main
Ray
Publish 0.1.0
ec8279f
MICRF221AYQS-TR
Microchip Tech · RF Transceiver ICs · QSOP-16-150mil
MICRF221AYQS-TR from Microchip Tech, in a QSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO1 | input | Reference oscillator input to the pierce oscillator stage, can be driven by an external reference of 1.5V p-p maximum, with 7pF to GND in normal operation. |
| 2 | GNDRF | power_in | Negative supply connection associated with the ANT RF input. |
| 3 | ANT | input | Antenna RF signal input, internally AC coupled; a matching network with an inductor to RF ground is recommended to improve ESD protection. |
| 4 | GNDRF | power_in | Negative supply connection associated with the ANT RF input. |
| 5 | VDD | power_in | Positive supply connection for all chip functions, operating range 3.0V to 3.6V. |
| 6 | SQ | input | Squelch control logic input with active internal pull-up (3uA typical); not recommended for the MICRF221 and should be left floating. |
| 7 | SEL0 | input | Select logic input with 3μA (8μA max) internal pull-up when not in shutdown or SLEEP, used with SEL1 to set the D3 bandwidth LSB. |
| 8 | SHDN | input | Shutdown logic control input with active internal pull-up. |
| 9 | GND | power_in | Negative supply connection for all chip functions except the RF input. |
| 10 | DO | bidirectional | Demodulated data CMOS current-limited output that also serves as the Schmitt input for serial interface data, with a 25kΩ pull-down in shutdown and sleep modes. |
| 11 | SEL1 | input | Select logic input with 3μA (8μA max) internal pull-up when not in shutdown or SLEEP, used with SEL0 to set the D4 bandwidth MSB. |
| 12 | CTH | passive | Demodulation threshold integration capacitor to GND setting the data slicing level settling time, values above 1nF recommended. |
| 13 | CAGC | passive | AGC filter capacitor connection to GND, normally greater than 0.47μF. |
| 14 | RSSI | output | Received signal strength indication output from a switched capacitor integrating op amp with 220Ω typical output impedance. |
| 15 | SCLK | input | Serial interface clock CMOS Schmitt input, with a 25kΩ pull-down present in shutdown mode. |
| 16 | RO2 | passive | Reference resonator connection, with 7pF to GND during normal operation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | QSOP-16-150mil |
| Category | RF & Radio |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 3 | 3.6 | V | Operating Ratings | 3 | |
| Ambient Temperature | TA | -40 | 105 | °C | Operating Ratings | 3 | |
| Input Voltage | Vin | 3.6 | V | Operating Ratings | 3 | ||
| Maximum Input RF Power | -20 | dBm | Operating Ratings | 3 | |||
| Receive Modulation Duty Cycle | 20 | 80 | % | Operating Ratings, Note 6 | 3 | ||
| Supply Voltage | VDD | 5 | V | 3 | |||
| Input Voltage | 5 | V | 3 | ||||
| Junction Temperature | 150 | °C | 3 | ||||
| Storage Temperature | Ts | -65 | 150 | °C | 3 | ||
| Maximum Receiver Input Power | 10 | dBm | 3 | ||||
| ESD Rating | 2 | kV | HBM | 3 | |||
| Tsleep Programming Range | Tsleep | 10 | 1300 | ms | 4 | ||
| Demodulator Filter Bandwidth | 1712 | 13000 | Hz | @ 915MHz, Programmable | 4 | ||
| Input High Voltage | 0.8 | V | Pins SCLK, DO (as input), SHDN; printed as 0.8Vdd | 4 | |||
| Input Low Voltage | 0.2 | V | Pins SCLK, DO (as input), SHDN; printed as 0.2Vdd | 4 | |||
| Output Voltage High | 0.8 | V | DO; printed as 0.8Vdd | 4 | |||
| Output Voltage Low | 0.2 | V | DO; printed as 0.2Vdd | 4 | |||
| Operating Supply Current | Iss | 9 | mA | Continuous Operation, fRX = 868MHz | 3 | ||
| Operating Supply Current | Iss | 9.5 | mA | Continuous Operation, fRX = 915MHz | 3 | ||
| Shutdown Current | Ishut | 50 | nA | 3 | |||
| Image Rejection | 20 | dB | 3 | ||||
| Receiver Sensitivity @ 1kbps | -109 | dBm | fRX = 915MHz (matched to 50Ω) | 3 | |||
| SLEEP Current | Isleep | 15 | µA | 2ms on, 1.3s off | 4 | ||
| Reference Oscillator Frequency | 14.2764 | MHz | fRX = 915MHz | 4 | |||
| Output Rise and Fall Times | 2 | µs | CI = 15 pF, pin DO, 10-90% | 4 | |||
| RSSI Response Slope | 26 | mV/dB | -109dBm to -40dBm | 5 | |||
| RSSI Output Impedance | 220 | Ω | 5 |
CAD (KiCad official)
- Symbol:
MICRF221AYQS-TR - Footprint:
Package_SO:QSOP-16_3.9x4.9mm_P0.635mm - 3D model: QSOP-16-150mil (KiCad packages3D, STEP)
- 3D model files:
micrf221ayqs-tr-etched.step/micrf221ayqs-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);micrf221ayqs-tr.step/micrf221ayqs-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (26 pp, sha256
8e57f6b5a850cae8, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MICRF221AYQS-TR
**Microchip Tech** · RF Transceiver ICs · QSOP-16-150mil
MICRF221AYQS-TR from Microchip Tech, in a QSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO1 | input | Reference oscillator input to the pierce oscillator stage, can be driven by an external reference of 1.5V p-p maximum, with 7pF to GND in normal operation. |
| 2 | GNDRF | power_in | Negative supply connection associated with the ANT RF input. |
| 3 | ANT | input | Antenna RF signal input, internally AC coupled; a matching network with an inductor to RF ground is recommended to improve ESD protection. |
| 4 | GNDRF | power_in | Negative supply connection associated with the ANT RF input. |
| 5 | VDD | power_in | Positive supply connection for all chip functions, operating range 3.0V to 3.6V. |
| 6 | SQ | input | Squelch control logic input with active internal pull-up (3uA typical); not recommended for the MICRF221 and should be left floating. |
| 7 | SEL0 | input | Select logic input with 3μA (8μA max) internal pull-up when not in shutdown or SLEEP, used with SEL1 to set the D3 bandwidth LSB. |
| 8 | SHDN | input | Shutdown logic control input with active internal pull-up. |
| 9 | GND | power_in | Negative supply connection for all chip functions except the RF input. |
| 10 | DO | bidirectional | Demodulated data CMOS current-limited output that also serves as the Schmitt input for serial interface data, with a 25kΩ pull-down in shutdown and sleep modes. |
| 11 | SEL1 | input | Select logic input with 3μA (8μA max) internal pull-up when not in shutdown or SLEEP, used with SEL0 to set the D4 bandwidth MSB. |
| 12 | CTH | passive | Demodulation threshold integration capacitor to GND setting the data slicing level settling time, values above 1nF recommended. |
| 13 | CAGC | passive | AGC filter capacitor connection to GND, normally greater than 0.47μF. |
| 14 | RSSI | output | Received signal strength indication output from a switched capacitor integrating op amp with 220Ω typical output impedance. |
| 15 | SCLK | input | Serial interface clock CMOS Schmitt input, with a 25kΩ pull-down present in shutdown mode. |
| 16 | RO2 | passive | Reference resonator connection, with 7pF to GND during normal operation. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | QSOP-16-150mil |
| Category | RF & Radio |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 3 | | 3.6 | V | Operating Ratings | 3 |
| Ambient Temperature | TA | -40 | | 105 | °C | Operating Ratings | 3 |
| Input Voltage | Vin | | | 3.6 | V | Operating Ratings | 3 |
| Maximum Input RF Power | | | | -20 | dBm | Operating Ratings | 3 |
| Receive Modulation Duty Cycle | | 20 | | 80 | % | Operating Ratings, Note 6 | 3 |
| Supply Voltage | VDD | | | 5 | V | | 3 |
| Input Voltage | | | | 5 | V | | 3 |
| Junction Temperature | | | | 150 | °C | | 3 |
| Storage Temperature | Ts | -65 | | 150 | °C | | 3 |
| Maximum Receiver Input Power | | | | 10 | dBm | | 3 |
| ESD Rating | | | | 2 | kV | HBM | 3 |
| Tsleep Programming Range | Tsleep | 10 | | 1300 | ms | | 4 |
| Demodulator Filter Bandwidth | | 1712 | | 13000 | Hz | @ 915MHz, Programmable | 4 |
| Input High Voltage | | 0.8 | | | V | Pins SCLK, DO (as input), SHDN; printed as 0.8Vdd | 4 |
| Input Low Voltage | | | | 0.2 | V | Pins SCLK, DO (as input), SHDN; printed as 0.2Vdd | 4 |
| Output Voltage High | | 0.8 | | | V | DO; printed as 0.8Vdd | 4 |
| Output Voltage Low | | | | 0.2 | V | DO; printed as 0.2Vdd | 4 |
| Operating Supply Current | Iss | | 9 | | mA | Continuous Operation, fRX = 868MHz | 3 |
| Operating Supply Current | Iss | | 9.5 | | mA | Continuous Operation, fRX = 915MHz | 3 |
| Shutdown Current | Ishut | | 50 | | nA | | 3 |
| Image Rejection | | | 20 | | dB | | 3 |
| Receiver Sensitivity @ 1kbps | | | -109 | | dBm | fRX = 915MHz (matched to 50Ω) | 3 |
| SLEEP Current | Isleep | | 15 | | µA | 2ms on, 1.3s off | 4 |
| Reference Oscillator Frequency | | | 14.2764 | | MHz | fRX = 915MHz | 4 |
| Output Rise and Fall Times | | | 2 | | µs | CI = 15 pF, pin DO, 10-90% | 4 |
| RSSI Response Slope | | | 26 | | mV/dB | -109dBm to -40dBm | 5 |
| RSSI Output Impedance | | | 220 | | Ω | | 5 |
## CAD (KiCad official)
- Symbol: `MICRF221AYQS-TR`
- Footprint: `Package_SO:QSOP-16_3.9x4.9mm_P0.635mm`
- 3D model: QSOP-16-150mil (KiCad packages3D, STEP)
- 3D model files: `micrf221ayqs-tr-etched.step` / `micrf221ayqs-tr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `micrf221ayqs-tr.step` / `micrf221ayqs-tr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/micrf221ayqs-tr-datasheet.pdf) (26 pp, sha256 `8e57f6b5a850cae8`, retrieved 2026-10-27, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/micrf221ayqs-tr-datasheet.pdf)