component
MKDV16GCL-STP
Public Made by Adomby adom
MK NAND FLASH, LGA-8(6.6x8). Pinout reviewed by a person against the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+10−7@@ -50,13 +50,13 @@ "number": "1", "name": "DAT2", "type": "bidirectional",- "description": "SD data line bit 2 (I/O push-pull in SD mode); reserved in SPI mode; host must pull up via RDAT (10 k-100 k\u03a9) even in 1-bit SD mode."+ "description": "SD data line bit 2 (I/O push-pull in SD mode); reserved in SPI mode; host must pull up via RDAT (10 k-100 kΩ) even in 1-bit SD mode." }, { "number": "2", "name": "DAT3", "type": "bidirectional",- "description": "SD data line bit 3 (I/O push-pull in SD mode); active-low chip select (CS#) in SPI mode; carries internal 10-90 k\u03a9 pull-up (RDAT3) for mode selection and card detection, disconnectable via ACMD42."+ "description": "SD data line bit 3 (I/O push-pull in SD mode); active-low chip select (CS#) in SPI mode; carries internal 10-90 kΩ pull-up (RDAT3) for mode selection and card detection, disconnectable via ACMD42." }, { "number": "3",@@ -74,25 +74,25 @@ "number": "5", "name": "CMD", "type": "bidirectional",- "description": "Bidirectional command/response line (push-pull); host sends addressed or broadcast commands, card returns responses; data input (DI) in SPI mode; pull up via RCMD (10 k-100 k\u03a9)."+ "description": "Bidirectional command/response line (push-pull); host sends addressed or broadcast commands, card returns responses; data input (DI) in SPI mode; pull up via RCMD (10 k-100 kΩ)." }, { "number": "6", "name": "DAT0", "type": "bidirectional",- "description": "SD data line bit 0 (I/O push-pull); default single-bit data path after power-up; data output (DO) in SPI mode; pull up via RDAT (10 k-100 k\u03a9)."+ "description": "SD data line bit 0 (I/O push-pull); default single-bit data path after power-up; data output (DO) in SPI mode; pull up via RDAT (10 k-100 kΩ)." }, { "number": "7", "name": "DAT1", "type": "bidirectional",- "description": "SD data line bit 1 (I/O push-pull in SD mode); acts as input on power-up until SET_BUS_WIDTH is issued; reserved in SPI mode; pull up via RDAT (10 k-100 k\u03a9)."+ "description": "SD data line bit 1 (I/O push-pull in SD mode); acts as input on power-up until SET_BUS_WIDTH is issued; reserved in SPI mode; pull up via RDAT (10 k-100 kΩ)." }, { "number": "8", "name": "VDD", "type": "power_in",- "description": "Supply voltage 2.7 V to 3.6 V (nominally 3.3 V); standby current max 0.25 mA at 3.6 V/25 MHz, operating write current max 30 mA at 3.3 V/25 MHz; decouple with 2.2 \u00b5F capacitor."+ "description": "Supply voltage 2.7 V to 3.6 V (nominally 3.3 V); standby current max 0.25 mA at 3.6 V/25 MHz, operating write current max 30 mA at 3.3 V/25 MHz; decouple with 2.2 µF capacitor." } ], "provenance": {@@ -157,5 +157,8 @@ "docs/mkdv16gcl-stp-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }