Generated by kicad-footprint-generator · KiCad file format 20260206
MK22FN128VLL10
NXP Semicon · Pre-ordered MCUs · QFP-100(14x14)
MK22FN128VLL10 from NXP Semicon, in a QFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PTE0/CLKOUT32K | bidirectional | Multiplexed GPIO PTE0 with alternates ADC1_SE4a, CLKOUT32K, SPI1_PCS1, UART1_TX, I2C1_SDA and RTC_CLKOUT per the signal multiplexing table. |
| 2 | PTE1/LLWU_P0 | bidirectional | Multiplexed GPIO PTE1 with LLWU_P0 wakeup and alternates ADC1_SE5a, SPI1_SOUT, UART1_RX, I2C1_SCL and SPI1_SIN. |
| 3 | PTE2/LLWU_P1 | bidirectional | Multiplexed GPIO PTE2 with LLWU_P1 wakeup and alternates ADC1_SE6a, SPI1_SCK and UART1_CTS_b. |
| 4 | PTE3 | bidirectional | Multiplexed GPIO PTE3 with alternates ADC1_SE7a, SPI1_SIN, UART1_RTS_b and SPI1_SOUT. |
| 5 | PTE4/LLWU_P2 | bidirectional | Multiplexed GPIO PTE4 with LLWU_P2 wakeup and alternates SPI1_PCS0 and LPUART0_TX; default function is disabled. |
| 6 | PTE5 | bidirectional | Multiplexed GPIO PTE5 with alternates SPI1_PCS2 and LPUART0_RX; default function is disabled. |
| 7 | PTE6 | bidirectional | Multiplexed GPIO PTE6 with alternates SPI1_PCS3, LPUART0_CTS_b, I2S0_MCLK and USB_SOF_OUT; default function is disabled. |
| 8 | VDD | power_in | Digital supply pin; the datasheet operating voltage range is 1.71 to 3.6 V (including flash writes). |
| 9 | VSS | power_in | Digital ground pin. |
| 10 | USB0_DP | bidirectional | USB LS/FS D+ signal of the on-chip USB OTG 2.0 transceiver; leave floating if USB is unused. |
| 11 | USB0_DM | bidirectional | USB LS/FS D- signal of the on-chip USB OTG 2.0 transceiver; leave floating if USB is unused. |
| 12 | USBVDD | power_in | USB transceiver supply pin; if USB is unused the datasheet recommends tying it to ground through 10 kΩ. |
| 13 | NC | unconnected | No connection; the multiplexing table lists this pin as NC. |
| 14 | ADC0_DP1 | passive | Analog differential input ADC0_DP1; the datasheet lists no other function for this pin. |
| 15 | ADC0_DM1 | passive | Analog differential input ADC0_DM1; the datasheet lists no other function for this pin. |
| 16 | ADC1_DP1/ADC0_DP2 | passive | Analog differential input shared between ADC1_DP1 and ADC0_DP2. |
| 17 | ADC1_DM1/ADC0_DM2 | passive | Analog differential input shared between ADC1_DM1 and ADC0_DM2. |
| 18 | ADC0_DP0/ADC1_DP3 | passive | Analog differential input shared between ADC0_DP0 and ADC1_DP3. |
| 19 | ADC0_DM0/ADC1_DM3 | passive | Analog differential input shared between ADC0_DM0 and ADC1_DM3. |
| 20 | ADC1_DP0/ADC0_DP3 | passive | Analog differential input shared between ADC1_DP0 and ADC0_DP3. |
| 21 | ADC1_DM0/ADC0_DM3 | passive | Analog differential input shared between ADC1_DM0 and ADC0_DM3. |
| 22 | VDDA | power_in | Analog supply; the datasheet says to always connect it to the VDD potential. |
| 23 | VREFH | power_in | High reference voltage for the ADC; the datasheet says to always connect it to the VDD potential. |
| 24 | VREFL | power_in | Low reference voltage for the ADC; the datasheet says to always connect it to the VSS potential. |
| 25 | VSSA | power_in | Analog ground; the datasheet says to always connect it to the VSS potential. |
| 26 | VREF_OUT/CMP1_IN5/CMP0_IN5/ADC1_SE18 | output | Voltage reference output shared with CMP1_IN5, CMP0_IN5 and ADC1_SE18; float if the analog interface is unused. |
| 27 | DAC0_OUT/CMP1_IN3/ADC0_SE23 | output | 12-bit DAC output shared with CMP1_IN3 and ADC0_SE23; float if unused. |
| 28 | XTAL32 | output | 32 kHz crystal oscillator output; float if the oscillator is unused. |
| 29 | EXTAL32 | input | 32 kHz crystal oscillator input; float if the oscillator is unused. |
| 30 | VBAT | power_in | Backup power supply pin for the RTC domain; the datasheet says to float it if unused. |
| 31 | PTE24 | bidirectional | Multiplexed GPIO PTE24 with alternates ADC0_SE17, I2C0_SCL and EWM_OUT_b. |
| 32 | PTE25 | bidirectional | Multiplexed GPIO PTE25 with alternates ADC0_SE18, I2C0_SDA and EWM_IN. |
| 33 | PTE26/CLKOUT32K | bidirectional | Multiplexed GPIO PTE26 with alternates CLKOUT32K, RTC_CLKOUT and USB_CLKIN; default function is disabled. |
| 34 | PTA0 | bidirectional | Default JTAG_TCLK/SWD_CLK/EZP_CLK pin (default JTAG with pulldown); alternates include GPIO PTA0, UART0_CTS_b and FTM0_CH5. |
| 35 | PTA1 | bidirectional | Default JTAG_TDI/EZP_DI pin (default JTAG with pullup); alternates include GPIO PTA1, UART0_RX and FTM0_CH6. |
| 36 | PTA2 | bidirectional | Default JTAG_TDO/TRACE_SWO/EZP_DO pin (default JTAG with pullup); alternates include GPIO PTA2, UART0_TX and FTM0_CH7. |
| 37 | PTA3 | bidirectional | Default JTAG_TMS/SWD_DIO pin (default JTAG with pullup); alternates include GPIO PTA3, UART0_RTS_b and FTM0_CH0. |
| 38 | PTA4/LLWU_P3 | bidirectional | Default NMI_b/EZP_CS_b pin; alternates include GPIO PTA4 with LLWU_P3 wakeup and FTM0_CH1; the datasheet recommends a 10 kΩ pullup or disabling and floating if unused. |
| 39 | PTA5 | bidirectional | Multiplexed GPIO PTA5 with alternates USB_CLKIN, FTM0_CH2, I2S0_TX_BCLK and JTAG_TRST_b; default function is disabled. |
| 40 | VDD | power_in | Digital supply pin; the datasheet operating voltage range is 1.71 to 3.6 V (including flash writes). |
| 41 | VSS | power_in | Digital ground pin. |
| 42 | PTA12 | bidirectional | Multiplexed GPIO PTA12 with alternates FTM1_CH0, I2S0_TXD0 and FTM1_QD_PHA; default function is disabled. |
| 43 | PTA13/LLWU_P4 | bidirectional | Multiplexed GPIO PTA13 with LLWU_P4 wakeup and alternates FTM1_CH1, I2S0_TX_FS and FTM1_QD_PHB; default function is disabled. |
| 44 | PTA14 | bidirectional | Multiplexed GPIO PTA14 with alternates SPI0_PCS0, UART0_TX and I2S0_RX_BCLK; default function is disabled. |
| 45 | PTA15 | bidirectional | Multiplexed GPIO PTA15 with alternates SPI0_SCK, UART0_RX and I2S0_RXD0; default function is disabled. |
| 46 | PTA16 | bidirectional | Multiplexed GPIO PTA16 with alternates SPI0_SOUT, UART0_CTS_b and I2S0_RX_FS; default function is disabled. |
| 47 | PTA17 | bidirectional | Multiplexed GPIO PTA17 with alternates ADC1_SE17, SPI0_SIN, UART0_RTS_b and I2S0_MCLK. |
| 48 | VDD | power_in | Digital supply pin; the datasheet operating voltage range is 1.71 to 3.6 V (including flash writes). |
| 49 | VSS | power_in | Digital ground pin. |
| 50 | PTA18/EXTAL0 | bidirectional | Crystal/external clock input EXTAL0 or GPIO PTA18 with alternates FTM0_FLT2 and FTM_CLKIN0; float if unused as an analog input. |
| 51 | PTA19/XTAL0 | bidirectional | Crystal oscillator output XTAL0 or GPIO PTA19 with alternates FTM1_FLT0, FTM_CLKIN1 and LPTMR0_ALT1; float if unused. |
| 52 | RESET_b | input | Reset pin RESET_b. |
| 53 | PTB0/LLWU_P5 | bidirectional | Multiplexed GPIO PTB0 with LLWU_P5 wakeup and alternates ADC0_SE8/ADC1_SE8, I2C0_SCL, FTM1_CH0 and FTM1_QD_PHA. |
| 54 | PTB1 | bidirectional | Multiplexed GPIO PTB1 with alternates ADC0_SE9/ADC1_SE9, I2C0_SDA, FTM1_CH1 and FTM1_QD_PHB. |
| 55 | PTB2 | bidirectional | Multiplexed GPIO PTB2 with alternates ADC0_SE12, I2C0_SCL, UART0_RTS_b and FTM0_FLT3. |
| 56 | PTB3 | bidirectional | Multiplexed GPIO PTB3 with alternates ADC0_SE13, I2C0_SDA, UART0_CTS_b and FTM0_FLT0. |
| 57 | PTB9 | bidirectional | Multiplexed GPIO PTB9 with alternates SPI1_PCS1 and LPUART0_CTS_b; default function is disabled. |
| 58 | PTB10 | bidirectional | Multiplexed GPIO PTB10 with alternates ADC1_SE14, SPI1_PCS0, LPUART0_RX and FTM0_FLT1. |
| 59 | PTB11 | bidirectional | Multiplexed GPIO PTB11 with alternates ADC1_SE15, SPI1_SCK, LPUART0_TX and FTM0_FLT2. |
| 60 | VSS | power_in | Digital ground pin. |
| 61 | VDD | power_in | Digital supply pin; the datasheet operating voltage range is 1.71 to 3.6 V (including flash writes). |
| 62 | PTB16 | bidirectional | Multiplexed GPIO PTB16 with alternates SPI1_SOUT, UART0_RX, FTM_CLKIN0 and EWM_IN; default function is disabled. |
| 63 | PTB17 | bidirectional | Multiplexed GPIO PTB17 with alternates SPI1_SIN, UART0_TX, FTM_CLKIN1 and EWM_OUT_b; default function is disabled. |
| 64 | PTB18 | bidirectional | Multiplexed GPIO PTB18 with alternates FTM2_CH0, I2S0_TX_BCLK and FTM2_QD_PHA; default function is disabled. |
| 65 | PTB19 | bidirectional | Multiplexed GPIO PTB19 with alternates FTM2_CH1, I2S0_TX_FS and FTM2_QD_PHB; default function is disabled. |
| 66 | PTB20 | bidirectional | Multiplexed GPIO PTB20 with alternate CMP0_OUT; default function is disabled. |
| 67 | PTB21 | bidirectional | Multiplexed GPIO PTB21 with alternate CMP1_OUT; default function is disabled. |
| 68 | PTB22 | bidirectional | Multiplexed GPIO PTB22; default function is disabled and no other alternate is listed. |
| 69 | PTB23 | bidirectional | Multiplexed GPIO PTB23 with alternate SPI0_PCS5; default function is disabled. |
| 70 | PTC0 | bidirectional | Multiplexed GPIO PTC0 with alternates ADC0_SE14, SPI0_PCS4, PDB0_EXTRG and USB_SOF_OUT. |
| 71 | PTC1/LLWU_P6 | bidirectional | Multiplexed GPIO PTC1 with LLWU_P6 wakeup and alternates ADC0_SE15, SPI0_PCS3, UART1_RTS_b, FTM0_CH0, I2S0_TXD0 and LPUART0_RTS_b. |
| 72 | PTC2 | bidirectional | Multiplexed GPIO PTC2 with alternates ADC0_SE4b/CMP1_IN0, SPI0_PCS2, UART1_CTS_b, FTM0_CH1, I2S0_TX_FS and LPUART0_CTS_b. |
| 73 | PTC3/LLWU_P7 | bidirectional | Multiplexed GPIO PTC3 with LLWU_P7 wakeup and alternates CMP1_IN1, SPI0_PCS1, UART1_RX, FTM0_CH2, CLKOUT, I2S0_TX_BCLK and LPUART0_RX. |
| 74 | VSS | power_in | Digital ground pin. |
| 75 | VDD | power_in | Digital supply pin; the datasheet operating voltage range is 1.71 to 3.6 V (including flash writes). |
| 76 | PTC4/LLWU_P8 | bidirectional | Multiplexed GPIO PTC4 with LLWU_P8 wakeup and alternates SPI0_PCS0, UART1_TX, FTM0_CH3, CMP1_OUT and LPUART0_TX; default function is disabled. |
| 77 | PTC5/LLWU_P9 | bidirectional | Multiplexed GPIO PTC5 with LLWU_P9 wakeup and alternates SPI0_SCK, LPTMR0_ALT2, I2S0_RXD0, CMP0_OUT and FTM0_CH2; default function is disabled. |
| 78 | PTC6/LLWU_P10 | bidirectional | Multiplexed GPIO PTC6 with LLWU_P10 wakeup and alternates CMP0_IN0, SPI0_SOUT, PDB0_EXTRG, I2S0_RX_BCLK and I2S0_MCLK. |
| 79 | PTC7 | bidirectional | Multiplexed GPIO PTC7 with alternates CMP0_IN1, SPI0_SIN, USB_SOF_OUT and I2S0_RX_FS. |
| 80 | PTC8 | bidirectional | Multiplexed GPIO PTC8 with alternates ADC1_SE4b/CMP0_IN2 and I2S0_MCLK; default function is disabled. |
| 81 | PTC9 | bidirectional | Multiplexed GPIO PTC9 with alternates ADC1_SE5b/CMP0_IN3, I2S0_RX_BCLK and FTM2_FLT0. |
| 82 | PTC10 | bidirectional | Multiplexed GPIO PTC10 with alternates ADC1_SE6b, I2C1_SCL and I2S0_RX_FS. |
| 83 | PTC11/LLWU_P11 | bidirectional | Multiplexed GPIO PTC11 with LLWU_P11 wakeup and alternates ADC1_SE7b and I2C1_SDA. |
| 84 | PTC12 | bidirectional | Multiplexed GPIO PTC12; default function is disabled and no alternate is listed. |
| 85 | PTC13 | bidirectional | Multiplexed GPIO PTC13; default function is disabled and no alternate is listed. |
| 86 | PTC14 | bidirectional | Multiplexed GPIO PTC14; default function is disabled and no alternate is listed. |
| 87 | PTC15 | bidirectional | Multiplexed GPIO PTC15; default function is disabled and no alternate is listed. |
| 88 | VSS | power_in | Digital ground pin. |
| 89 | VDD | power_in | Digital supply pin; the datasheet operating voltage range is 1.71 to 3.6 V (including flash writes). |
| 90 | PTC16 | bidirectional | Multiplexed GPIO PTC16 with alternate LPUART0_RX; default function is disabled. |
| 91 | PTC17 | bidirectional | Multiplexed GPIO PTC17 with alternate LPUART0_TX; default function is disabled. |
| 92 | PTC18 | bidirectional | Multiplexed GPIO PTC18 with alternate LPUART0_RTS_b; default function is disabled. |
| 93 | PTD0/LLWU_P12 | bidirectional | Multiplexed GPIO PTD0 with LLWU_P12 wakeup and alternates SPI0_PCS0, UART2_RTS_b and LPUART0_RTS_b; default function is disabled. |
| 94 | PTD1 | bidirectional | Multiplexed GPIO PTD1 with alternates ADC0_SE5b, SPI0_SCK, UART2_CTS_b and LPUART0_CTS_b. |
| 95 | PTD2/LLWU_P13 | bidirectional | Multiplexed GPIO PTD2 with LLWU_P13 wakeup and alternates SPI0_SOUT, UART2_RX, LPUART0_RX and I2C0_SCL; default function is disabled. |
| 96 | PTD3 | bidirectional | Multiplexed GPIO PTD3 with alternates SPI0_SIN, UART2_TX, LPUART0_TX and I2C0_SDA; default function is disabled. |
| 97 | PTD4/LLWU_P14 | bidirectional | Multiplexed GPIO PTD4 with LLWU_P14 wakeup and alternates SPI0_PCS1, UART0_RTS_b, FTM0_CH4, EWM_IN and SPI1_PCS0. |
| 98 | PTD5 | bidirectional | Multiplexed GPIO PTD5 with alternates ADC0_SE6b, SPI0_PCS2, UART0_CTS_b, FTM0_CH5, EWM_OUT_b and SPI1_SCK. |
| 99 | PTD6/LLWU_P15 | bidirectional | Multiplexed GPIO PTD6 with LLWU_P15 wakeup and alternates ADC0_SE7b, SPI0_PCS3, UART0_RX, FTM0_CH6, FTM0_FLT0 and SPI1_SOUT. |
| 100 | PTD7 | bidirectional | Multiplexed GPIO PTD7 with alternates UART0_TX, FTM0_CH7, FTM0_FLT1 and SPI1_SIN; default function is disabled. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | QFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage temperature | TSTG | -55 | 150 | °C | 5 | ||
| Solder temperature, lead-free | TSDR | 260 | °C | 5 | |||
| Electrostatic discharge voltage, human body model | VHBM | -2000 | 2000 | V | 5 | ||
| Electrostatic discharge voltage, charged-device model | VCDM | -500 | 500 | V | 5 | ||
| Latch-up current at ambient temperature of 105°C | ILAT | -100 | 100 | mA | ambient temperature of 105°C | 5 | |
| USB Transceiver supply voltage | USBVDD | -0.3 | 3.8 | V | 6 | ||
| Digital supply voltage | VDD | -0.3 | 3.8 | V | 6 | ||
| Digital supply current | IDD | 145 | mA | 6 | |||
| Maximum current single pin limit (applies to all digital pins) | ID | -25 | 25 | mA | 6 | ||
| USB0_DP input voltage | VUSB0_DP | -0.3 | 3.63 | V | 6 | ||
| USB0_DM input voltage | VUSB0_DM | -0.3 | 3.63 | V | 6 | ||
| RTC battery supply voltage | VBAT | -0.3 | 3.8 | V | 6 | ||
| Supply voltage | VDD | 1.71 | 3.6 | V | 7 | ||
| Analog supply voltage | VDDA | 1.71 | 3.6 | V | 7 | ||
| VDD-to-VDDA differential voltage | VDD, VDDA | -0.1 | 0.1 | V | 7 | ||
| VSS-to-VSSA differential voltage | VSS, VSSA | -0.1 | 0.1 | V | 7 | ||
| RTC battery supply voltage | VBAT | 1.71 | 3.6 | V | 7 | ||
| USB Transceiver supply voltage | USBVDD | 3 | 3.6 | V | 7 | ||
| Analog and I/O pin DC injection current, single pin | IICIO | -3 | mA | VIN < VSS-0.3V (negative current injection) | 7 | ||
| Contiguous pin DC injection current, regional limit | IICcont | -25 | mA | negative current injection; sum over 16 contiguous pins | 7 | ||
| VDD voltage required to retain RAM | VRAM | 1.2 | V | 7 | |||
| Falling VDD POR detect voltage | VPOR | 0.8 | 1.1 | 1.5 | V | 7 | |
| Falling low-voltage detect threshold, high range | VLVDH | 2.48 | 2.56 | 2.64 | V | LVDV=01 | 7 |
| Oscillator crystal or resonator frequency, low-frequency mode | fosc_lo | 32 | 40 | kHz | MCG_C2[RANGE]=00 | 29 | |
| Oscillator crystal or resonator frequency, high-frequency mode (low range) | fosc_hi_1 | 3 | 8 | MHz | MCG_C2[RANGE]=01 | 30 | |
| Oscillator crystal or resonator frequency, high frequency mode (high range) | fosc_hi_2 | 8 | 32 | MHz | MCG_C2[RANGE]=1x | 30 | |
| Input clock frequency (external clock mode) | fec_extal | 50 | MHz | external clock mode | 30 | ||
| Input clock duty cycle (external clock mode) | tdc_extal | 40 | 50 | 60 | % | external clock mode | 30 |
| Parasitical capacitance of EXTAL32 and XTAL32 | Cpara | 5 | 7 | pF | 30 | ||
| Externally provided input clock amplitude | vec_extal32 | 700 | mV | peak-to-peak value | 31 | ||
| Supply voltage delta to VDD (VDD, VDDA) | ΔVDDA | -100 | 0 | 100 | mV | 34 | |
| Ground voltage delta to VSS (VSS, VSSA) | ΔVSSA | -100 | 0 | 100 | mV | 34 | |
| ADC reference voltage high | VREFH | 1.13 | V | 34 | |||
| Input capacitance | CADIN | 8 | 10 | pF | 16-bit mode | 34 | |
| Input capacitance | CADIN | 4 | 5 | pF | 8-bit / 10-bit / 12-bit modes | 34 | |
| Input series resistance | RADIN | 2 | 5 | kΩ | 34 | ||
| Analog source resistance (external) | RAS | 5 | kΩ | 13-bit / 12-bit modes, fADCK < 4 MHz | 34 | ||
| ADC conversion clock frequency | fADCK | 1 | 24 | MHz | ≤ 13-bit mode | 34 | |
| ADC conversion clock frequency | fADCK | 2 | 12 | MHz | 16-bit mode | 34 | |
| ADC conversion rate | Crate | 20 | 1200 | Ksps | ≤ 13-bit modes; no ADC hardware averaging; continuous conversions enabled | 34 | |
| ADC conversion rate | Crate | 37 | 461 | Ksps | 16-bit mode; no ADC hardware averaging; continuous conversions enabled | 35 | |
| Supply current | IDDA_ADC | 0.215 | 1.7 | mA | 36 | ||
| Total unadjusted error | TUE | -6.8 | 4 | 6.8 | LSB | 12-bit modes | 36 |
| Total unadjusted error | TUE | -2.1 | 1.4 | 2.1 | LSB | <12-bit modes | 36 |
| Supply current, High-speed mode | IDDHS | 200 | μA | EN=1, PMODE=1 | 38 | ||
| Supply current, low-speed mode | IDDLS | 20 | μA | EN=1, PMODE=0 | 38 | ||
| Propagation delay, high-speed mode | tDHS | 20 | 50 | 200 | ns | EN=1, PMODE=1 | 38 |
| Propagation delay, low-speed mode | tDLS | 80 | 250 | 600 | ns | EN=1, PMODE=0 | 38 |
| Output low | VCMPOl | 0.5 | V | 38 | |||
| Average current adder during high voltage flash programming operation | IDD_PGM | 2.5 | 6 | mA | 32 | ||
| Average current adder during high voltage flash erase operation | IDD_ERS | 1.5 | 4 | mA | 32 | ||
| Data retention after up to 10 K cycles | tnvmretp10k | 5 | 50 | years | 32 | ||
| Data retention after up to 1 K cycles | tnvmretp1k | 20 | 100 | years | 32 | ||
| Cycling endurance | nnvmcycp | 10 | 50 | K cycles | -40 °C ≤ Tj ≤ 125 °C | 32 | |
| Longword Program high-voltage time | thvpgm4 | 7.5 | 18 | μs | 31 | ||
| Erase All high-voltage time | thversall | 104 | 904 | ms | 31 | ||
| Program Longword execution time | tpgm4 | 65 | 145 | μs | 32 | ||
| Erase All Blocks execution time | tersall | 140 | 1150 | ms | 32 | ||
| Supply current, low-power mode | IDDA_DACLP | 330 | μA | 41 | |||
| Supply current, high-speed mode | IDDA_DACHP | 1200 | μA | 41 |
CAD (KiCad official)
- Symbol:
MK22FN128VLL10 - Footprint:
Package_QFP:LQFP-100_14x14mm_P0.5mm - 3D model: QFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files:
mk22fn128vll10-etched.step/mk22fn128vll10-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mk22fn128vll10.step/mk22fn128vll10.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (74 pp, sha256
e76ee9cbb88e568a, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).