main
History Download
Ray Publish 0.1.0 19b9cff

MKE02Z32VLD4

NXP Semicon · NXP MCU · LQFP-44(10x10)

MKE02Z32VLD4 from NXP Semicon, in a LQFP-44(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PTD1 bidirectional GPIO port D bit 1 with KBI1_P1, FTM2_CH3 and SPI1_MOSI alternate functions, and high-current drive when operated as output.
2 PTD0 bidirectional GPIO port D bit 0 with KBI1_P0, FTM2_CH2 and SPI1_SCK alternate functions, and high-current drive when operated as output.
3 PTE7 bidirectional GPIO port E bit 7 with FTM2_CLK and FTM1_CH1 alternate functions.
4 PTH2 bidirectional GPIO port H bit 2 with BUSOUT and FTM1_CH0 alternate functions.
5 VDD power_in Positive supply input, with the device operating voltage range stated as 2.7 to 5.5 V.
6 VDDA/VREFH power_in Analog supply (VDDA) and ADC high voltage reference (VREFH), which are internally connected.
7 VREFL power_in ADC low voltage reference input.
8 VSSA/VSS power_in Analog ground (VSSA) and ground (VSS), which are internally connected.
9 PTB7 bidirectional GPIO port B bit 7 with I2C0_SCL alternate function and EXTAL oscillator input at highest priority.
10 PTB6 bidirectional GPIO port B bit 6 with I2C0_SDA alternate function and XTAL oscillator output at highest priority.
11 VSS power_in Ground supply pin.
12 PTB5 bidirectional GPIO port B bit 5 with FTM2_CH5, SPI0_PCS0 and ACMP1_OUT alternate functions, and high-current drive when operated as output.
13 PTB4 bidirectional GPIO port B bit 4 with FTM2_CH4, SPI0_MISO, NMI and ACMP1_IN2 alternate functions, and high-current drive when operated as output.
14 PTC3 bidirectional GPIO port C bit 3 with FTM2_CH3 and ADC0_SE11 alternate functions.
15 PTC2 bidirectional GPIO port C bit 2 with FTM2_CH2 and ADC0_SE10 alternate functions.
16 PTD7 bidirectional GPIO port D bit 7 with KBI1_P7 and UART2_TX alternate functions.
17 PTD6 bidirectional GPIO port D bit 6 with KBI1_P6 and UART2_RX alternate functions.
18 PTD5 bidirectional GPIO port D bit 5 with KBI1_P5 alternate function.
19 PTC1 bidirectional GPIO port C bit 1 with FTM2_CH1 and ADC0_SE9 alternate functions.
20 PTC0 bidirectional GPIO port C bit 0 with FTM2_CH0 and ADC0_SE8 alternate functions.
21 PTB3 bidirectional GPIO port B bit 3 with KBI0_P7, SPI0_MOSI, FTM0_CH1 and ADC0_SE7 alternate functions.
22 PTB2 bidirectional GPIO port B bit 2 with KBI0_P6, SPI0_SCK, FTM0_CH0 and ADC0_SE6 alternate functions.
23 PTB1 bidirectional GPIO port B bit 1 with KBI0_P5, UART0_TX and ADC0_SE5 alternate functions.
24 PTB0 bidirectional GPIO port B bit 0 with KBI0_P4, UART0_RX and ADC0_SE4 alternate functions.
25 PTA7 bidirectional GPIO port A bit 7 with FTM2_FLT2, ACMP1_IN1 and ADC0_SE3 alternate functions.
26 PTA6 bidirectional GPIO port A bit 6 with FTM2_FLT1, ACMP1_IN0 and ADC0_SE2 alternate functions.
27 VSS power_in Ground supply pin.
28 VDD power_in Positive supply input, with the device operating voltage range stated as 2.7 to 5.5 V.
29 PTD4 bidirectional GPIO port D bit 4 with KBI1_P4 alternate function.
30 PTD3 bidirectional GPIO port D bit 3 with KBI1_P3 and SPI1_PCS0 alternate functions.
31 PTD2 bidirectional GPIO port D bit 2 with KBI1_P2 and SPI1_MISO alternate functions.
32 PTA3 bidirectional GPIO port A bit 3 with KBI0_P3, UART0_TX and I2C0_SCL alternate functions, and a true open-drain output when operated as output.
33 PTA2 bidirectional GPIO port A bit 2 with KBI0_P2, UART0_RX and I2C0_SDA alternate functions, and a true open-drain output when operated as output.
34 PTA1 bidirectional GPIO port A bit 1 with KBI0_P1, FTM0_CH1, ACMP0_IN1 and ADC0_SE1 alternate functions.
35 PTA0 bidirectional GPIO port A bit 0 with KBI0_P0, FTM0_CH0, ACMP0_IN0 and ADC0_SE0 alternate functions.
36 PTC7 bidirectional GPIO port C bit 7 with UART1_TX alternate function.
37 PTC6 bidirectional GPIO port C bit 6 with UART1_RX alternate function.
38 PTE2 bidirectional GPIO port E bit 2 with SPI0_MISO alternate function.
39 PTE1 bidirectional GPIO port E bit 1 with SPI0_MOSI alternate function, and high-current drive when operated as output.
40 PTE0 bidirectional GPIO port E bit 0 with SPI0_SCK and FTM1_CLK alternate functions, and high-current drive when operated as output.
41 PTC5 bidirectional GPIO port C bit 5 with FTM1_CH1 and RTCO alternate functions.
42 PTC4 bidirectional GPIO port C bit 4 with RTCO, FTM1_CH0, ACMP0_IN2 and SWD_CLK alternate functions.
43 PTA5 bidirectional GPIO port A bit 5 with IRQ and FTM0_CLK alternate functions and RESET at highest priority.
44 PTA4 bidirectional GPIO port A bit 4 with ACMP0_OUT alternate function and SWD_DIO at highest priority.

Key specifications

Parameter Value
Manufacturer NXP Semicon
Package LQFP-44(10x10)
Category Embedded Processors & Controllers
Pins 44

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating voltage 2.7 5.5 V 7
Digital supply voltage VDD -0.3 6 V 7
Maximum current into VDD IDD 120 mA 7
Input voltage except true open drain pins VIN -0.3 V Maximum printed as VDD + 0.3 V 7
Input voltage of true open drain pins VIN -0.3 6 V True open drain pins 7
Instantaneous maximum current single pin limit ID -25 25 mA Applies to all port pins 7
Storage temperature TSTG -55 150 °C 6
Solder temperature, lead-free TSDR 260 °C Lead-free solder 6
Electrostatic discharge voltage, human body model VHBM -6000 6000 V JEDEC JESD22-A114 HBM 6
Electrostatic discharge voltage, charged-device model VCDM -500 500 V JEDEC JESD22-C101 6
Latch-up current at ambient temperature of 125°C ILAT -100 100 mA Test at 125 °C case temperature 6
Die junction temperature TJ -40 125 °C 18
Ambient temperature TA -40 105 °C Maximum TA can be exceeded only if TJ does not exceed maximum TJ 18
Total max IOH for all ports IOHT -100 mA 5 V 8
Total max IOH for all ports IOHT -60 mA 3 V 8
Total max IOL for all ports IOLT 100 mA 5 V 8
Total max IOL for all ports IOLT 60 mA 3 V 8
Output low voltage, standard-drive strength VOL 0.8 V All I/O pins, 5 V, Iload = 5 mA 8
Output low voltage, high-drive strength VOL 0.8 V High current drive pins, 5 V, Iload = 20 mA 8
Pullup resistors RPU 30 50 kΩ All digital inputs when enabled, all I/O pins other than PTA2 and PTA3 8
Pullup resistors RPU 30 60 kΩ PTA2 and PTA3 pins 8
DC injection current, single pin limit IIC -2 2 mA VIN < VSS, VIN > VDD 8
DC injection current, total MCU limit IIC -5 25 mA Includes sum of all stressed pins 8
Input leakage current per pin /IIn/ 0.1 1 µA Pins in high impedance input mode, VIN = VDD or VSS 8
Total leakage for all port pins /IINTOT/ 2 µA Pins in high impedance input mode, VIN = VDD or VSS 8
Input capacitance, all pins CIn 7 pF 8
RAM retention voltage VRAM 2 V 8
POR re-arm voltage VPOR 1.5 1.75 2 V Maximum is highest voltage that POR is guaranteed 9
Falling low-voltage detect threshold, high range VLVDH 4.2 4.3 4.4 V LVDV = 1 9
Falling low-voltage warning threshold, high range Level 1 VLVW1H 4.3 4.4 4.5 V LVWV = 00 9
Falling low-voltage warning threshold, high range Level 2 VLVW2H 4.5 4.5 4.6 V LVWV = 01 9
Falling low-voltage warning threshold, high range Level 3 VLVW3H 4.6 4.6 4.7 V LVWV = 10 9
Falling low-voltage warning threshold, high range Level 4 VLVW4H 4.7 4.7 4.8 V LVWV = 11 9
High range low-voltage detect/warning hysteresis VHYSH 100 mV 9
Falling low-voltage detect threshold, low range VLVDL 2.56 2.61 2.66 V LVDV = 0 9
Falling low-voltage warning threshold, low range Level 1 VLVW1L 2.62 2.7 2.78 V LVWV = 00 9
Falling low-voltage warning threshold, low range Level 2 VLVW2L 2.72 2.8 2.88 V LVWV = 01 9
Falling low-voltage warning threshold, low range Level 3 VLVW3L 2.82 2.9 2.98 V LVWV = 10 9
Falling low-voltage warning threshold, low range Level 4 VLVW4L 2.92 3 3.08 V LVWV = 11 9
Low range low-voltage detect hysteresis VHYSDL 40 mV 9
Low range low-voltage warning hysteresis VHYSWL 80 mV 9
Buffered bandgap output VBG 1.14 1.16 1.18 V Factory trimmed at VDD = 5.0 V, Temp = 25 °C 9
Stop mode supply current SIDD 2 85 µA No clocks active except 1 kHz LPO clock; VDD = 5 V; -40 to 105 °C 14
Stop mode supply current SIDD 1.9 80 µA No clocks active except 1 kHz LPO clock; VDD = 3 V; -40 to 105 °C 14
Supply voltage for program/erase Vprog/erase 2.7 5.5 V -40 °C to 105 °C 23
Supply voltage for read operation VRead 2.7 5.5 V 24
Internal low power oscillator frequency fLPO 0.67 1 1.25 KHz 16
Supply voltage ADC absolute VDDA 2.7 5.5 V 5 V 12-bit ADC operating conditions 25
Comparator supply voltage VDDA 2.7 5.5 V Analog comparator (ACMP) 28
Crystal or resonator frequency high range fhi 4 20 MHz RANGE = 1 21
Crystal or resonator frequency low range flo 31.25 32.768 39.0625 kHz RANGE = 0 21
DCO output frequency range fdco 32 40 MHz FLL reference = fint_t, flo, or fhi/RDIV 22
Thermal resistance, junction to ambient, single-layer (1S), natural convection RθJA 75 °C/W 44 LQFP, per JESD51-2 19
Thermal resistance, junction to ambient, four-layer (2s2p), natural convection RθJA 53 °C/W 44 LQFP, per JESD51-6 19
Thermal resistance, junction to board RθJB 34 °C/W 44 LQFP, per JESD51-8 19
Thermal resistance, junction to case RθJC 20 °C/W 44 LQFP 19
Thermal characterization parameter, junction to package top ΨJT 5 °C/W 44 LQFP, natural convection 19

CAD (KiCad official)

  • Symbol: MKE02Z32VLD4
  • Footprint: Package_QFP:LQFP-44_10x10mm_P0.8mm
  • 3D model: LQFP-44(10x10) (KiCad packages3D, STEP)
  • 3D model files: mke02z32vld4-etched.step / mke02z32vld4-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mke02z32vld4.step / mke02z32vld4.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NXP Semicon datasheet (37 pp, sha256 dd3ab7b95cbae8e4, retrieved 2026-11-21)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF