Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MIC94084YFT-TR

Microchip Tech · Power Management Specialized - PMIC · UDFN-4

MIC94084YFT-TR from Microchip Tech, in a UDFN-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VOUT power_out Drain of the internal P-channel MOSFET, the switched output of the load switch.
2 GND power_in Ground, should be connected to electrical ground.
3 VIN power_in Source of the P-channel MOSFET, the supply input, operating range 1.7V to 5.5V.
4 EN input Active-high CMOS/TTL enable input with internal ~2 MΩ pull-down resistor; output is off if left floating, threshold 0.4V to 1.25V.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package UDFN-4
Category Power Management
Pins 4

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Enable Threshold Voltage VEN_TH 0.4 1.25 V VIN = 1.7V to 4.5V, ID = -250 μA 4
Quiescent Current (MIC94082/3/4/5) IQ 8 15 µA VIN = VEN = 5.5V, ID = OPEN, measured on VIN 4
Enable Input Current IEN 2.8 4 µA VIN = VEN = 5.5V, ID = OPEN 4
Quiescent Current (Shutdown) ISHUT-Q 0.02 1 µA VIN = +5.5V, VEN = 0V, ID = OPEN, measured on VIN, Note 1 4
OFF State Leakage Current ISHUT-SWITCH 0.02 1 µA VIN = +5.5V, VEN = 0V, ID = SHORT, measured on VIN, Note 1 4
P-Channel Drain-to-Source ON Resistance RDS(ON) 67 115 mΩ VIN = +5.0V, ID = -100 mA, VEN = 1.5V 4
P-Channel Drain-to-Source ON Resistance RDS(ON) 70 130 mΩ VIN = +4.5V, ID = -100 mA, VEN = 1.5V 4
P-Channel Drain-to-Source ON Resistance RDS(ON) 80 165 mΩ VIN = +3.6V, ID = -100 mA, VEN = 1.5V 4
P-Channel Drain-to-Source ON Resistance RDS(ON) 110 225 mΩ VIN = +2.5V, ID = -100 mA, VEN = 1.5V 4
P-Channel Drain-to-Source ON Resistance RDS(ON) 175 350 mΩ VIN = +1.8V, ID = -100 mA, VEN = 1.5V 4
P-Channel Drain-to-Source ON Resistance RDS(ON) 200 375 mΩ VIN = +1.7V, ID = -100 mA, VEN = 1.5V 4
Turn-On Delay (MIC94084/5) tON_DLY 65 110 165 µs VIN = +3.6V, ID = -100 mA, VEN = 1.5V 4
Turn-On Rise Time (MIC94084/5) tON_RISE 65 120 175 µs VIN = +3.6V, ID = -100 mA, VEN = 1.5V 4
Turn-Off Delay Time tOFF_DLY 60 200 ns VIN = +3.6V, ID = -100 mA, VEN = 0V 4
Turn-Off Fall Time tOFF_FALL 20 100 ns VIN = +3.6V, ID = -100 mA, VEN = 0V 4
Input Voltage (operating) VIN 1.7 5.5 V 3
Junction Temperature Range TJ -40 125 °C 3
Input Voltage VIN 6 V 3
Enable Voltage VEN 6 V 3
Continuous Drain Current ID -2 2 A TA = +25°C 3
Continuous Drain Current ID -1.5 1.5 A TA = +85°C 3
Pulsed Drain Current IDP -6 6 A Pulse width <300 µs with <2% duty cycle 3
Continuous Diode Current IS -50 mA 3
Storage Temperature TS -55 150 °C 3
ESD Rating (HBM) 3 kV Human body model, 1.5 kΩ in series with 100 pF 3
Thermal Resistance Junction-to-Ambient, 4-Ld FTDFN θJA 140 °C/W 5
Thermal Resistance Junction-to-Case, 4-Ld FTDFN θJC 85 °C/W 5

CAD (KiCad official)

  • Symbol: MIC94084YFT-TR
  • Footprint: Package_DFN_QFN:DFN-4_5x7mm_P5.08mm
  • 3D model: UDFN-4, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm nominal QFN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: mic94084yft-tr-etched.step / mic94084yft-tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic94084yft-tr.step / mic94084yft-tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (28 pp, sha256 7b6379e5b441a944, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF