3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMKE02Z32VLD4
NXP Semicon · NXP MCU · LQFP-44(10x10)
MKE02Z32VLD4 from NXP Semicon, in a LQFP-44(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PTD1 | bidirectional | GPIO port D bit 1 with KBI1_P1, FTM2_CH3 and SPI1_MOSI alternate functions, and high-current drive when operated as output. |
| 2 | PTD0 | bidirectional | GPIO port D bit 0 with KBI1_P0, FTM2_CH2 and SPI1_SCK alternate functions, and high-current drive when operated as output. |
| 3 | PTE7 | bidirectional | GPIO port E bit 7 with FTM2_CLK and FTM1_CH1 alternate functions. |
| 4 | PTH2 | bidirectional | GPIO port H bit 2 with BUSOUT and FTM1_CH0 alternate functions. |
| 5 | VDD | power_in | Positive supply input, with the device operating voltage range stated as 2.7 to 5.5 V. |
| 6 | VDDA/VREFH | power_in | Analog supply (VDDA) and ADC high voltage reference (VREFH), which are internally connected. |
| 7 | VREFL | power_in | ADC low voltage reference input. |
| 8 | VSSA/VSS | power_in | Analog ground (VSSA) and ground (VSS), which are internally connected. |
| 9 | PTB7 | bidirectional | GPIO port B bit 7 with I2C0_SCL alternate function and EXTAL oscillator input at highest priority. |
| 10 | PTB6 | bidirectional | GPIO port B bit 6 with I2C0_SDA alternate function and XTAL oscillator output at highest priority. |
| 11 | VSS | power_in | Ground supply pin. |
| 12 | PTB5 | bidirectional | GPIO port B bit 5 with FTM2_CH5, SPI0_PCS0 and ACMP1_OUT alternate functions, and high-current drive when operated as output. |
| 13 | PTB4 | bidirectional | GPIO port B bit 4 with FTM2_CH4, SPI0_MISO, NMI and ACMP1_IN2 alternate functions, and high-current drive when operated as output. |
| 14 | PTC3 | bidirectional | GPIO port C bit 3 with FTM2_CH3 and ADC0_SE11 alternate functions. |
| 15 | PTC2 | bidirectional | GPIO port C bit 2 with FTM2_CH2 and ADC0_SE10 alternate functions. |
| 16 | PTD7 | bidirectional | GPIO port D bit 7 with KBI1_P7 and UART2_TX alternate functions. |
| 17 | PTD6 | bidirectional | GPIO port D bit 6 with KBI1_P6 and UART2_RX alternate functions. |
| 18 | PTD5 | bidirectional | GPIO port D bit 5 with KBI1_P5 alternate function. |
| 19 | PTC1 | bidirectional | GPIO port C bit 1 with FTM2_CH1 and ADC0_SE9 alternate functions. |
| 20 | PTC0 | bidirectional | GPIO port C bit 0 with FTM2_CH0 and ADC0_SE8 alternate functions. |
| 21 | PTB3 | bidirectional | GPIO port B bit 3 with KBI0_P7, SPI0_MOSI, FTM0_CH1 and ADC0_SE7 alternate functions. |
| 22 | PTB2 | bidirectional | GPIO port B bit 2 with KBI0_P6, SPI0_SCK, FTM0_CH0 and ADC0_SE6 alternate functions. |
| 23 | PTB1 | bidirectional | GPIO port B bit 1 with KBI0_P5, UART0_TX and ADC0_SE5 alternate functions. |
| 24 | PTB0 | bidirectional | GPIO port B bit 0 with KBI0_P4, UART0_RX and ADC0_SE4 alternate functions. |
| 25 | PTA7 | bidirectional | GPIO port A bit 7 with FTM2_FLT2, ACMP1_IN1 and ADC0_SE3 alternate functions. |
| 26 | PTA6 | bidirectional | GPIO port A bit 6 with FTM2_FLT1, ACMP1_IN0 and ADC0_SE2 alternate functions. |
| 27 | VSS | power_in | Ground supply pin. |
| 28 | VDD | power_in | Positive supply input, with the device operating voltage range stated as 2.7 to 5.5 V. |
| 29 | PTD4 | bidirectional | GPIO port D bit 4 with KBI1_P4 alternate function. |
| 30 | PTD3 | bidirectional | GPIO port D bit 3 with KBI1_P3 and SPI1_PCS0 alternate functions. |
| 31 | PTD2 | bidirectional | GPIO port D bit 2 with KBI1_P2 and SPI1_MISO alternate functions. |
| 32 | PTA3 | bidirectional | GPIO port A bit 3 with KBI0_P3, UART0_TX and I2C0_SCL alternate functions, and a true open-drain output when operated as output. |
| 33 | PTA2 | bidirectional | GPIO port A bit 2 with KBI0_P2, UART0_RX and I2C0_SDA alternate functions, and a true open-drain output when operated as output. |
| 34 | PTA1 | bidirectional | GPIO port A bit 1 with KBI0_P1, FTM0_CH1, ACMP0_IN1 and ADC0_SE1 alternate functions. |
| 35 | PTA0 | bidirectional | GPIO port A bit 0 with KBI0_P0, FTM0_CH0, ACMP0_IN0 and ADC0_SE0 alternate functions. |
| 36 | PTC7 | bidirectional | GPIO port C bit 7 with UART1_TX alternate function. |
| 37 | PTC6 | bidirectional | GPIO port C bit 6 with UART1_RX alternate function. |
| 38 | PTE2 | bidirectional | GPIO port E bit 2 with SPI0_MISO alternate function. |
| 39 | PTE1 | bidirectional | GPIO port E bit 1 with SPI0_MOSI alternate function, and high-current drive when operated as output. |
| 40 | PTE0 | bidirectional | GPIO port E bit 0 with SPI0_SCK and FTM1_CLK alternate functions, and high-current drive when operated as output. |
| 41 | PTC5 | bidirectional | GPIO port C bit 5 with FTM1_CH1 and RTCO alternate functions. |
| 42 | PTC4 | bidirectional | GPIO port C bit 4 with RTCO, FTM1_CH0, ACMP0_IN2 and SWD_CLK alternate functions. |
| 43 | PTA5 | bidirectional | GPIO port A bit 5 with IRQ and FTM0_CLK alternate functions and RESET at highest priority. |
| 44 | PTA4 | bidirectional | GPIO port A bit 4 with ACMP0_OUT alternate function and SWD_DIO at highest priority. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | LQFP-44(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 44 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating voltage | 2.7 | 5.5 | V | 7 | |||
| Digital supply voltage | VDD | -0.3 | 6 | V | 7 | ||
| Maximum current into VDD | IDD | 120 | mA | 7 | |||
| Input voltage except true open drain pins | VIN | -0.3 | V | Maximum printed as VDD + 0.3 V | 7 | ||
| Input voltage of true open drain pins | VIN | -0.3 | 6 | V | True open drain pins | 7 | |
| Instantaneous maximum current single pin limit | ID | -25 | 25 | mA | Applies to all port pins | 7 | |
| Storage temperature | TSTG | -55 | 150 | °C | 6 | ||
| Solder temperature, lead-free | TSDR | 260 | °C | Lead-free solder | 6 | ||
| Electrostatic discharge voltage, human body model | VHBM | -6000 | 6000 | V | JEDEC JESD22-A114 HBM | 6 | |
| Electrostatic discharge voltage, charged-device model | VCDM | -500 | 500 | V | JEDEC JESD22-C101 | 6 | |
| Latch-up current at ambient temperature of 125°C | ILAT | -100 | 100 | mA | Test at 125 °C case temperature | 6 | |
| Die junction temperature | TJ | -40 | 125 | °C | 18 | ||
| Ambient temperature | TA | -40 | 105 | °C | Maximum TA can be exceeded only if TJ does not exceed maximum TJ | 18 | |
| Total max IOH for all ports | IOHT | -100 | mA | 5 V | 8 | ||
| Total max IOH for all ports | IOHT | -60 | mA | 3 V | 8 | ||
| Total max IOL for all ports | IOLT | 100 | mA | 5 V | 8 | ||
| Total max IOL for all ports | IOLT | 60 | mA | 3 V | 8 | ||
| Output low voltage, standard-drive strength | VOL | 0.8 | V | All I/O pins, 5 V, Iload = 5 mA | 8 | ||
| Output low voltage, high-drive strength | VOL | 0.8 | V | High current drive pins, 5 V, Iload = 20 mA | 8 | ||
| Pullup resistors | RPU | 30 | 50 | kΩ | All digital inputs when enabled, all I/O pins other than PTA2 and PTA3 | 8 | |
| Pullup resistors | RPU | 30 | 60 | kΩ | PTA2 and PTA3 pins | 8 | |
| DC injection current, single pin limit | IIC | -2 | 2 | mA | VIN < VSS, VIN > VDD | 8 | |
| DC injection current, total MCU limit | IIC | -5 | 25 | mA | Includes sum of all stressed pins | 8 | |
| Input leakage current per pin | /IIn/ | 0.1 | 1 | µA | Pins in high impedance input mode, VIN = VDD or VSS | 8 | |
| Total leakage for all port pins | /IINTOT/ | 2 | µA | Pins in high impedance input mode, VIN = VDD or VSS | 8 | ||
| Input capacitance, all pins | CIn | 7 | pF | 8 | |||
| RAM retention voltage | VRAM | 2 | V | 8 | |||
| POR re-arm voltage | VPOR | 1.5 | 1.75 | 2 | V | Maximum is highest voltage that POR is guaranteed | 9 |
| Falling low-voltage detect threshold, high range | VLVDH | 4.2 | 4.3 | 4.4 | V | LVDV = 1 | 9 |
| Falling low-voltage warning threshold, high range Level 1 | VLVW1H | 4.3 | 4.4 | 4.5 | V | LVWV = 00 | 9 |
| Falling low-voltage warning threshold, high range Level 2 | VLVW2H | 4.5 | 4.5 | 4.6 | V | LVWV = 01 | 9 |
| Falling low-voltage warning threshold, high range Level 3 | VLVW3H | 4.6 | 4.6 | 4.7 | V | LVWV = 10 | 9 |
| Falling low-voltage warning threshold, high range Level 4 | VLVW4H | 4.7 | 4.7 | 4.8 | V | LVWV = 11 | 9 |
| High range low-voltage detect/warning hysteresis | VHYSH | 100 | mV | 9 | |||
| Falling low-voltage detect threshold, low range | VLVDL | 2.56 | 2.61 | 2.66 | V | LVDV = 0 | 9 |
| Falling low-voltage warning threshold, low range Level 1 | VLVW1L | 2.62 | 2.7 | 2.78 | V | LVWV = 00 | 9 |
| Falling low-voltage warning threshold, low range Level 2 | VLVW2L | 2.72 | 2.8 | 2.88 | V | LVWV = 01 | 9 |
| Falling low-voltage warning threshold, low range Level 3 | VLVW3L | 2.82 | 2.9 | 2.98 | V | LVWV = 10 | 9 |
| Falling low-voltage warning threshold, low range Level 4 | VLVW4L | 2.92 | 3 | 3.08 | V | LVWV = 11 | 9 |
| Low range low-voltage detect hysteresis | VHYSDL | 40 | mV | 9 | |||
| Low range low-voltage warning hysteresis | VHYSWL | 80 | mV | 9 | |||
| Buffered bandgap output | VBG | 1.14 | 1.16 | 1.18 | V | Factory trimmed at VDD = 5.0 V, Temp = 25 °C | 9 |
| Stop mode supply current | SIDD | 2 | 85 | µA | No clocks active except 1 kHz LPO clock; VDD = 5 V; -40 to 105 °C | 14 | |
| Stop mode supply current | SIDD | 1.9 | 80 | µA | No clocks active except 1 kHz LPO clock; VDD = 3 V; -40 to 105 °C | 14 | |
| Supply voltage for program/erase | Vprog/erase | 2.7 | 5.5 | V | -40 °C to 105 °C | 23 | |
| Supply voltage for read operation | VRead | 2.7 | 5.5 | V | 24 | ||
| Internal low power oscillator frequency | fLPO | 0.67 | 1 | 1.25 | KHz | 16 | |
| Supply voltage ADC absolute | VDDA | 2.7 | 5.5 | V | 5 V 12-bit ADC operating conditions | 25 | |
| Comparator supply voltage | VDDA | 2.7 | 5.5 | V | Analog comparator (ACMP) | 28 | |
| Crystal or resonator frequency high range | fhi | 4 | 20 | MHz | RANGE = 1 | 21 | |
| Crystal or resonator frequency low range | flo | 31.25 | 32.768 | 39.0625 | kHz | RANGE = 0 | 21 |
| DCO output frequency range | fdco | 32 | 40 | MHz | FLL reference = fint_t, flo, or fhi/RDIV | 22 | |
| Thermal resistance, junction to ambient, single-layer (1S), natural convection | RθJA | 75 | °C/W | 44 LQFP, per JESD51-2 | 19 | ||
| Thermal resistance, junction to ambient, four-layer (2s2p), natural convection | RθJA | 53 | °C/W | 44 LQFP, per JESD51-6 | 19 | ||
| Thermal resistance, junction to board | RθJB | 34 | °C/W | 44 LQFP, per JESD51-8 | 19 | ||
| Thermal resistance, junction to case | RθJC | 20 | °C/W | 44 LQFP | 19 | ||
| Thermal characterization parameter, junction to package top | ΨJT | 5 | °C/W | 44 LQFP, natural convection | 19 |
CAD (KiCad official)
- Symbol:
MKE02Z32VLD4 - Footprint:
Package_QFP:LQFP-44_10x10mm_P0.8mm - 3D model: LQFP-44(10x10) (KiCad packages3D, STEP)
- 3D model files:
mke02z32vld4-etched.step/mke02z32vld4-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mke02z32vld4.step/mke02z32vld4.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (37 pp, sha256
dd3ab7b95cbae8e4, retrieved 2026-11-21) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).