component
MIC69153YME-TR
Public Made by Adomby adom
Microchip Tech Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOIC-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 14d ago |
| viewers | 14d ago |
| mic69153yme-tr-etched.glb | 14d ago |
| mic69153yme-tr-etched.step | 14d ago |
| mic69153yme-tr-hero.glb | 14d ago |
| mic69153yme-tr-hero.overlay.json | 14d ago |
| mic69153yme-tr.glb | 14d ago |
| mic69153yme-tr.kicad_mod | 14d ago |
| mic69153yme-tr.kicad_sym | 14d ago |
| mic69153yme-tr.lbr | 14d ago |
| mic69153yme-tr.step | 14d ago |
| package.json | 14d ago |
| page.json | 14d ago |
| README.md | 14d ago |
MIC69153YME-TR
Microchip Tech · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOIC-8-EP
MIC69153YME-TR from Microchip Tech, in a SOIC-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin for the regulator; the datasheet's exposed-pad guidance (connect to ground) is stated for the DFN package. |
| 2 | EN | input | CMOS-compatible enable input where logic-high enables and logic-low shuts down the regulator, with EN limited to 0V to VIN and not to be left floating. |
| 3 | VIN | power_in | Input voltage that supplies current to the output power device, specified from 1.65V to 5.5V. |
| 4 | VIN | power_in | Input voltage that supplies current to the output power device, specified from 1.65V to 5.5V; pins 3 and 4 are both VIN. |
| 5 | VOUT | power_out | Regulator output, adjustable from 0.5V to 5.5V with an external resistor divider. |
| 6 | VOUT | power_out | Regulator output, adjustable from 0.5V to 5.5V with an external resistor divider; pins 5 and 6 are both VOUT. |
| 7 | ADJ | input | Adjustable regulator feedback input (VFB nominally 0.5V) connected to the resistor divider; the resistor between VOUT and ADJ should not exceed 10 kΩ. |
| 8 | FLG | output | Open-collector error flag output that goes active-low to indicate an output fault condition, with a +6V absolute maximum rating. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8-EP |
| Category | Power Management (PMIC) |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy | VOUT | -2 | 2 | % | Overtemperature range (the precision of the resistive divider is not included) | 3 | |
| Adjustable Feedback Voltage | VFB | 0.49 | 0.5 | 0.51 | V | 3 | |
| Feedback Pin Current | IFB | 0.25 | 1 | µA | 3 | ||
| Output Voltage Line Regulation | ΔVOUT/ΔVIN | -0.3 | 0.2 | 0.3 | %/V | VIN = VOUT +1.0V to 5.5V; For VOUT ≥ 0.65V, VIN = 1.65V to 5.5V | 3 |
| Output Voltage Load Regulation | ΔVOUT/VOUT | -0.2 | 0.2 | 0.2 | % | IL = 10 mA to 1.5A | 3 |
| Dropout Voltage (VIN, VOUT) | VDO | 185 | 300 | mV | IL = 1.0A | 3 | |
| Dropout Voltage (VIN, VOUT) | VDO | 250 | 500 | mV | IL = 1.5A | 3 | |
| Ground Pin Current | IGND | 7.5 | 20 | mA | IL = 0.5A | 3 | |
| Ground Pin Current | IGND | 20 | 35 | mA | IL = 1.5A | 3 | |
| Current Limit | ILIM | 1.7 | 2.6 | A | VOUT = 0V | 3 | |
| Start-Up Time | tSTART | 10 | 150 | µs | VEN = VIN | 3 | |
| Enable Input Threshold (regulator enable) | VEN | 0.8 | V | Regulator enable | 3 | ||
| Enable Input Threshold (regulator shutdown) | VEN | 0.2 | V | Regulator shutdown | 3 | ||
| Flag Threshold | VFLG | 7.5 | 10 | 14 | % | % of VOUT below nominal (falling) | 4 |
| Minimum Load Current | 10 | mA | Minimum load current necessary for proper operation | 10 | |||
| Adjustable Output Voltage Range | VOUT | 0.5 | 5.5 | V | Set with two resistors (application text, Section 4.5) | 10 | |
| Storage Temperature Range | TS | -65 | 125 | °C | 5 | ||
| Junction Temperature Range | TJ | -40 | 125 | °C | 5 | ||
| Supply Input Voltage | VIN | 6 | V | 3 | |||
| Flag Pin Voltage | FLG | 6 | V | 3 | |||
| Supply Voltage (operating) | VIN | 1.65 | 5.5 | V | 3 | ||
| Enable Input Voltage (operating) | VEN | 0 | V | Printed as 0V to VIN; upper bound is not numeric | 3 | ||
| ESD Rating (HBM) | 2 | kV | Human body model, 1.5 kΩ in series with 100 pF | 3 | |||
| Ground Pin Current | IGND | 1.6 | mA | IL = 10 mA | 3 | ||
| Ground Pin Current in Shutdown | ISHDN | 1 | µA | VEN = 0V | 3 | ||
| Thermal Shutdown | ThSHDN | 165 | °C | 3 | |||
| Enable Pin Input Current (shutdown) | IEN | 0.005 | µA | VIL ≤ 0.2V (Regulator shutdown) | 4 | ||
| Enable Pin Input Current (enable) | IEN | 7 | µA | VIH ≥ 0.8V (Regulator enable) | 4 | ||
| Flag Output Leakage Current | IFLG(LEAK) | 0.05 | µA | Flag off | 4 | ||
| Output Logic-Low Voltage (undervoltage) | VFLG(LO) | 150 | mV | IL = 5 mA | 4 | ||
| Flag Hysteresis | 2 | % | 4 | ||||
| Thermal Resistance, ePAD SOIC-8 (junction to air) | JA | 41 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
MIC69153YME-TR - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm - 3D model: SOIC-8-EP (KiCad packages3D, STEP)
- 3D model files:
mic69153yme-tr-etched.step/mic69153yme-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic69153yme-tr.step/mic69153yme-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (22 pp, sha256
64e663a98a2e82f3, retrieved 2026-10-20, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).