main
History Download
Ray Publish 0.1.0 c7ad6a2

MKDV08GCL-STP

MK · NAND FLASH · LGA-8(6.6x8)

MKDV08GCL-STP from MK, in a LGA-8(6.6x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DAT2 bidirectional SD mode data line bit 2 (I/O push-pull), input on power up until SET_BUS_WIDTH; reserved (RSV) in SPI mode.
2 DAT3 bidirectional SD mode data line bit 3 (I/O push-pull) with 50 kohm card pull-up at power up used for card detection and mode selection (drive low for SPI mode); Chip Select (neg true) input in SPI mode.
3 CLK input Clock input from the host, supporting up to 50MHz clock frequency in both SD and SPI mode.
4 GND power_in Supply voltage ground (VSS).
5 CMD bidirectional Command/Response push-pull line in SD mode, needing a 10-100 kohm pull-up; Data In in SPI mode.
6 DAT0 bidirectional SD mode data line bit 0 (I/O push-pull) with 10-100 kohm host pull-up; Data Out in SPI mode.
7 DAT1 bidirectional SD mode data line bit 1 (I/O push-pull), input on power up until SET_BUS_WIDTH; reserved (RSV) in SPI mode.
8 VDD power_in Supply voltage of 2.7V to 3.6V, with 2.2uF capacitance recommended on VDD.

Key specifications

Parameter Value
Manufacturer MK
Package LGA-8(6.6x8)
Category Memory
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VDD 2.7 3.6 V 12
Standby Current ICC1 0.25 mA VDD = 3.6V, Clock 25MHz 12
Standby Current ICC1 0.05 mA VDD = 3.3V, Clock STOP, Ta=25℃ 12
Operation Current Write ICC2 30 mA 3.3V / 25MHz 12
Operation Current Read ICC2 28 mA 3.3V / 25MHz 12
Input Voltage Setup Time Vrs 250 ms From 0V to VDD min 12
Input Leakage Current for all pins -10 10 uA 12
Output Leakage Current for all outputs -10 10 uA 12
Pull up Resistance RCMD, RDAT RCMD, RDAT 10 100 kΩ 12
Pull up Resistance inside card (pin1) RDAT3 10 90 kΩ 12
Total bus capacitance for each signal line CL 40 pF 1 card, CHOST+CBUS≦30pF 12
Card capacitance for signal pin CCARD 10 pF 12
Capacity Connected to Power line CC 5 uF 12
Operating Temperature Ta -25 85 ℃ Operation 5
Storage Temperature Tstg -40 85 ℃ Storage 5

CAD (KiCad official)

  • Symbol: MKDV08GCL-STP
  • Footprint: Package_LGA:LGA-8_8x6.2mm_P1.27mm
  • 3D model: LGA-8(6.6x8), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.0 mm nominal LGA height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: mkdv08gcl-stp-etched.step / mkdv08gcl-stp-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mkdv08gcl-stp.step / mkdv08gcl-stp.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MK datasheet (21 pp, sha256 d21400e090b98897, retrieved 2026-11-02, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF