main
Ray
Publish 0.1.0
f238648
MIC5367-1.2YMT-TR
Microchip Tech · Linear Voltage Regulators (LDO) · MLF-6(1.6x1.6)
MIC5367-1.2YMT-TR from Microchip Tech, in a MLF-6(1.6x1.6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Enable input, active high (High = ON, Low = OFF); do not leave floating. |
| 2 | GND | power_in | Ground. |
| 3 | VIN | power_in | Supply input, 2.5V to 5.5V operating range. |
| 4 | VOUT | power_out | Regulated output voltage, 200mA peak (150mA continuous), requires 1µF or greater output capacitor. |
| 5 | NC | unconnected | No connect, not internally connected. |
| 6 | NC | unconnected | No connect, not internally connected. |
| 7 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MLF-6(1.6x1.6) |
| Category | Power Management |
| Pins | 7 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy | VOUT | -2 | 2 | % | Variation from nominal VOUT | 4 | |
| Output Voltage Accuracy over temperature | VOUT | -3 | 3 | % | Variation from nominal VOUT; -40°C to +125°C | 4 | |
| Line Regulation | 0.02 | 0.3 | % | VIN = VOUT +1V to 5.5V; IOUT = 100µA | 4 | ||
| Load Regulation | 0.3 | 1 | % | IOUT = 100µA to 150mA | 4 | ||
| Dropout Voltage | 60 | 135 | mV | IOUT = 50mA | 4 | ||
| Dropout Voltage | 180 | 380 | mV | IOUT = 150mA | 4 | ||
| Ground Pin Current | IGND | 29 | 39 | µA | IOUT = 0mA | 4 | |
| Ground Pin Current in Shutdown | 0.05 | 1 | µA | VEN ≤ 0.2V | 4 | ||
| Current Limit | 200 | 325 | 550 | mA | VOUT = 0V | 4 | |
| Enable Input Voltage Logic Low | VEN | 0.2 | V | Logic Low | 4 | ||
| Enable Input Voltage Logic High | VEN | 1.2 | V | Logic High | 4 | ||
| Enable Input Current | 0.01 | 1 | µA | VIL ≤ 0.2V | 4 | ||
| Turn-on Time | 50 | 125 | µs | COUT = 1µF; IOUT = 150mA | 4 | ||
| Ripple Rejection | PSRR | 65 | dB | f = up to 1kHz; COUT = 1µF | 4 | ||
| Ripple Rejection | PSRR | 55 | dB | f = 1kHz, 10kHz; COUT = 1µF | 4 | ||
| Output Voltage Noise | 200 | µVRMS | COUT = 1µF, 10Hz to 100kHz | 4 | |||
| Supply Voltage (absolute maximum) | VIN | 0 | 6 | V | 4 | ||
| Enable Voltage (absolute maximum) | VEN | 0 | V | 0V to VIN | 4 | ||
| Lead Temperature (soldering, 10sec) | 260 | °C | 4 | ||||
| Junction Temperature (absolute maximum) | TJ | -40 | 150 | °C | 4 | ||
| Storage Temperature | Ts | -65 | 150 | °C | 4 | ||
| ESD Rating | 2 | kV | Human body model, 1.5kΩ in series with 100pF | 4 | |||
| Supply Voltage (operating) | VIN | 2.5 | 5.5 | V | 4 | ||
| Enable Voltage (operating) | VEN | 0 | V | 0V to VIN | 4 | ||
| Junction Temperature (operating) | TJ | -40 | 125 | °C | 4 |
CAD (KiCad official)
- Symbol:
MIC5367-1.2YMT-TR - Footprint:
Package_DFN_QFN:MLF-6-1EP_1.6x1.6mm_P0.5mm_EP0.5x1.26mm - 3D model: MLF-6(1.6x1.6) (KiCad packages3D, STEP)
- 3D model files:
mic5367-1-2ymt-tr-etched.step/mic5367-1-2ymt-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic5367-1-2ymt-tr.step/mic5367-1-2ymt-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (11 pp, sha256
d0c966989776da38, retrieved 2026-10-30, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MIC5367-1.2YMT-TR
**Microchip Tech** · Linear Voltage Regulators (LDO) · MLF-6(1.6x1.6)
MIC5367-1.2YMT-TR from Microchip Tech, in a MLF-6(1.6x1.6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Enable input, active high (High = ON, Low = OFF); do not leave floating. |
| 2 | GND | power_in | Ground. |
| 3 | VIN | power_in | Supply input, 2.5V to 5.5V operating range. |
| 4 | VOUT | power_out | Regulated output voltage, 200mA peak (150mA continuous), requires 1µF or greater output capacitor. |
| 5 | NC | unconnected | No connect, not internally connected. |
| 6 | NC | unconnected | No connect, not internally connected. |
| 7 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MLF-6(1.6x1.6) |
| Category | Power Management |
| Pins | 7 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy | VOUT | -2 | | 2 | % | Variation from nominal VOUT | 4 |
| Output Voltage Accuracy over temperature | VOUT | -3 | | 3 | % | Variation from nominal VOUT; -40°C to +125°C | 4 |
| Line Regulation | | | 0.02 | 0.3 | % | VIN = VOUT +1V to 5.5V; IOUT = 100µA | 4 |
| Load Regulation | | | 0.3 | 1 | % | IOUT = 100µA to 150mA | 4 |
| Dropout Voltage | | | 60 | 135 | mV | IOUT = 50mA | 4 |
| Dropout Voltage | | | 180 | 380 | mV | IOUT = 150mA | 4 |
| Ground Pin Current | IGND | | 29 | 39 | µA | IOUT = 0mA | 4 |
| Ground Pin Current in Shutdown | | | 0.05 | 1 | µA | VEN ≤ 0.2V | 4 |
| Current Limit | | 200 | 325 | 550 | mA | VOUT = 0V | 4 |
| Enable Input Voltage Logic Low | VEN | | | 0.2 | V | Logic Low | 4 |
| Enable Input Voltage Logic High | VEN | 1.2 | | | V | Logic High | 4 |
| Enable Input Current | | | 0.01 | 1 | µA | VIL ≤ 0.2V | 4 |
| Turn-on Time | | | 50 | 125 | µs | COUT = 1µF; IOUT = 150mA | 4 |
| Ripple Rejection | PSRR | | 65 | | dB | f = up to 1kHz; COUT = 1µF | 4 |
| Ripple Rejection | PSRR | | 55 | | dB | f = 1kHz, 10kHz; COUT = 1µF | 4 |
| Output Voltage Noise | | | 200 | | µVRMS | COUT = 1µF, 10Hz to 100kHz | 4 |
| Supply Voltage (absolute maximum) | VIN | 0 | | 6 | V | | 4 |
| Enable Voltage (absolute maximum) | VEN | 0 | | | V | 0V to VIN | 4 |
| Lead Temperature (soldering, 10sec) | | | | 260 | °C | | 4 |
| Junction Temperature (absolute maximum) | TJ | -40 | | 150 | °C | | 4 |
| Storage Temperature | Ts | -65 | | 150 | °C | | 4 |
| ESD Rating | | | | 2 | kV | Human body model, 1.5kΩ in series with 100pF | 4 |
| Supply Voltage (operating) | VIN | 2.5 | | 5.5 | V | | 4 |
| Enable Voltage (operating) | VEN | 0 | | | V | 0V to VIN | 4 |
| Junction Temperature (operating) | TJ | -40 | | 125 | °C | | 4 |
## CAD (KiCad official)
- Symbol: `MIC5367-1.2YMT-TR`
- Footprint: `Package_DFN_QFN:MLF-6-1EP_1.6x1.6mm_P0.5mm_EP0.5x1.26mm`
- 3D model: MLF-6(1.6x1.6) (KiCad packages3D, STEP)
- 3D model files: `mic5367-1-2ymt-tr-etched.step` / `mic5367-1-2ymt-tr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mic5367-1-2ymt-tr.step` / `mic5367-1-2ymt-tr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/mic5367-1-2ymt-tr-datasheet.pdf) (11 pp, sha256 `d0c966989776da38`, retrieved 2026-10-30, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mic5367-1-2ymt-tr-datasheet.pdf)