main
Download ZIP Propose a change
Generated by adom_assets · KiCad file format 20240108
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mid400sdm: viewers · Ray
mid400sdm-etched.glb mid400sdm: factory component page (tier=mfr) · Ray
mid400sdm-etched.step mid400sdm: factory component page (tier=mfr) · Ray
mid400sdm-hero.glb Publish 0.1.0 · Ray
mid400sdm-hero.overlay.json Publish 0.1.0 · Ray
mid400sdm.glb Publish 0.1.0 · Ray
mid400sdm.kicad_mod Publish 0.1.0 · Ray
mid400sdm.kicad_sym Publish 0.1.0 · Ray
mid400sdm.lbr Publish 0.1.0 · Ray
mid400sdm.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 8 pins · Ray

MID400SDM

**** · Transistor, Photovoltaic Output Optoisolators · SMD-8P

MID400SDM from , in a SMD-8P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 VIN1 input Input terminal of the back-to-back GaAs LED pair, which must always have a series resistor RIN to limit the input current.
2 N/C unconnected No connect; this pin has no internal connection.
3 VIN2 input Input terminal of the back-to-back GaAs LED pair, which must always have a series resistor RIN to limit the input current.
4 N/C unconnected No connect; this pin has no internal connection.
5 GND power_in Circuit ground potential for the detector and output circuit.
6 VO output Open collector output terminal; output current IOL is rated at 20 mA maximum.
7 AUX passive Auxiliary programmable capacitor input used to adjust the AC voltage sensing level and time delay.
8 VCC power_in Supply voltage for the output circuit, operating from a 5 V DC supply with a 7 V maximum supply voltage rating.

Key specifications

Parameter Value
Manufacturer
Package SMD-8P
Category Optoisolators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage Temperature TSTG -55 125 °C 3
Operating Temperature TOPR -40 85 °C 3
Junction Temperature TJ -55 100 °C 3
Lead Solder Temperature TSOL 260 °C for 10 seconds 3
Total Device Power Dissipation PD 115 mW @ TA = 25°C 3
Emitter RMS Current 25 mA 3
Emitter DC Current -30 30 mA 3
LED Power Dissipation PD(EMITTER) 45 mW @ TA = 25°C 3
Low Level Output Current IOL 20 mA 3
High Level Output Voltage VOH 7 V 3
Supply Voltage VCC 7 V 3
Detector Power Dissipation PD(DETECTOR) 70 mW @ TA = 25°C 3
Input Forward Voltage VF 1.5 V IIN(DC) = ±30 mA 4
Logic Low Output Supply Current ICCL 3 mA IIN(RMS) = 4.0 mA, VO = Open, VCC = 5.5V, 24 V ≤ VIN(ON_RMS) ≤ 240 V 4
Logic High Output Supply Current ICCH 0.8 mA IIN(RMS) = 0.15 mA, VCC = 5.5 V, VIN(OFF_RMS) ≥ 5.5 V 4
Logic Low Output Current VOL 0.18 0.4 V IIN = IIN(ON_RMS), IO = 16 mA, VCC = 4.5 V, 24 V ≤ VIN(ON_RMS) ≤ 240 V 4
Logic High Output Current IOH 0.02 100 A IIN(RMS) = 0.15 mA, VO = VCC = 5.5 V, VIN(OFF_RMS) ≥ 5.5 V 4
On-state RMS Input Voltage VIN(ON_RMS) 90 V IO = 16 mA, VO = 0.4 V, VCC = 4.5 V, RIN = 22 k 4
Off-state RMS Input Voltage VIN(OFF_RMS) 5.5 V IO ≤ 100 A, VO = VCC = 5.5 V, RIN = 22 k 4
On-state RMS Input Current IIN(ON_RMS) 4 mA IO = 16 mA, VO = 0.4 V, VCC = 4.5 V, 24 V ≤ VIN(ON_RMS) ≤ 240 V 4
Off-state RMS Input Current IIN(OFF_RMS) 0.15 mA IO ≤ 100 A, VO = VCC = 5.5 V, VIN(OFF_RMS) ≥ 5.5 V 4
Steady State Isolation Voltage VISO 5000 VACRMS Relative Humidity ≤ 50%, II−O ≤ 10 A, 1 Minute, 60 Hz 4
Isolation Capacitance CISO 2 pF f = 1 MHz 4
Isolation Resistance RISO 1011 VI−O = 500 VDC 4

CAD (Adom-generated)

  • Symbol: MID400SDM
  • Footprint: Adom_Gen:MID400_617df3
  • 3D model: generated to fit the land (STEP)
  • 3D model files: mid400sdm-etched.step / mid400sdm-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mid400sdm.step / mid400sdm.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: datasheet (14 pp, sha256 4eaef716190fa2e7, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.

Datasheet PDF