main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mke06z128vld4: viewers · Ray
mke06z128vld4-etched.glb Publish 0.1.0 · Ray
mke06z128vld4-etched.step mke06z128vld4: factory component page (tier=mfr) · Ray
mke06z128vld4-hero.glb mke06z128vld4: hero GLB from the etched model (keeps the MPN mark) · Ray
mke06z128vld4-hero.overlay.json Publish 0.1.0 · Ray
mke06z128vld4.glb Publish 0.1.0 · Ray
mke06z128vld4.kicad_mod Publish 0.1.0 · Ray
mke06z128vld4.kicad_sym Publish 0.1.0 · Ray
mke06z128vld4.lbr Publish 0.1.0 · Ray
mke06z128vld4.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 44 pins · Ray

MKE06Z128VLD4

NXP Semicon · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-44(10x10)

MKE06Z128VLD4 from NXP Semicon, in a LQFP-44(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PTD1 bidirectional GPIO port D bit 1 (high-current drive as output), default disabled; alternates KBI0_P25, FTM2_CH3, SPI1_MOSI.
2 PTD0 bidirectional GPIO port D bit 0 (high-current drive as output), default disabled; alternates KBI0_P24, FTM2_CH2, SPI1_SCK.
3 PTE7 bidirectional GPIO port E bit 7, default disabled; alternates KBI1_P7, TCLK2, FTM1_CH1, CAN0_TX.
4 PTH2 bidirectional GPIO port H bit 2, default disabled; alternates KBI1_P26, BUSOUT, FTM1_CH0, CAN0_RX.
5 VDD power_in Digital power supply, 2.7 to 5.5 V operating voltage range.
6 VDDA power_in Analog power supply, also VREFH function (VREFH and VDDA are internally connected on this package family's smaller pin counts).
7 VREFL power_in ADC low voltage reference input.
8 VSS/VSSA power_in Ground and analog ground; VSS and VSSA are internally connected.
9 PTB7 bidirectional GPIO port B bit 7, default EXTAL oscillator input; alternates KBI0_P15, I2C0_SCL.
10 PTB6 bidirectional GPIO port B bit 6, default XTAL oscillator output; alternates KBI0_P14, I2C0_SDA.
11 PTI4 bidirectional GPIO port I bit 4, default disabled; alternate IRQ.
12 PTB5 bidirectional GPIO port B bit 5 (high-current drive as output), default disabled; alternates KBI0_P13, FTM2_CH5, SPI0_PCS, ACMP1_OUT.
13 PTB4 bidirectional GPIO port B bit 4 (high-current drive as output), default NMI_b; alternates KBI0_P12, FTM2_CH4, SPI0_MISO, ACMP1_IN2.
14 PTC3 bidirectional GPIO port C bit 3, default ADC0_SE11; alternates KBI0_P19, FTM2_CH3.
15 PTC2 bidirectional GPIO port C bit 2, default ADC0_SE10; alternates KBI0_P18, FTM2_CH2.
16 PTD7 bidirectional GPIO port D bit 7, default disabled; alternates KBI0_P31, UART2_TX.
17 PTD6 bidirectional GPIO port D bit 6, default disabled; alternates KBI0_P30, UART2_RX.
18 PTD5 bidirectional GPIO port D bit 5, default disabled; alternates KBI0_P29, PWT_IN0.
19 PTC1 bidirectional GPIO port C bit 1, default ADC0_SE9; alternates KBI0_P17, FTM2_CH1.
20 PTC0 bidirectional GPIO port C bit 0, default ADC0_SE8; alternates KBI0_P16, FTM2_CH0.
21 PTB3 bidirectional GPIO port B bit 3, default ADC0_SE7; alternates KBI0_P11, SPI0_MOSI, FTM0_CH1.
22 PTB2 bidirectional GPIO port B bit 2, default ADC0_SE6; alternates KBI0_P10, SPI0_SCK, FTM0_CH0.
23 PTB1 bidirectional GPIO port B bit 1, default ADC0_SE5; alternates KBI0_P9, UART0_TX.
24 PTB0 bidirectional GPIO port B bit 0, default ADC0_SE4; alternates KBI0_P8, UART0_RX, PWT_IN1.
25 PTA7 bidirectional GPIO port A bit 7, default ADC0_SE3; alternates KBI0_P7, FTM2_FLT2, ACMP1_IN1.
26 PTA6 bidirectional GPIO port A bit 6, default ADC0_SE2; alternates KBI0_P6, FTM2_FLT1, ACMP1_IN0.
27 VSS power_in Ground; VSS and VSSA are internally connected.
28 VDD power_in Digital power supply, 2.7 to 5.5 V operating voltage range.
29 PTD4 bidirectional GPIO port D bit 4, default disabled; alternate KBI0_P28.
30 PTD3 bidirectional GPIO port D bit 3, default disabled; alternates KBI0_P27, SPI1_PCS.
31 PTD2 bidirectional GPIO port D bit 2, default disabled; alternates KBI0_P26, SPI1_MISO.
32 PTA3 bidirectional GPIO port A bit 3 (true open-drain as output), default disabled; alternates KBI0_P3, UART0_TX, I2C0_SCL.
33 PTA2 bidirectional GPIO port A bit 2 (true open-drain as output), default disabled; alternates KBI0_P2, UART0_RX, I2C0_SDA.
34 PTA1 bidirectional GPIO port A bit 1, default ADC0_SE1; alternates KBI0_P1, FTM0_CH1, I2C0_4WSDAOUT, ACMP0_IN1.
35 PTA0 bidirectional GPIO port A bit 0, default ADC0_SE0; alternates KBI0_P0, FTM0_CH0, I2C0_4WSCLOUT, ACMP0_IN0.
36 PTC7 bidirectional GPIO port C bit 7, default disabled; alternates KBI0_P23, UART1_TX, CAN0_TX.
37 PTC6 bidirectional GPIO port C bit 6, default disabled; alternates KBI0_P22, UART1_RX, CAN0_RX.
38 PTE2 bidirectional GPIO port E bit 2, default disabled; alternates KBI1_P2, SPI0_MISO, PWT_IN0.
39 PTE1 bidirectional GPIO port E bit 1 (high-current drive as output), default disabled; alternates KBI1_P1, SPI0_MOSI, I2C1_SCL.
40 PTE0 bidirectional GPIO port E bit 0 (high-current drive as output), default disabled; alternates KBI1_P0, SPI0_SCK, TCLK1, I2C1_SDA.
41 PTC5 bidirectional GPIO port C bit 5, default disabled; alternates KBI0_P21, FTM1_CH1, RTC_CLKOUT.
42 PTC4 bidirectional GPIO port C bit 4, default SWD_CLK; alternates KBI0_P20, RTC_CLKOUT, FTM1_CH0, ACMP0_IN2.
43 PTA5 bidirectional GPIO port A bit 5, default RESET_b; alternates KBI0_P5, IRQ, TCLK0.
44 PTA4 bidirectional GPIO port A bit 4, default SWD_DIO; alternates KBI0_P4, ACMP0_OUT.

Key specifications

Parameter Value
Manufacturer NXP Semicon
Package LQFP-44(10x10)
Category Single Chip Microcomputer/Microcontroller
Pins 44

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Digital supply voltage VDD -0.3 6 V 7
Maximum current into VDD IDD 120 mA 7
Input voltage of true open drain pins VIN -0.3 6 V true open drain pins 7
Instantaneous maximum current single pin limit ID -25 25 mA applies to all port pins 7
Storage temperature TSTG -55 150 °C 6
Solder temperature, lead-free TSDR 260 °C 6
ESD voltage, human body model VHBM -6000 6000 V 6
ESD voltage, charged-device model VCDM -500 500 V 6
Latch-up current ILAT -100 100 mA ambient temperature of 125°C 6
Operating voltage 2.7 5.5 V 7
Die junction temperature TJ -40 125 °C 18
Ambient temperature TA -40 105 °C 18
Analog supply voltage (ADC) VDDA 2.7 5.5 V 25
System and core clock fSys 48 MHz DC to max 16
Bus frequency fBus 24 MHz DC to max 16
Internal low power oscillator frequency fLPO 0.67 1 1.25 KHz 16
Output low voltage, standard drive VOL 0.8 V 5 V, Iload = 5 mA 8
Output low voltage, high-drive strength VOL 0.8 V 5 V, Iload = 20 mA 8
Max total IOH for all ports IOHT -100 mA 5 V 8
Max total IOH for all ports IOHT -60 mA 3 V 8
Max total IOL for all ports IOLT 100 mA 5 V 8
Max total IOL for all ports IOLT 60 mA 3 V 8
Input leakage current per pin /IIn/ 0.1 1 µA VIN = VDD or VSS, high impedance input mode 8
Total leakage combined for all port pins /IINTOT/ 2 µA VIN = VDD or VSS, high impedance input mode 8
Pullup resistors, all digital inputs RPU 30 50 kΩ when enabled (all I/O pins other than PTA2 and PTA3) 8
Pullup resistors, PTA2 and PTA3 RPU 30 60 kΩ PTA2 and PTA3 pins 8
DC injection current, single pin IIC -2 2 mA VIN < VSS, VIN > VDD 8
DC injection current, total MCU IIC -5 25 mA includes sum of all stressed pins 8
Input capacitance, all pins CIn 7 pF 8
RAM retention voltage VRAM 2 V 8
POR re-arm voltage VPOR 1.5 1.75 2 V 9
Falling low-voltage detect threshold, high range VLVDH 4.2 4.3 4.4 V LVDV = 1 9
Falling low-voltage detect threshold, low range VLVDL 2.56 2.61 2.66 V LVDV = 0 9
Buffered bandgap output VBG 1.14 1.16 1.18 V Factory trimmed at VDD = 5.0 V, Temp = 25 °C 9
Run supply current FBE, clocks enabled, from RAM RIDD 9.8 14.9 mA 24/24 MHz, VDD 5 V, -40 to 105 °C 14
Run supply current FBE, clocks enabled, from RAM RIDD 9.6 12.8 mA 24/24 MHz, VDD 3 V, -40 to 105 °C 14
Wait mode current FEI, clocks enabled WIDD 6.5 7.2 mA 24/24 MHz, VDD 5 V, -40 to 105 °C 15
Stop mode supply current, no clocks active SIDD 2 105 µA VDD 5 V, -40 to 105 °C 15
Stop mode supply current, no clocks active SIDD 1.9 95 µA VDD 3 V, -40 to 105 °C 15
Internal reference clock frequency trim range fint_t 31.25 39.0625 kHz 22
DCO output frequency range fdco 40 50 MHz FLL reference = fint_t, flo, or fhi/RDIV 22
Factory trimmed internal oscillator accuracy Δfint_ft -0.5 0.5 % T = 25 °C, VDD = 5 V 22
Frequency accuracy of DCO output using factory trim Δfdco_ft -1.5 1 % Over temperature range from -40 °C to 105°C 22
FLL acquisition time tAcquire 2 ms 23
Long term jitter of DCO output clock CJitter 0.02 0.2 %fdco averaged over 2 ms interval 23
Supply voltage for program/erase Vprog/erase 2.7 5.5 V -40 °C to 105 °C 23
Data retention tD_ret 15 100 years TJavg = 85°C after up to 10,000 program/erase cycles 24
ADC supply current IDDA 582 990 µA ADLPC = 0, ADLSMP = 0, ADCO = 1 26
ADC input resistance RADIN 3 5 kΩ 25
ADC conversion clock frequency, high speed fADCK 0.4 8 MHz ADLPC=0 25
ACMP supply current (operation mode) IDDA 10 20 µA 27
ACMP analog input offset voltage VAIO 40 mV 27
Thermal resistance, junction to ambient, 1S board RθJA 75 °C/W 44 LQFP, single-layer (1S), natural convection 19
Thermal resistance, junction to ambient, 2s2p board RθJA 53 °C/W 44 LQFP, four-layer (2s2p), natural convection 19
Thermal resistance, junction to ambient, 1S, 200 ft/min RθJMA 62 °C/W 44 LQFP, single-layer (1S), 200 ft./min. air speed 19
Thermal resistance, junction to ambient, 2s2p, 200 ft/min RθJMA 47 °C/W 44 LQFP, four-layer (2s2p), 200 ft./min. air speed 19
Thermal resistance, junction to board RθJB 34 °C/W 44 LQFP 19
Thermal resistance, junction to case RθJC 20 °C/W 44 LQFP 19

CAD (KiCad official)

  • Symbol: MKE06Z128VLD4
  • Footprint: Package_QFP:LQFP-44_10x10mm_P0.8mm
  • 3D model: LQFP-44(10x10) (KiCad packages3D, STEP)
  • 3D model files: mke06z128vld4-etched.step / mke06z128vld4-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mke06z128vld4.step / mke06z128vld4.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NXP Semicon datasheet (39 pp, sha256 73a145f536207087, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF