← Commit history

mkdv16gcl-stp: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·33983214a3 · ·parent bb4a535
2 files changed +90−10
package.json+48−8
@@ -65,13 +65,13 @@         "number": "1",         "name": "DAT2",         "type": "bidirectional",-        "description": "SD data line bit 2 (I/O push-pull in SD mode); reserved in SPI mode; host must pull up via RDAT (10 k-100 k\u03a9) even in 1-bit SD mode."+        "description": "SD data line bit 2 (I/O push-pull in SD mode); reserved in SPI mode; host must pull up via RDAT (10 k-100 kΩ) even in 1-bit SD mode."       },       {         "number": "2",         "name": "DAT3",         "type": "bidirectional",-        "description": "SD data line bit 3 (I/O push-pull in SD mode); active-low chip select (CS#) in SPI mode; carries internal 10-90 k\u03a9 pull-up (RDAT3) for mode selection and card detection, disconnectable via ACMD42."+        "description": "SD data line bit 3 (I/O push-pull in SD mode); active-low chip select (CS#) in SPI mode; carries internal 10-90 kΩ pull-up (RDAT3) for mode selection and card detection, disconnectable via ACMD42."       },       {         "number": "3",@@ -89,25 +89,25 @@         "number": "5",         "name": "CMD",         "type": "bidirectional",-        "description": "Bidirectional command/response line (push-pull); host sends addressed or broadcast commands, card returns responses; data input (DI) in SPI mode; pull up via RCMD (10 k-100 k\u03a9)."+        "description": "Bidirectional command/response line (push-pull); host sends addressed or broadcast commands, card returns responses; data input (DI) in SPI mode; pull up via RCMD (10 k-100 kΩ)."       },       {         "number": "6",         "name": "DAT0",         "type": "bidirectional",-        "description": "SD data line bit 0 (I/O push-pull); default single-bit data path after power-up; data output (DO) in SPI mode; pull up via RDAT (10 k-100 k\u03a9)."+        "description": "SD data line bit 0 (I/O push-pull); default single-bit data path after power-up; data output (DO) in SPI mode; pull up via RDAT (10 k-100 kΩ)."       },       {         "number": "7",         "name": "DAT1",         "type": "bidirectional",-        "description": "SD data line bit 1 (I/O push-pull in SD mode); acts as input on power-up until SET_BUS_WIDTH is issued; reserved in SPI mode; pull up via RDAT (10 k-100 k\u03a9)."+        "description": "SD data line bit 1 (I/O push-pull in SD mode); acts as input on power-up until SET_BUS_WIDTH is issued; reserved in SPI mode; pull up via RDAT (10 k-100 kΩ)."       },       {         "number": "8",         "name": "VDD",         "type": "power_in",-        "description": "Supply voltage 2.7 V to 3.6 V (nominally 3.3 V); standby current max 0.25 mA at 3.6 V/25 MHz, operating write current max 30 mA at 3.3 V/25 MHz; decouple with 2.2 \u00b5F capacitor."+        "description": "Supply voltage 2.7 V to 3.6 V (nominally 3.3 V); standby current max 0.25 mA at 3.6 V/25 MHz, operating write current max 30 mA at 3.3 V/25 MHz; decouple with 2.2 µF capacitor."       }     ],     "provenance": {@@ -129,6 +129,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "mkdv16gcl-stp.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          8.02,+          6.2,+          1.0+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "ce6cf9355102e6d9fa82ab7518875904dec901bf25919e4afeec3b4e1d4f3b50",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "mkdv16gcl-stp-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          8.02,+          6.2,+          1.0+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "bdaa4a63c536e1bd974fb70f649a0cdb545f7419a0492548d57bfe68c7327933",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -114,7 +114,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "mkdv16gcl-stp.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          8.02,+          6.2,+          1.0+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "ce6cf9355102e6d9fa82ab7518875904dec901bf25919e4afeec3b4e1d4f3b50",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "mkdv16gcl-stp-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          8.02,+          6.2,+          1.0+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "bdaa4a63c536e1bd974fb70f649a0cdb545f7419a0492548d57bfe68c7327933",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -161,4 +201,4 @@   "visibility": {     "public": true   }-}\ No newline at end of file+}