main
Ray Publish 0.1.0 0d1804d

MK22FN128VLL10

NXP Semicon · Pre-ordered MCUs · QFP-100(14x14)

MK22FN128VLL10 from NXP Semicon, in a QFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PTE0/CLKOUT32K bidirectional Multiplexed GPIO PTE0 with alternates ADC1_SE4a, CLKOUT32K, SPI1_PCS1, UART1_TX, I2C1_SDA and RTC_CLKOUT per the signal multiplexing table.
2 PTE1/LLWU_P0 bidirectional Multiplexed GPIO PTE1 with LLWU_P0 wakeup and alternates ADC1_SE5a, SPI1_SOUT, UART1_RX, I2C1_SCL and SPI1_SIN.
3 PTE2/LLWU_P1 bidirectional Multiplexed GPIO PTE2 with LLWU_P1 wakeup and alternates ADC1_SE6a, SPI1_SCK and UART1_CTS_b.
4 PTE3 bidirectional Multiplexed GPIO PTE3 with alternates ADC1_SE7a, SPI1_SIN, UART1_RTS_b and SPI1_SOUT.
5 PTE4/LLWU_P2 bidirectional Multiplexed GPIO PTE4 with LLWU_P2 wakeup and alternates SPI1_PCS0 and LPUART0_TX; default function is disabled.
6 PTE5 bidirectional Multiplexed GPIO PTE5 with alternates SPI1_PCS2 and LPUART0_RX; default function is disabled.
7 PTE6 bidirectional Multiplexed GPIO PTE6 with alternates SPI1_PCS3, LPUART0_CTS_b, I2S0_MCLK and USB_SOF_OUT; default function is disabled.
8 VDD power_in Digital supply pin; the datasheet operating voltage range is 1.71 to 3.6 V (including flash writes).
9 VSS power_in Digital ground pin.
10 USB0_DP bidirectional USB LS/FS D+ signal of the on-chip USB OTG 2.0 transceiver; leave floating if USB is unused.
11 USB0_DM bidirectional USB LS/FS D- signal of the on-chip USB OTG 2.0 transceiver; leave floating if USB is unused.
12 USBVDD power_in USB transceiver supply pin; if USB is unused the datasheet recommends tying it to ground through 10 kΩ.
13 NC unconnected No connection; the multiplexing table lists this pin as NC.
14 ADC0_DP1 passive Analog differential input ADC0_DP1; the datasheet lists no other function for this pin.
15 ADC0_DM1 passive Analog differential input ADC0_DM1; the datasheet lists no other function for this pin.
16 ADC1_DP1/ADC0_DP2 passive Analog differential input shared between ADC1_DP1 and ADC0_DP2.
17 ADC1_DM1/ADC0_DM2 passive Analog differential input shared between ADC1_DM1 and ADC0_DM2.
18 ADC0_DP0/ADC1_DP3 passive Analog differential input shared between ADC0_DP0 and ADC1_DP3.
19 ADC0_DM0/ADC1_DM3 passive Analog differential input shared between ADC0_DM0 and ADC1_DM3.
20 ADC1_DP0/ADC0_DP3 passive Analog differential input shared between ADC1_DP0 and ADC0_DP3.
21 ADC1_DM0/ADC0_DM3 passive Analog differential input shared between ADC1_DM0 and ADC0_DM3.
22 VDDA power_in Analog supply; the datasheet says to always connect it to the VDD potential.
23 VREFH power_in High reference voltage for the ADC; the datasheet says to always connect it to the VDD potential.
24 VREFL power_in Low reference voltage for the ADC; the datasheet says to always connect it to the VSS potential.
25 VSSA power_in Analog ground; the datasheet says to always connect it to the VSS potential.
26 VREF_OUT/CMP1_IN5/CMP0_IN5/ADC1_SE18 output Voltage reference output shared with CMP1_IN5, CMP0_IN5 and ADC1_SE18; float if the analog interface is unused.
27 DAC0_OUT/CMP1_IN3/ADC0_SE23 output 12-bit DAC output shared with CMP1_IN3 and ADC0_SE23; float if unused.
28 XTAL32 output 32 kHz crystal oscillator output; float if the oscillator is unused.
29 EXTAL32 input 32 kHz crystal oscillator input; float if the oscillator is unused.
30 VBAT power_in Backup power supply pin for the RTC domain; the datasheet says to float it if unused.
31 PTE24 bidirectional Multiplexed GPIO PTE24 with alternates ADC0_SE17, I2C0_SCL and EWM_OUT_b.
32 PTE25 bidirectional Multiplexed GPIO PTE25 with alternates ADC0_SE18, I2C0_SDA and EWM_IN.
33 PTE26/CLKOUT32K bidirectional Multiplexed GPIO PTE26 with alternates CLKOUT32K, RTC_CLKOUT and USB_CLKIN; default function is disabled.
34 PTA0 bidirectional Default JTAG_TCLK/SWD_CLK/EZP_CLK pin (default JTAG with pulldown); alternates include GPIO PTA0, UART0_CTS_b and FTM0_CH5.
35 PTA1 bidirectional Default JTAG_TDI/EZP_DI pin (default JTAG with pullup); alternates include GPIO PTA1, UART0_RX and FTM0_CH6.
36 PTA2 bidirectional Default JTAG_TDO/TRACE_SWO/EZP_DO pin (default JTAG with pullup); alternates include GPIO PTA2, UART0_TX and FTM0_CH7.
37 PTA3 bidirectional Default JTAG_TMS/SWD_DIO pin (default JTAG with pullup); alternates include GPIO PTA3, UART0_RTS_b and FTM0_CH0.
38 PTA4/LLWU_P3 bidirectional Default NMI_b/EZP_CS_b pin; alternates include GPIO PTA4 with LLWU_P3 wakeup and FTM0_CH1; the datasheet recommends a 10 kΩ pullup or disabling and floating if unused.
39 PTA5 bidirectional Multiplexed GPIO PTA5 with alternates USB_CLKIN, FTM0_CH2, I2S0_TX_BCLK and JTAG_TRST_b; default function is disabled.
40 VDD power_in Digital supply pin; the datasheet operating voltage range is 1.71 to 3.6 V (including flash writes).
41 VSS power_in Digital ground pin.
42 PTA12 bidirectional Multiplexed GPIO PTA12 with alternates FTM1_CH0, I2S0_TXD0 and FTM1_QD_PHA; default function is disabled.
43 PTA13/LLWU_P4 bidirectional Multiplexed GPIO PTA13 with LLWU_P4 wakeup and alternates FTM1_CH1, I2S0_TX_FS and FTM1_QD_PHB; default function is disabled.
44 PTA14 bidirectional Multiplexed GPIO PTA14 with alternates SPI0_PCS0, UART0_TX and I2S0_RX_BCLK; default function is disabled.
45 PTA15 bidirectional Multiplexed GPIO PTA15 with alternates SPI0_SCK, UART0_RX and I2S0_RXD0; default function is disabled.
46 PTA16 bidirectional Multiplexed GPIO PTA16 with alternates SPI0_SOUT, UART0_CTS_b and I2S0_RX_FS; default function is disabled.
47 PTA17 bidirectional Multiplexed GPIO PTA17 with alternates ADC1_SE17, SPI0_SIN, UART0_RTS_b and I2S0_MCLK.
48 VDD power_in Digital supply pin; the datasheet operating voltage range is 1.71 to 3.6 V (including flash writes).
49 VSS power_in Digital ground pin.
50 PTA18/EXTAL0 bidirectional Crystal/external clock input EXTAL0 or GPIO PTA18 with alternates FTM0_FLT2 and FTM_CLKIN0; float if unused as an analog input.
51 PTA19/XTAL0 bidirectional Crystal oscillator output XTAL0 or GPIO PTA19 with alternates FTM1_FLT0, FTM_CLKIN1 and LPTMR0_ALT1; float if unused.
52 RESET_b input Reset pin RESET_b.
53 PTB0/LLWU_P5 bidirectional Multiplexed GPIO PTB0 with LLWU_P5 wakeup and alternates ADC0_SE8/ADC1_SE8, I2C0_SCL, FTM1_CH0 and FTM1_QD_PHA.
54 PTB1 bidirectional Multiplexed GPIO PTB1 with alternates ADC0_SE9/ADC1_SE9, I2C0_SDA, FTM1_CH1 and FTM1_QD_PHB.
55 PTB2 bidirectional Multiplexed GPIO PTB2 with alternates ADC0_SE12, I2C0_SCL, UART0_RTS_b and FTM0_FLT3.
56 PTB3 bidirectional Multiplexed GPIO PTB3 with alternates ADC0_SE13, I2C0_SDA, UART0_CTS_b and FTM0_FLT0.
57 PTB9 bidirectional Multiplexed GPIO PTB9 with alternates SPI1_PCS1 and LPUART0_CTS_b; default function is disabled.
58 PTB10 bidirectional Multiplexed GPIO PTB10 with alternates ADC1_SE14, SPI1_PCS0, LPUART0_RX and FTM0_FLT1.
59 PTB11 bidirectional Multiplexed GPIO PTB11 with alternates ADC1_SE15, SPI1_SCK, LPUART0_TX and FTM0_FLT2.
60 VSS power_in Digital ground pin.
61 VDD power_in Digital supply pin; the datasheet operating voltage range is 1.71 to 3.6 V (including flash writes).
62 PTB16 bidirectional Multiplexed GPIO PTB16 with alternates SPI1_SOUT, UART0_RX, FTM_CLKIN0 and EWM_IN; default function is disabled.
63 PTB17 bidirectional Multiplexed GPIO PTB17 with alternates SPI1_SIN, UART0_TX, FTM_CLKIN1 and EWM_OUT_b; default function is disabled.
64 PTB18 bidirectional Multiplexed GPIO PTB18 with alternates FTM2_CH0, I2S0_TX_BCLK and FTM2_QD_PHA; default function is disabled.
65 PTB19 bidirectional Multiplexed GPIO PTB19 with alternates FTM2_CH1, I2S0_TX_FS and FTM2_QD_PHB; default function is disabled.
66 PTB20 bidirectional Multiplexed GPIO PTB20 with alternate CMP0_OUT; default function is disabled.
67 PTB21 bidirectional Multiplexed GPIO PTB21 with alternate CMP1_OUT; default function is disabled.
68 PTB22 bidirectional Multiplexed GPIO PTB22; default function is disabled and no other alternate is listed.
69 PTB23 bidirectional Multiplexed GPIO PTB23 with alternate SPI0_PCS5; default function is disabled.
70 PTC0 bidirectional Multiplexed GPIO PTC0 with alternates ADC0_SE14, SPI0_PCS4, PDB0_EXTRG and USB_SOF_OUT.
71 PTC1/LLWU_P6 bidirectional Multiplexed GPIO PTC1 with LLWU_P6 wakeup and alternates ADC0_SE15, SPI0_PCS3, UART1_RTS_b, FTM0_CH0, I2S0_TXD0 and LPUART0_RTS_b.
72 PTC2 bidirectional Multiplexed GPIO PTC2 with alternates ADC0_SE4b/CMP1_IN0, SPI0_PCS2, UART1_CTS_b, FTM0_CH1, I2S0_TX_FS and LPUART0_CTS_b.
73 PTC3/LLWU_P7 bidirectional Multiplexed GPIO PTC3 with LLWU_P7 wakeup and alternates CMP1_IN1, SPI0_PCS1, UART1_RX, FTM0_CH2, CLKOUT, I2S0_TX_BCLK and LPUART0_RX.
74 VSS power_in Digital ground pin.
75 VDD power_in Digital supply pin; the datasheet operating voltage range is 1.71 to 3.6 V (including flash writes).
76 PTC4/LLWU_P8 bidirectional Multiplexed GPIO PTC4 with LLWU_P8 wakeup and alternates SPI0_PCS0, UART1_TX, FTM0_CH3, CMP1_OUT and LPUART0_TX; default function is disabled.
77 PTC5/LLWU_P9 bidirectional Multiplexed GPIO PTC5 with LLWU_P9 wakeup and alternates SPI0_SCK, LPTMR0_ALT2, I2S0_RXD0, CMP0_OUT and FTM0_CH2; default function is disabled.
78 PTC6/LLWU_P10 bidirectional Multiplexed GPIO PTC6 with LLWU_P10 wakeup and alternates CMP0_IN0, SPI0_SOUT, PDB0_EXTRG, I2S0_RX_BCLK and I2S0_MCLK.
79 PTC7 bidirectional Multiplexed GPIO PTC7 with alternates CMP0_IN1, SPI0_SIN, USB_SOF_OUT and I2S0_RX_FS.
80 PTC8 bidirectional Multiplexed GPIO PTC8 with alternates ADC1_SE4b/CMP0_IN2 and I2S0_MCLK; default function is disabled.
81 PTC9 bidirectional Multiplexed GPIO PTC9 with alternates ADC1_SE5b/CMP0_IN3, I2S0_RX_BCLK and FTM2_FLT0.
82 PTC10 bidirectional Multiplexed GPIO PTC10 with alternates ADC1_SE6b, I2C1_SCL and I2S0_RX_FS.
83 PTC11/LLWU_P11 bidirectional Multiplexed GPIO PTC11 with LLWU_P11 wakeup and alternates ADC1_SE7b and I2C1_SDA.
84 PTC12 bidirectional Multiplexed GPIO PTC12; default function is disabled and no alternate is listed.
85 PTC13 bidirectional Multiplexed GPIO PTC13; default function is disabled and no alternate is listed.
86 PTC14 bidirectional Multiplexed GPIO PTC14; default function is disabled and no alternate is listed.
87 PTC15 bidirectional Multiplexed GPIO PTC15; default function is disabled and no alternate is listed.
88 VSS power_in Digital ground pin.
89 VDD power_in Digital supply pin; the datasheet operating voltage range is 1.71 to 3.6 V (including flash writes).
90 PTC16 bidirectional Multiplexed GPIO PTC16 with alternate LPUART0_RX; default function is disabled.
91 PTC17 bidirectional Multiplexed GPIO PTC17 with alternate LPUART0_TX; default function is disabled.
92 PTC18 bidirectional Multiplexed GPIO PTC18 with alternate LPUART0_RTS_b; default function is disabled.
93 PTD0/LLWU_P12 bidirectional Multiplexed GPIO PTD0 with LLWU_P12 wakeup and alternates SPI0_PCS0, UART2_RTS_b and LPUART0_RTS_b; default function is disabled.
94 PTD1 bidirectional Multiplexed GPIO PTD1 with alternates ADC0_SE5b, SPI0_SCK, UART2_CTS_b and LPUART0_CTS_b.
95 PTD2/LLWU_P13 bidirectional Multiplexed GPIO PTD2 with LLWU_P13 wakeup and alternates SPI0_SOUT, UART2_RX, LPUART0_RX and I2C0_SCL; default function is disabled.
96 PTD3 bidirectional Multiplexed GPIO PTD3 with alternates SPI0_SIN, UART2_TX, LPUART0_TX and I2C0_SDA; default function is disabled.
97 PTD4/LLWU_P14 bidirectional Multiplexed GPIO PTD4 with LLWU_P14 wakeup and alternates SPI0_PCS1, UART0_RTS_b, FTM0_CH4, EWM_IN and SPI1_PCS0.
98 PTD5 bidirectional Multiplexed GPIO PTD5 with alternates ADC0_SE6b, SPI0_PCS2, UART0_CTS_b, FTM0_CH5, EWM_OUT_b and SPI1_SCK.
99 PTD6/LLWU_P15 bidirectional Multiplexed GPIO PTD6 with LLWU_P15 wakeup and alternates ADC0_SE7b, SPI0_PCS3, UART0_RX, FTM0_CH6, FTM0_FLT0 and SPI1_SOUT.
100 PTD7 bidirectional Multiplexed GPIO PTD7 with alternates UART0_TX, FTM0_CH7, FTM0_FLT1 and SPI1_SIN; default function is disabled.

Key specifications

Parameter Value
Manufacturer NXP Semicon
Package QFP-100(14x14)
Category Embedded Processors & Controllers
Pins 100

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage temperature TSTG -55 150 °C 5
Solder temperature, lead-free TSDR 260 °C 5
Electrostatic discharge voltage, human body model VHBM -2000 2000 V 5
Electrostatic discharge voltage, charged-device model VCDM -500 500 V 5
Latch-up current at ambient temperature of 105°C ILAT -100 100 mA ambient temperature of 105°C 5
USB Transceiver supply voltage USBVDD -0.3 3.8 V 6
Digital supply voltage VDD -0.3 3.8 V 6
Digital supply current IDD 145 mA 6
Maximum current single pin limit (applies to all digital pins) ID -25 25 mA 6
USB0_DP input voltage VUSB0_DP -0.3 3.63 V 6
USB0_DM input voltage VUSB0_DM -0.3 3.63 V 6
RTC battery supply voltage VBAT -0.3 3.8 V 6
Supply voltage VDD 1.71 3.6 V 7
Analog supply voltage VDDA 1.71 3.6 V 7
VDD-to-VDDA differential voltage VDD, VDDA -0.1 0.1 V 7
VSS-to-VSSA differential voltage VSS, VSSA -0.1 0.1 V 7
RTC battery supply voltage VBAT 1.71 3.6 V 7
USB Transceiver supply voltage USBVDD 3 3.6 V 7
Analog and I/O pin DC injection current, single pin IICIO -3 mA VIN < VSS-0.3V (negative current injection) 7
Contiguous pin DC injection current, regional limit IICcont -25 mA negative current injection; sum over 16 contiguous pins 7
VDD voltage required to retain RAM VRAM 1.2 V 7
Falling VDD POR detect voltage VPOR 0.8 1.1 1.5 V 7
Falling low-voltage detect threshold, high range VLVDH 2.48 2.56 2.64 V LVDV=01 7
Oscillator crystal or resonator frequency, low-frequency mode fosc_lo 32 40 kHz MCG_C2[RANGE]=00 29
Oscillator crystal or resonator frequency, high-frequency mode (low range) fosc_hi_1 3 8 MHz MCG_C2[RANGE]=01 30
Oscillator crystal or resonator frequency, high frequency mode (high range) fosc_hi_2 8 32 MHz MCG_C2[RANGE]=1x 30
Input clock frequency (external clock mode) fec_extal 50 MHz external clock mode 30
Input clock duty cycle (external clock mode) tdc_extal 40 50 60 % external clock mode 30
Parasitical capacitance of EXTAL32 and XTAL32 Cpara 5 7 pF 30
Externally provided input clock amplitude vec_extal32 700 mV peak-to-peak value 31
Supply voltage delta to VDD (VDD, VDDA) ΔVDDA -100 0 100 mV 34
Ground voltage delta to VSS (VSS, VSSA) ΔVSSA -100 0 100 mV 34
ADC reference voltage high VREFH 1.13 V 34
Input capacitance CADIN 8 10 pF 16-bit mode 34
Input capacitance CADIN 4 5 pF 8-bit / 10-bit / 12-bit modes 34
Input series resistance RADIN 2 5 kΩ 34
Analog source resistance (external) RAS 5 kΩ 13-bit / 12-bit modes, fADCK < 4 MHz 34
ADC conversion clock frequency fADCK 1 24 MHz ≤ 13-bit mode 34
ADC conversion clock frequency fADCK 2 12 MHz 16-bit mode 34
ADC conversion rate Crate 20 1200 Ksps ≤ 13-bit modes; no ADC hardware averaging; continuous conversions enabled 34
ADC conversion rate Crate 37 461 Ksps 16-bit mode; no ADC hardware averaging; continuous conversions enabled 35
Supply current IDDA_ADC 0.215 1.7 mA 36
Total unadjusted error TUE -6.8 4 6.8 LSB 12-bit modes 36
Total unadjusted error TUE -2.1 1.4 2.1 LSB <12-bit modes 36
Supply current, High-speed mode IDDHS 200 μA EN=1, PMODE=1 38
Supply current, low-speed mode IDDLS 20 μA EN=1, PMODE=0 38
Propagation delay, high-speed mode tDHS 20 50 200 ns EN=1, PMODE=1 38
Propagation delay, low-speed mode tDLS 80 250 600 ns EN=1, PMODE=0 38
Output low VCMPOl 0.5 V 38
Average current adder during high voltage flash programming operation IDD_PGM 2.5 6 mA 32
Average current adder during high voltage flash erase operation IDD_ERS 1.5 4 mA 32
Data retention after up to 10 K cycles tnvmretp10k 5 50 years 32
Data retention after up to 1 K cycles tnvmretp1k 20 100 years 32
Cycling endurance nnvmcycp 10 50 K cycles -40 °C ≤ Tj ≤ 125 °C 32
Longword Program high-voltage time thvpgm4 7.5 18 μs 31
Erase All high-voltage time thversall 104 904 ms 31
Program Longword execution time tpgm4 65 145 μs 32
Erase All Blocks execution time tersall 140 1150 ms 32
Supply current, low-power mode IDDA_DACLP 330 μA 41
Supply current, high-speed mode IDDA_DACHP 1200 μA 41

CAD (KiCad official)

  • Symbol: MK22FN128VLL10
  • Footprint: Package_QFP:LQFP-100_14x14mm_P0.5mm
  • 3D model: QFP-100(14x14) (KiCad packages3D, STEP)
  • 3D model files: mk22fn128vll10-etched.step / mk22fn128vll10-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mk22fn128vll10.step / mk22fn128vll10.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NXP Semicon datasheet (74 pp, sha256 e76ee9cbb88e568a, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF