3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMKE06Z128VLD4
NXP Semicon · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-44(10x10)
MKE06Z128VLD4 from NXP Semicon, in a LQFP-44(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PTD1 | bidirectional | GPIO port D bit 1 (high-current drive as output), default disabled; alternates KBI0_P25, FTM2_CH3, SPI1_MOSI. |
| 2 | PTD0 | bidirectional | GPIO port D bit 0 (high-current drive as output), default disabled; alternates KBI0_P24, FTM2_CH2, SPI1_SCK. |
| 3 | PTE7 | bidirectional | GPIO port E bit 7, default disabled; alternates KBI1_P7, TCLK2, FTM1_CH1, CAN0_TX. |
| 4 | PTH2 | bidirectional | GPIO port H bit 2, default disabled; alternates KBI1_P26, BUSOUT, FTM1_CH0, CAN0_RX. |
| 5 | VDD | power_in | Digital power supply, 2.7 to 5.5 V operating voltage range. |
| 6 | VDDA | power_in | Analog power supply, also VREFH function (VREFH and VDDA are internally connected on this package family's smaller pin counts). |
| 7 | VREFL | power_in | ADC low voltage reference input. |
| 8 | VSS/VSSA | power_in | Ground and analog ground; VSS and VSSA are internally connected. |
| 9 | PTB7 | bidirectional | GPIO port B bit 7, default EXTAL oscillator input; alternates KBI0_P15, I2C0_SCL. |
| 10 | PTB6 | bidirectional | GPIO port B bit 6, default XTAL oscillator output; alternates KBI0_P14, I2C0_SDA. |
| 11 | PTI4 | bidirectional | GPIO port I bit 4, default disabled; alternate IRQ. |
| 12 | PTB5 | bidirectional | GPIO port B bit 5 (high-current drive as output), default disabled; alternates KBI0_P13, FTM2_CH5, SPI0_PCS, ACMP1_OUT. |
| 13 | PTB4 | bidirectional | GPIO port B bit 4 (high-current drive as output), default NMI_b; alternates KBI0_P12, FTM2_CH4, SPI0_MISO, ACMP1_IN2. |
| 14 | PTC3 | bidirectional | GPIO port C bit 3, default ADC0_SE11; alternates KBI0_P19, FTM2_CH3. |
| 15 | PTC2 | bidirectional | GPIO port C bit 2, default ADC0_SE10; alternates KBI0_P18, FTM2_CH2. |
| 16 | PTD7 | bidirectional | GPIO port D bit 7, default disabled; alternates KBI0_P31, UART2_TX. |
| 17 | PTD6 | bidirectional | GPIO port D bit 6, default disabled; alternates KBI0_P30, UART2_RX. |
| 18 | PTD5 | bidirectional | GPIO port D bit 5, default disabled; alternates KBI0_P29, PWT_IN0. |
| 19 | PTC1 | bidirectional | GPIO port C bit 1, default ADC0_SE9; alternates KBI0_P17, FTM2_CH1. |
| 20 | PTC0 | bidirectional | GPIO port C bit 0, default ADC0_SE8; alternates KBI0_P16, FTM2_CH0. |
| 21 | PTB3 | bidirectional | GPIO port B bit 3, default ADC0_SE7; alternates KBI0_P11, SPI0_MOSI, FTM0_CH1. |
| 22 | PTB2 | bidirectional | GPIO port B bit 2, default ADC0_SE6; alternates KBI0_P10, SPI0_SCK, FTM0_CH0. |
| 23 | PTB1 | bidirectional | GPIO port B bit 1, default ADC0_SE5; alternates KBI0_P9, UART0_TX. |
| 24 | PTB0 | bidirectional | GPIO port B bit 0, default ADC0_SE4; alternates KBI0_P8, UART0_RX, PWT_IN1. |
| 25 | PTA7 | bidirectional | GPIO port A bit 7, default ADC0_SE3; alternates KBI0_P7, FTM2_FLT2, ACMP1_IN1. |
| 26 | PTA6 | bidirectional | GPIO port A bit 6, default ADC0_SE2; alternates KBI0_P6, FTM2_FLT1, ACMP1_IN0. |
| 27 | VSS | power_in | Ground; VSS and VSSA are internally connected. |
| 28 | VDD | power_in | Digital power supply, 2.7 to 5.5 V operating voltage range. |
| 29 | PTD4 | bidirectional | GPIO port D bit 4, default disabled; alternate KBI0_P28. |
| 30 | PTD3 | bidirectional | GPIO port D bit 3, default disabled; alternates KBI0_P27, SPI1_PCS. |
| 31 | PTD2 | bidirectional | GPIO port D bit 2, default disabled; alternates KBI0_P26, SPI1_MISO. |
| 32 | PTA3 | bidirectional | GPIO port A bit 3 (true open-drain as output), default disabled; alternates KBI0_P3, UART0_TX, I2C0_SCL. |
| 33 | PTA2 | bidirectional | GPIO port A bit 2 (true open-drain as output), default disabled; alternates KBI0_P2, UART0_RX, I2C0_SDA. |
| 34 | PTA1 | bidirectional | GPIO port A bit 1, default ADC0_SE1; alternates KBI0_P1, FTM0_CH1, I2C0_4WSDAOUT, ACMP0_IN1. |
| 35 | PTA0 | bidirectional | GPIO port A bit 0, default ADC0_SE0; alternates KBI0_P0, FTM0_CH0, I2C0_4WSCLOUT, ACMP0_IN0. |
| 36 | PTC7 | bidirectional | GPIO port C bit 7, default disabled; alternates KBI0_P23, UART1_TX, CAN0_TX. |
| 37 | PTC6 | bidirectional | GPIO port C bit 6, default disabled; alternates KBI0_P22, UART1_RX, CAN0_RX. |
| 38 | PTE2 | bidirectional | GPIO port E bit 2, default disabled; alternates KBI1_P2, SPI0_MISO, PWT_IN0. |
| 39 | PTE1 | bidirectional | GPIO port E bit 1 (high-current drive as output), default disabled; alternates KBI1_P1, SPI0_MOSI, I2C1_SCL. |
| 40 | PTE0 | bidirectional | GPIO port E bit 0 (high-current drive as output), default disabled; alternates KBI1_P0, SPI0_SCK, TCLK1, I2C1_SDA. |
| 41 | PTC5 | bidirectional | GPIO port C bit 5, default disabled; alternates KBI0_P21, FTM1_CH1, RTC_CLKOUT. |
| 42 | PTC4 | bidirectional | GPIO port C bit 4, default SWD_CLK; alternates KBI0_P20, RTC_CLKOUT, FTM1_CH0, ACMP0_IN2. |
| 43 | PTA5 | bidirectional | GPIO port A bit 5, default RESET_b; alternates KBI0_P5, IRQ, TCLK0. |
| 44 | PTA4 | bidirectional | GPIO port A bit 4, default SWD_DIO; alternates KBI0_P4, ACMP0_OUT. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | LQFP-44(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 44 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Digital supply voltage | VDD | -0.3 | 6 | V | 7 | ||
| Maximum current into VDD | IDD | 120 | mA | 7 | |||
| Input voltage of true open drain pins | VIN | -0.3 | 6 | V | true open drain pins | 7 | |
| Instantaneous maximum current single pin limit | ID | -25 | 25 | mA | applies to all port pins | 7 | |
| Storage temperature | TSTG | -55 | 150 | °C | 6 | ||
| Solder temperature, lead-free | TSDR | 260 | °C | 6 | |||
| ESD voltage, human body model | VHBM | -6000 | 6000 | V | 6 | ||
| ESD voltage, charged-device model | VCDM | -500 | 500 | V | 6 | ||
| Latch-up current | ILAT | -100 | 100 | mA | ambient temperature of 125°C | 6 | |
| Operating voltage | 2.7 | 5.5 | V | 7 | |||
| Die junction temperature | TJ | -40 | 125 | °C | 18 | ||
| Ambient temperature | TA | -40 | 105 | °C | 18 | ||
| Analog supply voltage (ADC) | VDDA | 2.7 | 5.5 | V | 25 | ||
| System and core clock | fSys | 48 | MHz | DC to max | 16 | ||
| Bus frequency | fBus | 24 | MHz | DC to max | 16 | ||
| Internal low power oscillator frequency | fLPO | 0.67 | 1 | 1.25 | KHz | 16 | |
| Output low voltage, standard drive | VOL | 0.8 | V | 5 V, Iload = 5 mA | 8 | ||
| Output low voltage, high-drive strength | VOL | 0.8 | V | 5 V, Iload = 20 mA | 8 | ||
| Max total IOH for all ports | IOHT | -100 | mA | 5 V | 8 | ||
| Max total IOH for all ports | IOHT | -60 | mA | 3 V | 8 | ||
| Max total IOL for all ports | IOLT | 100 | mA | 5 V | 8 | ||
| Max total IOL for all ports | IOLT | 60 | mA | 3 V | 8 | ||
| Input leakage current per pin | /IIn/ | 0.1 | 1 | µA | VIN = VDD or VSS, high impedance input mode | 8 | |
| Total leakage combined for all port pins | /IINTOT/ | 2 | µA | VIN = VDD or VSS, high impedance input mode | 8 | ||
| Pullup resistors, all digital inputs | RPU | 30 | 50 | kΩ | when enabled (all I/O pins other than PTA2 and PTA3) | 8 | |
| Pullup resistors, PTA2 and PTA3 | RPU | 30 | 60 | kΩ | PTA2 and PTA3 pins | 8 | |
| DC injection current, single pin | IIC | -2 | 2 | mA | VIN < VSS, VIN > VDD | 8 | |
| DC injection current, total MCU | IIC | -5 | 25 | mA | includes sum of all stressed pins | 8 | |
| Input capacitance, all pins | CIn | 7 | pF | 8 | |||
| RAM retention voltage | VRAM | 2 | V | 8 | |||
| POR re-arm voltage | VPOR | 1.5 | 1.75 | 2 | V | 9 | |
| Falling low-voltage detect threshold, high range | VLVDH | 4.2 | 4.3 | 4.4 | V | LVDV = 1 | 9 |
| Falling low-voltage detect threshold, low range | VLVDL | 2.56 | 2.61 | 2.66 | V | LVDV = 0 | 9 |
| Buffered bandgap output | VBG | 1.14 | 1.16 | 1.18 | V | Factory trimmed at VDD = 5.0 V, Temp = 25 °C | 9 |
| Run supply current FBE, clocks enabled, from RAM | RIDD | 9.8 | 14.9 | mA | 24/24 MHz, VDD 5 V, -40 to 105 °C | 14 | |
| Run supply current FBE, clocks enabled, from RAM | RIDD | 9.6 | 12.8 | mA | 24/24 MHz, VDD 3 V, -40 to 105 °C | 14 | |
| Wait mode current FEI, clocks enabled | WIDD | 6.5 | 7.2 | mA | 24/24 MHz, VDD 5 V, -40 to 105 °C | 15 | |
| Stop mode supply current, no clocks active | SIDD | 2 | 105 | µA | VDD 5 V, -40 to 105 °C | 15 | |
| Stop mode supply current, no clocks active | SIDD | 1.9 | 95 | µA | VDD 3 V, -40 to 105 °C | 15 | |
| Internal reference clock frequency trim range | fint_t | 31.25 | 39.0625 | kHz | 22 | ||
| DCO output frequency range | fdco | 40 | 50 | MHz | FLL reference = fint_t, flo, or fhi/RDIV | 22 | |
| Factory trimmed internal oscillator accuracy | Δfint_ft | -0.5 | 0.5 | % | T = 25 °C, VDD = 5 V | 22 | |
| Frequency accuracy of DCO output using factory trim | Δfdco_ft | -1.5 | 1 | % | Over temperature range from -40 °C to 105°C | 22 | |
| FLL acquisition time | tAcquire | 2 | ms | 23 | |||
| Long term jitter of DCO output clock | CJitter | 0.02 | 0.2 | %fdco | averaged over 2 ms interval | 23 | |
| Supply voltage for program/erase | Vprog/erase | 2.7 | 5.5 | V | -40 °C to 105 °C | 23 | |
| Data retention | tD_ret | 15 | 100 | years | TJavg = 85°C after up to 10,000 program/erase cycles | 24 | |
| ADC supply current | IDDA | 582 | 990 | µA | ADLPC = 0, ADLSMP = 0, ADCO = 1 | 26 | |
| ADC input resistance | RADIN | 3 | 5 | kΩ | 25 | ||
| ADC conversion clock frequency, high speed | fADCK | 0.4 | 8 | MHz | ADLPC=0 | 25 | |
| ACMP supply current (operation mode) | IDDA | 10 | 20 | µA | 27 | ||
| ACMP analog input offset voltage | VAIO | 40 | mV | 27 | |||
| Thermal resistance, junction to ambient, 1S board | RθJA | 75 | °C/W | 44 LQFP, single-layer (1S), natural convection | 19 | ||
| Thermal resistance, junction to ambient, 2s2p board | RθJA | 53 | °C/W | 44 LQFP, four-layer (2s2p), natural convection | 19 | ||
| Thermal resistance, junction to ambient, 1S, 200 ft/min | RθJMA | 62 | °C/W | 44 LQFP, single-layer (1S), 200 ft./min. air speed | 19 | ||
| Thermal resistance, junction to ambient, 2s2p, 200 ft/min | RθJMA | 47 | °C/W | 44 LQFP, four-layer (2s2p), 200 ft./min. air speed | 19 | ||
| Thermal resistance, junction to board | RθJB | 34 | °C/W | 44 LQFP | 19 | ||
| Thermal resistance, junction to case | RθJC | 20 | °C/W | 44 LQFP | 19 |
CAD (KiCad official)
- Symbol:
MKE06Z128VLD4 - Footprint:
Package_QFP:LQFP-44_10x10mm_P0.8mm - 3D model: LQFP-44(10x10) (KiCad packages3D, STEP)
- 3D model files:
mke06z128vld4-etched.step/mke06z128vld4-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mke06z128vld4.step/mke06z128vld4.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (39 pp, sha256
73a145f536207087, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).