MIC69153YME-TR

{
  "slug": "mic69153yme-tr",
  "version": "0.1.0",
  "type": "component",
  "description": "Microchip Tech Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOIC-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "mic69153yme-tr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "mic69153yme-tr.kicad_sym",
    "mic69153yme-tr.kicad_mod",
    "mic69153yme-tr.glb",
    "mic69153yme-tr.step",
    "mic69153yme-tr.lbr",
    "docs/hero.png",
    "docs/mic69153yme-tr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "mic69153yme-tr-hero.glb",
    "mic69153yme-tr-hero.overlay.json",
    "mic69153yme-tr-etched.glb"
  ],
  "component": {
    "mpn": "MIC69153YME-TR",
    "manufacturer": "Microchip Tech",
    "package": "SOIC-8-EP",
    "pin_count": 9,
    "category": "Power Management (PMIC)",
    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589795683109933056",
    "parts": {
      "symbol": "mic69153yme-tr.kicad_sym",
      "footprint": "mic69153yme-tr.kicad_mod",
      "model_3d": "mic69153yme-tr-hero.glb",
      "model_3d_plain": "mic69153yme-tr-etched.glb",
      "model_3d_step": "mic69153yme-tr-etched.step",
      "model_3d_step_plain": "mic69153yme-tr.step",
      "lbr": "mic69153yme-tr.lbr"
    },
    "distributor_links": {
      "lcsc": "C628236",
      "digikey": "576-3223-2-ND",
      "mouser": "998-MIC69153YMETR"
    },
    "distributor_check": {
      "checked_at": "2026-10-20T20:43:37Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "576-3223-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "998-MIC69153YMETR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin for the regulator; the datasheet's exposed-pad guidance (connect to ground) is stated for the DFN package."
      },
      {
        "number": "2",
        "name": "EN",
        "type": "input",
        "description": "CMOS-compatible enable input where logic-high enables and logic-low shuts down the regulator, with EN limited to 0V to VIN and not to be left floating."
      },
      {
        "number": "3",
        "name": "VIN",
        "type": "power_in",
        "description": "Input voltage that supplies current to the output power device, specified from 1.65V to 5.5V."
      },
      {
        "number": "4",
        "name": "VIN",
        "type": "power_in",
        "description": "Input voltage that supplies current to the output power device, specified from 1.65V to 5.5V; pins 3 and 4 are both VIN."
      },
      {
        "number": "5",
        "name": "VOUT",
        "type": "power_out",
        "description": "Regulator output, adjustable from 0.5V to 5.5V with an external resistor divider."
      },
      {
        "number": "6",
        "name": "VOUT",
        "type": "power_out",
        "description": "Regulator output, adjustable from 0.5V to 5.5V with an external resistor divider; pins 5 and 6 are both VOUT."
      },
      {
        "number": "7",
        "name": "ADJ",
        "type": "input",
        "description": "Adjustable regulator feedback input (VFB nominally 0.5V) connected to the resistor divider; the resistor between VOUT and ADJ should not exceed 10 kΩ."
      },
      {
        "number": "8",
        "name": "FLG",
        "type": "output",
        "description": "Open-collector error flag output that goes active-low to indicate an output fault condition, with a +6V absolute maximum rating."
      },
      {
        "number": "9",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The ePAD on the SOIC-8 package is not given a pin number in Table 3-1 and is not listed as a pin; on; Pin numbers for the SOIC-8 variant come from the 'ePAD SOIC-8 Pin Number' column of Table 3-1 (page ",
          "exposed pad 9 added from the footprint"
        ],
        "pages_sent": 22,
        "cost_usd": 0.0718,
        "at": "2026-10-20T20:39:43"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589795683109933056",
        "pages": 22,
        "sha256": "64e663a98a2e82f3",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "mic69153yme-tr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.55
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "2d6f7e774e8143e3320cbd59eb5be9f3b7864614644e3b072006e1eb05fb7fa6",
        "checked": "2026-10-20",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "mic69153yme-tr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.55
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "fa7a7e717c520fc842b5d858a0ad7fe6872df73aae47c67390c7e28aee5d9b36",
        "checked": "2026-10-20",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}