Generated by kicad-footprint-generator · KiCad file format 20260206
MKDV08GCL-STP
MK · NAND FLASH · LGA-8(6.6x8)
MKDV08GCL-STP from MK, in a LGA-8(6.6x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DAT2 | bidirectional | SD mode data line bit 2 (I/O push-pull), input on power up until SET_BUS_WIDTH; reserved (RSV) in SPI mode. |
| 2 | DAT3 | bidirectional | SD mode data line bit 3 (I/O push-pull) with 50 kohm card pull-up at power up used for card detection and mode selection (drive low for SPI mode); Chip Select (neg true) input in SPI mode. |
| 3 | CLK | input | Clock input from the host, supporting up to 50MHz clock frequency in both SD and SPI mode. |
| 4 | GND | power_in | Supply voltage ground (VSS). |
| 5 | CMD | bidirectional | Command/Response push-pull line in SD mode, needing a 10-100 kohm pull-up; Data In in SPI mode. |
| 6 | DAT0 | bidirectional | SD mode data line bit 0 (I/O push-pull) with 10-100 kohm host pull-up; Data Out in SPI mode. |
| 7 | DAT1 | bidirectional | SD mode data line bit 1 (I/O push-pull), input on power up until SET_BUS_WIDTH; reserved (RSV) in SPI mode. |
| 8 | VDD | power_in | Supply voltage of 2.7V to 3.6V, with 2.2uF capacitance recommended on VDD. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MK |
| Package | LGA-8(6.6x8) |
| Category | Memory |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 2.7 | 3.6 | V | 12 | ||
| Standby Current | ICC1 | 0.25 | mA | VDD = 3.6V, Clock 25MHz | 12 | ||
| Standby Current | ICC1 | 0.05 | mA | VDD = 3.3V, Clock STOP, Ta=25℃ | 12 | ||
| Operation Current Write | ICC2 | 30 | mA | 3.3V / 25MHz | 12 | ||
| Operation Current Read | ICC2 | 28 | mA | 3.3V / 25MHz | 12 | ||
| Input Voltage Setup Time | Vrs | 250 | ms | From 0V to VDD min | 12 | ||
| Input Leakage Current for all pins | -10 | 10 | uA | 12 | |||
| Output Leakage Current for all outputs | -10 | 10 | uA | 12 | |||
| Pull up Resistance RCMD, RDAT | RCMD, RDAT | 10 | 100 | kΩ | 12 | ||
| Pull up Resistance inside card (pin1) | RDAT3 | 10 | 90 | kΩ | 12 | ||
| Total bus capacitance for each signal line | CL | 40 | pF | 1 card, CHOST+CBUS≦30pF | 12 | ||
| Card capacitance for signal pin | CCARD | 10 | pF | 12 | |||
| Capacity Connected to Power line | CC | 5 | uF | 12 | |||
| Operating Temperature | Ta | -25 | 85 | ℃ | Operation | 5 | |
| Storage Temperature | Tstg | -40 | 85 | ℃ | Storage | 5 |
CAD (KiCad official)
- Symbol:
MKDV08GCL-STP - Footprint:
Package_LGA:LGA-8_8x6.2mm_P1.27mm - 3D model: LGA-8(6.6x8), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.0 mm nominal LGA height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
mkdv08gcl-stp-etched.step/mkdv08gcl-stp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mkdv08gcl-stp.step/mkdv08gcl-stp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MK datasheet (21 pp, sha256
d21400e090b98897, retrieved 2026-11-02, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).