Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MIC5367-1.2YMT-TR

Microchip Tech · Linear Voltage Regulators (LDO) · MLF-6(1.6x1.6)

MIC5367-1.2YMT-TR from Microchip Tech, in a MLF-6(1.6x1.6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Enable input, active high (High = ON, Low = OFF); do not leave floating.
2 GND power_in Ground.
3 VIN power_in Supply input, 2.5V to 5.5V operating range.
4 VOUT power_out Regulated output voltage, 200mA peak (150mA continuous), requires 1µF or greater output capacitor.
5 NC unconnected No connect, not internally connected.
6 NC unconnected No connect, not internally connected.
7 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package MLF-6(1.6x1.6)
Category Power Management
Pins 7

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage Accuracy VOUT -2 2 % Variation from nominal VOUT 4
Output Voltage Accuracy over temperature VOUT -3 3 % Variation from nominal VOUT; -40°C to +125°C 4
Line Regulation 0.02 0.3 % VIN = VOUT +1V to 5.5V; IOUT = 100µA 4
Load Regulation 0.3 1 % IOUT = 100µA to 150mA 4
Dropout Voltage 60 135 mV IOUT = 50mA 4
Dropout Voltage 180 380 mV IOUT = 150mA 4
Ground Pin Current IGND 29 39 µA IOUT = 0mA 4
Ground Pin Current in Shutdown 0.05 1 µA VEN ≤ 0.2V 4
Current Limit 200 325 550 mA VOUT = 0V 4
Enable Input Voltage Logic Low VEN 0.2 V Logic Low 4
Enable Input Voltage Logic High VEN 1.2 V Logic High 4
Enable Input Current 0.01 1 µA VIL ≤ 0.2V 4
Turn-on Time 50 125 µs COUT = 1µF; IOUT = 150mA 4
Ripple Rejection PSRR 65 dB f = up to 1kHz; COUT = 1µF 4
Ripple Rejection PSRR 55 dB f = 1kHz, 10kHz; COUT = 1µF 4
Output Voltage Noise 200 µVRMS COUT = 1µF, 10Hz to 100kHz 4
Supply Voltage (absolute maximum) VIN 0 6 V 4
Enable Voltage (absolute maximum) VEN 0 V 0V to VIN 4
Lead Temperature (soldering, 10sec) 260 °C 4
Junction Temperature (absolute maximum) TJ -40 150 °C 4
Storage Temperature Ts -65 150 °C 4
ESD Rating 2 kV Human body model, 1.5kΩ in series with 100pF 4
Supply Voltage (operating) VIN 2.5 5.5 V 4
Enable Voltage (operating) VEN 0 V 0V to VIN 4
Junction Temperature (operating) TJ -40 125 °C 4

CAD (KiCad official)

  • Symbol: MIC5367-1.2YMT-TR
  • Footprint: Package_DFN_QFN:MLF-6-1EP_1.6x1.6mm_P0.5mm_EP0.5x1.26mm
  • 3D model: MLF-6(1.6x1.6) (KiCad packages3D, STEP)
  • 3D model files: mic5367-1-2ymt-tr-etched.step / mic5367-1-2ymt-tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic5367-1-2ymt-tr.step / mic5367-1-2ymt-tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (11 pp, sha256 d0c966989776da38, retrieved 2026-10-30, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF