTC7 bidirectional Port C GPIO PTC7; the table lists alternates KBI0_P23, UART1_TX and CAN0_TX.
37 PTC6 bidirectional Port C GPIO PTC6; the table lists alternates KBI0_P22, UART1_RX and CAN0_RX.
38 PTE2 bidirectional Port E GPIO PTE2; the table lists alternates KBI1_P2, SPI0_MISO and PWT_IN0.
39 PTE1 bidirectional Port E GPIO PTE1, a high-current drive pin when used as output; alternates KBI1_P1, SPI0_MOSI and I2C1_SCL.
40 PTE0 bidirectional Port E GPIO PTE0, a high-current drive pin when used as output; alternates KBI1_P0, SPI0_SCK, TCLK1 and I2C1_SDA.
41 PTC5 bidirectional Port C GPIO PTC5; the table lists alternates KBI0_P21, FTM1_CH1 and RTC_CLKOUT.
42 PTC4 bidirectional Default function is the serial wire debug clock SWD_CLK, also usable as Port C GPIO PTC4 with alternates KBI0_P20, RTC_CLKOUT, FTM1_CH0 and ACMP0_IN2.
43 PTA5 input Default function is the active-low reset input RESET_b, also usable as Port A GPIO PTA5 with alternates KBI0_P5, IRQ and TCLK0; no electrical limits for RESET_b are stated in this excerpt.
44 PTA4 bidirectional Default function is the serial wire debug data I/O SWD_DIO, also usable as Port A GPIO PTA4 with alternates KBI0_P4 and ACMP0_OUT.

Key specifications

Parameter Value
Manufacturer NXP Semicon
Package LQFP-44(10x10)
Category Embedded Processors & Controllers
Pins 44

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Digital supply voltage VDD -0.3 6 V 7
Maximum current into VDD IDD 120 mA 7
Input voltage of true open drain pins VIN -0.3 6 V True open drain pins (PTA2, PTA3) 7
Instantaneous maximum current single pin limit ID -25 25 mA Applies to all port pins 7
Storage temperature TSTG -55 150 °C 6
Solder temperature, lead-free TSDR 260 °C 6
Electrostatic discharge voltage, human body model VHBM -6000 6000 V 6
Electrostatic discharge voltage, charged-device model VCDM -500 500 V 6
Latch-up current at ambient temperature of 125°C ILAT -100 100 mA Ambient temperature 125 °C 6
Operating voltage 2.7 5.5 V 7
Ambient temperature TA -40 105 °C 18
Die junction temperature TJ -40 125 °C 18
Output high current, max total IOH for all ports IOHT -100 mA 5 V 8
Output high current, max total IOH for all ports IOHT -60 mA 3 V 8
Output low voltage, all I/O pins standard drive VOL 0.8 V All I/O pins, standard drive strength, 5 V, Iload = 5 mA 8
Output low voltage, high current drive pins high-drive strength VOL 0.8 V High current drive pins, high-drive strength, 5 V, Iload = 20 mA 8
Output low current, max total IOL for all ports IOLT 100 mA 5 V 8
Output low current, max total IOL for all ports IOLT 60 mA 3 V 8
Input leakage current /IIn/ 0.1 1 µA Per pin, pins in high impedance input mode, VIN = VDD or VSS 8
Total leakage combined for all port pins /IINTOT/ 2 µA Pins in high impedance input mode, VIN = VDD or VSS 8
Pullup resistors, all digital inputs RPU 30 50 kΩ All digital inputs when enabled (all I/O pins other than PTA2 and PTA3) 8
Pullup resistors, PTA2 and PTA3 pins RPU4 30 60 kΩ PTA2 and PTA3 pins 8
DC injection current, single pin limit IIC -2 2 mA Single pin limit, VIN < VSS or VIN > VDD 8
DC injection current, total MCU limit IIC -5 25 mA Total MCU limit, includes sum of all stressed pins 8
Input capacitance, all pins CIn 7 pF All pins 8
RAM retention voltage VRAM 2 V 8
POR re-arm voltage VPOR 1.5 1.75 2 V 9
Falling low-voltage detect threshold, high range VLVDH 4.2 4.3 4.4 V LVDV = 1 9
Falling low-voltage detect threshold, low range VLVDL 2.56 2.61 2.66 V LVDV = 0 9
Buffered bandgap output VBG 1.14 1.16 1.18 V Factory trimmed at VDD = 5.0 V, 25 °C 9
Run supply current, FBE mode, all clocks enabled, run from RAM, 24/24 MHz RIDD 9.8 14.9 mA VDD 5 V, -40 to 105 °C 14
Run supply current, FBE mode, all clocks enabled, run from RAM, 24/24 MHz RIDD 9.6 12.8 mA VDD 3 V, -40 to 105 °C 14
Run supply current, FBE mode, all clocks disabled and gated, run from RAM, 24/24 MHz RIDD 7.7 12.5 mA VDD 5 V, -40 to 105 °C 14
Run supply current, FBE mode, all clocks disabled and gated, run from RAM, 24/24 MHz RIDD 7.6 9.5 mA VDD 3 V, -40 to 105 °C 14
Wait mode current, FEI mode, all clocks enabled, 24/24 MHz WIDD 6.5 7.2 mA VDD 5 V, -40 to 105 °C 15
Wait mode current, FEI mode, all clocks enabled, 24/24 MHz WIDD 6.4 7 mA VDD 3 V, -40 to 105 °C 15
Stop mode supply current, no clocks active except 1 kHz LPO SIDD 2 105 µA VDD 5 V, -40 to 105 °C 15
Stop mode supply current, no clocks active except 1 kHz LPO SIDD 1.9 95 µA VDD 3 V, -40 to 105 °C 15
Absolute supply voltage, analog VDDA 2.7 5.5 V 25
Delta to VDD (VDD-VDDA) ΔVDDA -100 0 100 mV VDD-VDDA 25
ADC asynchronous clock source, high speed (ADLPC = 0) fADACK 2 3.3 5 MHz ADLPC = 0 26
ADC asynchronous clock source, low power (ADLPC = 1) fADACK 1.25 2 3.3 MHz ADLPC = 1 26
Analog comparator supply current (operation mode) IDDA 10 20 µA 27
Analog input offset voltage VAIO 40 mV 27
System and core clock frequency fSys 48 MHz Min printed as DC 16
Bus frequency fBus 24 MHz Min printed as DC; tcyc = 1/fBus 16
Crystal or resonator frequency, low range flo 31.25 32.768 39.0625 kHz RANGE = 0; -40 to 105 °C ambient 21
Crystal or resonator frequency, high range fhi 4 24 MHz RANGE = 1; -40 to 105 °C ambient 21
DCO output frequency range fdco 40 50 MHz FLL reference = fint_t, flo, or fhi/RDIV 22
Flash program/erase endurance nFLPE 10 100 k Cycles TL to TH = -40 °C to 105 °C 24
Data retention tD_ret 15 100 years Average junction temperature 85 °C after up to 10,000 program/erase cycles 24
Thermal resistance, junction to ambient, natural convection, single-layer (1S) RθJA 75 °C/W Single-layer (1S), natural convection, JESD51-2 19
Thermal resistance, junction to ambient, natural convection, four-layer (2s2p) RθJA 53 °C/W Four-layer (2s2p), natural convection, JESD51-6 19
Thermal resistance, junction to ambient, 200 ft./min. air speed, single-layer (1S) RθJMA 62 °C/W Single-layer (1S), 200 ft./min. air speed 19
Thermal resistance, junction to ambient, 200 ft./min. air speed, four-layer (2s2p) RθJMA 47 °C/W Four-layer (2s2p), 200 ft./min. air speed 19
Thermal resistance, junction to board RθJB 34 °C/W 19
Thermal resistance, junction to case RθJC 20 °C/W 19
Thermal characterization parameter, junction to package top ΨJT 5 °C/W Natural convection 19

CAD (KiCad official)

  • Symbol: MKE06Z64VLD4
  • Footprint: Package_QFP:LQFP-44_10x10mm_P0.8mm
  • 3D model: LQFP-44(10x10) (KiCad packages3D, STEP)
  • 3D model files: mke06z64vld4-etched.step / mke06z64vld4-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mke06z64vld4.step / mke06z64vld4.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NXP Semicon datasheet (39 pp, sha256 73a145f536207087, retrieved 2026-10-29, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF