main
Ray
Publish 0.1.0
0ed1a43
MID400SDM
**** · Transistor, Photovoltaic Output Optoisolators · SMD-8P
MID400SDM from , in a SMD-8P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN1 | input | Input terminal of the back-to-back GaAs LED pair, which must always have a series resistor RIN to limit the input current. |
| 2 | N/C | unconnected | No connect; this pin has no internal connection. |
| 3 | VIN2 | input | Input terminal of the back-to-back GaAs LED pair, which must always have a series resistor RIN to limit the input current. |
| 4 | N/C | unconnected | No connect; this pin has no internal connection. |
| 5 | GND | power_in | Circuit ground potential for the detector and output circuit. |
| 6 | VO | output | Open collector output terminal; output current IOL is rated at 20 mA maximum. |
| 7 | AUX | passive | Auxiliary programmable capacitor input used to adjust the AC voltage sensing level and time delay. |
| 8 | VCC | power_in | Supply voltage for the output circuit, operating from a 5 V DC supply with a 7 V maximum supply voltage rating. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | |
| Package | SMD-8P |
| Category | Optoisolators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage Temperature | TSTG | -55 | 125 | °C | 3 | ||
| Operating Temperature | TOPR | -40 | 85 | °C | 3 | ||
| Junction Temperature | TJ | -55 | 100 | °C | 3 | ||
| Lead Solder Temperature | TSOL | 260 | °C | for 10 seconds | 3 | ||
| Total Device Power Dissipation | PD | 115 | mW | @ TA = 25°C | 3 | ||
| Emitter RMS Current | 25 | mA | 3 | ||||
| Emitter DC Current | -30 | 30 | mA | 3 | |||
| LED Power Dissipation | PD(EMITTER) | 45 | mW | @ TA = 25°C | 3 | ||
| Low Level Output Current | IOL | 20 | mA | 3 | |||
| High Level Output Voltage | VOH | 7 | V | 3 | |||
| Supply Voltage | VCC | 7 | V | 3 | |||
| Detector Power Dissipation | PD(DETECTOR) | 70 | mW | @ TA = 25°C | 3 | ||
| Input Forward Voltage | VF | 1.5 | V | IIN(DC) = ±30 mA | 4 | ||
| Logic Low Output Supply Current | ICCL | 3 | mA | IIN(RMS) = 4.0 mA, VO = Open, VCC = 5.5V, 24 V ≤ VIN(ON_RMS) ≤ 240 V | 4 | ||
| Logic High Output Supply Current | ICCH | 0.8 | mA | IIN(RMS) = 0.15 mA, VCC = 5.5 V, VIN(OFF_RMS) ≥ 5.5 V | 4 | ||
| Logic Low Output Current | VOL | 0.18 | 0.4 | V | IIN = IIN(ON_RMS), IO = 16 mA, VCC = 4.5 V, 24 V ≤ VIN(ON_RMS) ≤ 240 V | 4 | |
| Logic High Output Current | IOH | 0.02 | 100 | A | IIN(RMS) = 0.15 mA, VO = VCC = 5.5 V, VIN(OFF_RMS) ≥ 5.5 V | 4 | |
| On-state RMS Input Voltage | VIN(ON_RMS) | 90 | V | IO = 16 mA, VO = 0.4 V, VCC = 4.5 V, RIN = 22 k | 4 | ||
| Off-state RMS Input Voltage | VIN(OFF_RMS) | 5.5 | V | IO ≤ 100 A, VO = VCC = 5.5 V, RIN = 22 k | 4 | ||
| On-state RMS Input Current | IIN(ON_RMS) | 4 | mA | IO = 16 mA, VO = 0.4 V, VCC = 4.5 V, 24 V ≤ VIN(ON_RMS) ≤ 240 V | 4 | ||
| Off-state RMS Input Current | IIN(OFF_RMS) | 0.15 | mA | IO ≤ 100 A, VO = VCC = 5.5 V, VIN(OFF_RMS) ≥ 5.5 V | 4 | ||
| Steady State Isolation Voltage | VISO | 5000 | VACRMS | Relative Humidity ≤ 50%, II−O ≤ 10 A, 1 Minute, 60 Hz | 4 | ||
| Isolation Capacitance | CISO | 2 | pF | f = 1 MHz | 4 | ||
| Isolation Resistance | RISO | 1011 | VI−O = 500 VDC | 4 |
CAD (Adom-generated)
- Symbol:
MID400SDM - Footprint:
Adom_Gen:MID400_617df3 - 3D model: generated to fit the land (STEP)
- 3D model files:
mid400sdm-etched.step/mid400sdm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mid400sdm.step/mid400sdm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: datasheet (14 pp, sha256
4eaef716190fa2e7, retrieved 2026-11-17, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.
# MID400SDM
**** · Transistor, Photovoltaic Output Optoisolators · SMD-8P
MID400SDM from , in a SMD-8P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN1 | input | Input terminal of the back-to-back GaAs LED pair, which must always have a series resistor RIN to limit the input current. |
| 2 | N/C | unconnected | No connect; this pin has no internal connection. |
| 3 | VIN2 | input | Input terminal of the back-to-back GaAs LED pair, which must always have a series resistor RIN to limit the input current. |
| 4 | N/C | unconnected | No connect; this pin has no internal connection. |
| 5 | GND | power_in | Circuit ground potential for the detector and output circuit. |
| 6 | VO | output | Open collector output terminal; output current IOL is rated at 20 mA maximum. |
| 7 | AUX | passive | Auxiliary programmable capacitor input used to adjust the AC voltage sensing level and time delay. |
| 8 | VCC | power_in | Supply voltage for the output circuit, operating from a 5 V DC supply with a 7 V maximum supply voltage rating. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | |
| Package | SMD-8P |
| Category | Optoisolators |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage Temperature | TSTG | -55 | | 125 | °C | | 3 |
| Operating Temperature | TOPR | -40 | | 85 | °C | | 3 |
| Junction Temperature | TJ | -55 | | 100 | °C | | 3 |
| Lead Solder Temperature | TSOL | | | 260 | °C | for 10 seconds | 3 |
| Total Device Power Dissipation | PD | | | 115 | mW | @ TA = 25°C | 3 |
| Emitter RMS Current | | | | 25 | mA | | 3 |
| Emitter DC Current | | -30 | | 30 | mA | | 3 |
| LED Power Dissipation | PD(EMITTER) | | | 45 | mW | @ TA = 25°C | 3 |
| Low Level Output Current | IOL | | | 20 | mA | | 3 |
| High Level Output Voltage | VOH | | | 7 | V | | 3 |
| Supply Voltage | VCC | | | 7 | V | | 3 |
| Detector Power Dissipation | PD(DETECTOR) | | | 70 | mW | @ TA = 25°C | 3 |
| Input Forward Voltage | VF | | | 1.5 | V | IIN(DC) = ±30 mA | 4 |
| Logic Low Output Supply Current | ICCL | | | 3 | mA | IIN(RMS) = 4.0 mA, VO = Open, VCC = 5.5V, 24 V ≤ VIN(ON_RMS) ≤ 240 V | 4 |
| Logic High Output Supply Current | ICCH | | | 0.8 | mA | IIN(RMS) = 0.15 mA, VCC = 5.5 V, VIN(OFF_RMS) ≥ 5.5 V | 4 |
| Logic Low Output Current | VOL | | 0.18 | 0.4 | V | IIN = IIN(ON_RMS), IO = 16 mA, VCC = 4.5 V, 24 V ≤ VIN(ON_RMS) ≤ 240 V | 4 |
| Logic High Output Current | IOH | | 0.02 | 100 | A | IIN(RMS) = 0.15 mA, VO = VCC = 5.5 V, VIN(OFF_RMS) ≥ 5.5 V | 4 |
| On-state RMS Input Voltage | VIN(ON_RMS) | 90 | | | V | IO = 16 mA, VO = 0.4 V, VCC = 4.5 V, RIN = 22 k | 4 |
| Off-state RMS Input Voltage | VIN(OFF_RMS) | | | 5.5 | V | IO ≤ 100 A, VO = VCC = 5.5 V, RIN = 22 k | 4 |
| On-state RMS Input Current | IIN(ON_RMS) | 4 | | | mA | IO = 16 mA, VO = 0.4 V, VCC = 4.5 V, 24 V ≤ VIN(ON_RMS) ≤ 240 V | 4 |
| Off-state RMS Input Current | IIN(OFF_RMS) | | | 0.15 | mA | IO ≤ 100 A, VO = VCC = 5.5 V, VIN(OFF_RMS) ≥ 5.5 V | 4 |
| Steady State Isolation Voltage | VISO | 5000 | | | VACRMS | Relative Humidity ≤ 50%, II−O ≤ 10 A, 1 Minute, 60 Hz | 4 |
| Isolation Capacitance | CISO | | | 2 | pF | f = 1 MHz | 4 |
| Isolation Resistance | RISO | 1011 | | | | VI−O = 500 VDC | 4 |
## CAD (Adom-generated)
- Symbol: `MID400SDM`
- Footprint: `Adom_Gen:MID400_617df3`
- 3D model: generated to fit the land (STEP)
- 3D model files: `mid400sdm-etched.step` / `mid400sdm-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mid400sdm.step` / `mid400sdm.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [ datasheet](https://www.onsemi.com/pdf/datasheet/mid400m-d.pdf) (14 pp, sha256 `4eaef716190fa2e7`, retrieved 2026-11-17, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.
[Datasheet PDF](docs/mid400sdm-datasheet.pdf)