main
Ray
Publish 0.1.0
9b8d7c1
MIC94084YFT-TR
Microchip Tech · Power Management Specialized - PMIC · UDFN-4
MIC94084YFT-TR from Microchip Tech, in a UDFN-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | power_out | Drain of the internal P-channel MOSFET, the switched output of the load switch. |
| 2 | GND | power_in | Ground, should be connected to electrical ground. |
| 3 | VIN | power_in | Source of the P-channel MOSFET, the supply input, operating range 1.7V to 5.5V. |
| 4 | EN | input | Active-high CMOS/TTL enable input with internal ~2 MΩ pull-down resistor; output is off if left floating, threshold 0.4V to 1.25V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | UDFN-4 |
| Category | Power Management |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Enable Threshold Voltage | VEN_TH | 0.4 | 1.25 | V | VIN = 1.7V to 4.5V, ID = -250 μA | 4 | |
| Quiescent Current (MIC94082/3/4/5) | IQ | 8 | 15 | µA | VIN = VEN = 5.5V, ID = OPEN, measured on VIN | 4 | |
| Enable Input Current | IEN | 2.8 | 4 | µA | VIN = VEN = 5.5V, ID = OPEN | 4 | |
| Quiescent Current (Shutdown) | ISHUT-Q | 0.02 | 1 | µA | VIN = +5.5V, VEN = 0V, ID = OPEN, measured on VIN, Note 1 | 4 | |
| OFF State Leakage Current | ISHUT-SWITCH | 0.02 | 1 | µA | VIN = +5.5V, VEN = 0V, ID = SHORT, measured on VIN, Note 1 | 4 | |
| P-Channel Drain-to-Source ON Resistance | RDS(ON) | 67 | 115 | mΩ | VIN = +5.0V, ID = -100 mA, VEN = 1.5V | 4 | |
| P-Channel Drain-to-Source ON Resistance | RDS(ON) | 70 | 130 | mΩ | VIN = +4.5V, ID = -100 mA, VEN = 1.5V | 4 | |
| P-Channel Drain-to-Source ON Resistance | RDS(ON) | 80 | 165 | mΩ | VIN = +3.6V, ID = -100 mA, VEN = 1.5V | 4 | |
| P-Channel Drain-to-Source ON Resistance | RDS(ON) | 110 | 225 | mΩ | VIN = +2.5V, ID = -100 mA, VEN = 1.5V | 4 | |
| P-Channel Drain-to-Source ON Resistance | RDS(ON) | 175 | 350 | mΩ | VIN = +1.8V, ID = -100 mA, VEN = 1.5V | 4 | |
| P-Channel Drain-to-Source ON Resistance | RDS(ON) | 200 | 375 | mΩ | VIN = +1.7V, ID = -100 mA, VEN = 1.5V | 4 | |
| Turn-On Delay (MIC94084/5) | tON_DLY | 65 | 110 | 165 | µs | VIN = +3.6V, ID = -100 mA, VEN = 1.5V | 4 |
| Turn-On Rise Time (MIC94084/5) | tON_RISE | 65 | 120 | 175 | µs | VIN = +3.6V, ID = -100 mA, VEN = 1.5V | 4 |
| Turn-Off Delay Time | tOFF_DLY | 60 | 200 | ns | VIN = +3.6V, ID = -100 mA, VEN = 0V | 4 | |
| Turn-Off Fall Time | tOFF_FALL | 20 | 100 | ns | VIN = +3.6V, ID = -100 mA, VEN = 0V | 4 | |
| Input Voltage (operating) | VIN | 1.7 | 5.5 | V | 3 | ||
| Junction Temperature Range | TJ | -40 | 125 | °C | 3 | ||
| Input Voltage | VIN | 6 | V | 3 | |||
| Enable Voltage | VEN | 6 | V | 3 | |||
| Continuous Drain Current | ID | -2 | 2 | A | TA = +25°C | 3 | |
| Continuous Drain Current | ID | -1.5 | 1.5 | A | TA = +85°C | 3 | |
| Pulsed Drain Current | IDP | -6 | 6 | A | Pulse width <300 µs with <2% duty cycle | 3 | |
| Continuous Diode Current | IS | -50 | mA | 3 | |||
| Storage Temperature | TS | -55 | 150 | °C | 3 | ||
| ESD Rating (HBM) | 3 | kV | Human body model, 1.5 kΩ in series with 100 pF | 3 | |||
| Thermal Resistance Junction-to-Ambient, 4-Ld FTDFN | θJA | 140 | °C/W | 5 | |||
| Thermal Resistance Junction-to-Case, 4-Ld FTDFN | θJC | 85 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
MIC94084YFT-TR - Footprint:
Package_DFN_QFN:DFN-4_5x7mm_P5.08mm - 3D model: UDFN-4, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm nominal QFN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
mic94084yft-tr-etched.step/mic94084yft-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic94084yft-tr.step/mic94084yft-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (28 pp, sha256
7b6379e5b441a944, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MIC94084YFT-TR
**Microchip Tech** · Power Management Specialized - PMIC · UDFN-4
MIC94084YFT-TR from Microchip Tech, in a UDFN-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | power_out | Drain of the internal P-channel MOSFET, the switched output of the load switch. |
| 2 | GND | power_in | Ground, should be connected to electrical ground. |
| 3 | VIN | power_in | Source of the P-channel MOSFET, the supply input, operating range 1.7V to 5.5V. |
| 4 | EN | input | Active-high CMOS/TTL enable input with internal ~2 MΩ pull-down resistor; output is off if left floating, threshold 0.4V to 1.25V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | UDFN-4 |
| Category | Power Management |
| Pins | 4 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Enable Threshold Voltage | VEN_TH | 0.4 | | 1.25 | V | VIN = 1.7V to 4.5V, ID = -250 μA | 4 |
| Quiescent Current (MIC94082/3/4/5) | IQ | | 8 | 15 | µA | VIN = VEN = 5.5V, ID = OPEN, measured on VIN | 4 |
| Enable Input Current | IEN | | 2.8 | 4 | µA | VIN = VEN = 5.5V, ID = OPEN | 4 |
| Quiescent Current (Shutdown) | ISHUT-Q | | 0.02 | 1 | µA | VIN = +5.5V, VEN = 0V, ID = OPEN, measured on VIN, Note 1 | 4 |
| OFF State Leakage Current | ISHUT-SWITCH | | 0.02 | 1 | µA | VIN = +5.5V, VEN = 0V, ID = SHORT, measured on VIN, Note 1 | 4 |
| P-Channel Drain-to-Source ON Resistance | RDS(ON) | | 67 | 115 | mΩ | VIN = +5.0V, ID = -100 mA, VEN = 1.5V | 4 |
| P-Channel Drain-to-Source ON Resistance | RDS(ON) | | 70 | 130 | mΩ | VIN = +4.5V, ID = -100 mA, VEN = 1.5V | 4 |
| P-Channel Drain-to-Source ON Resistance | RDS(ON) | | 80 | 165 | mΩ | VIN = +3.6V, ID = -100 mA, VEN = 1.5V | 4 |
| P-Channel Drain-to-Source ON Resistance | RDS(ON) | | 110 | 225 | mΩ | VIN = +2.5V, ID = -100 mA, VEN = 1.5V | 4 |
| P-Channel Drain-to-Source ON Resistance | RDS(ON) | | 175 | 350 | mΩ | VIN = +1.8V, ID = -100 mA, VEN = 1.5V | 4 |
| P-Channel Drain-to-Source ON Resistance | RDS(ON) | | 200 | 375 | mΩ | VIN = +1.7V, ID = -100 mA, VEN = 1.5V | 4 |
| Turn-On Delay (MIC94084/5) | tON_DLY | 65 | 110 | 165 | µs | VIN = +3.6V, ID = -100 mA, VEN = 1.5V | 4 |
| Turn-On Rise Time (MIC94084/5) | tON_RISE | 65 | 120 | 175 | µs | VIN = +3.6V, ID = -100 mA, VEN = 1.5V | 4 |
| Turn-Off Delay Time | tOFF_DLY | | 60 | 200 | ns | VIN = +3.6V, ID = -100 mA, VEN = 0V | 4 |
| Turn-Off Fall Time | tOFF_FALL | | 20 | 100 | ns | VIN = +3.6V, ID = -100 mA, VEN = 0V | 4 |
| Input Voltage (operating) | VIN | 1.7 | | 5.5 | V | | 3 |
| Junction Temperature Range | TJ | -40 | | 125 | °C | | 3 |
| Input Voltage | VIN | | | 6 | V | | 3 |
| Enable Voltage | VEN | | | 6 | V | | 3 |
| Continuous Drain Current | ID | -2 | | 2 | A | TA = +25°C | 3 |
| Continuous Drain Current | ID | -1.5 | | 1.5 | A | TA = +85°C | 3 |
| Pulsed Drain Current | IDP | -6 | | 6 | A | Pulse width <300 µs with <2% duty cycle | 3 |
| Continuous Diode Current | IS | | | -50 | mA | | 3 |
| Storage Temperature | TS | -55 | | 150 | °C | | 3 |
| ESD Rating (HBM) | | | | 3 | kV | Human body model, 1.5 kΩ in series with 100 pF | 3 |
| Thermal Resistance Junction-to-Ambient, 4-Ld FTDFN | θJA | | 140 | | °C/W | | 5 |
| Thermal Resistance Junction-to-Case, 4-Ld FTDFN | θJC | | 85 | | °C/W | | 5 |
## CAD (KiCad official)
- Symbol: `MIC94084YFT-TR`
- Footprint: `Package_DFN_QFN:DFN-4_5x7mm_P5.08mm`
- 3D model: UDFN-4, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm nominal QFN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files: `mic94084yft-tr-etched.step` / `mic94084yft-tr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mic94084yft-tr.step` / `mic94084yft-tr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/mic94084yft-tr-datasheet.pdf) (28 pp, sha256 `7b6379e5b441a944`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mic94084yft-tr-datasheet.pdf)