main
Ray
Publish 0.1.0
dd43828
MIC5239-3.0YMM
Microchip Tech · Pre-ordered MCUs · MSOP-8
MIC5239-3.0YMM from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Enable input: logic low = shutdown, logic high = enabled. |
| 2 | FLG | output | Error flag open-collector output, active low when the output is out of regulation due to insufficient input voltage or excessive load; an external pull-up resistor is required. |
| 3 | IN | power_in | Power supply input to the regulator. |
| 4 | OUT | power_out | Regulated output of the LDO. |
| 5 | GND | power_in | Ground; pins 5, 6, 7 and 8 are internally connected in common via the leadframe. |
| 6 | GND | power_in | Ground; pins 5, 6, 7 and 8 are internally connected in common via the leadframe. |
| 7 | GND | power_in | Ground; pins 5, 6, 7 and 8 are internally connected in common via the leadframe. |
| 8 | GND | power_in | Ground; pins 5, 6, 7 and 8 are internally connected in common via the leadframe. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MSOP-8 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy | VOUT | -1 | 1 | % | Variation from nominal VOUT; TJ = 25°C | 4 | |
| Output Voltage Accuracy | VOUT | -2 | 2 | % | Variation from nominal VOUT; -40°C ≤ TJ ≤ +125°C | 4 | |
| Dropout Voltage | ΔV | 260 | 350 | mV | IOUT = 150mA; TJ = 25°C | 4 | |
| Dropout Voltage | ΔV | 400 | mV | IOUT = 150mA; -40°C ≤ TJ ≤ +125°C | 4 | ||
| Enable Input Low Voltage | VIL | 0.6 | V | Regulator off | 4 | ||
| Enable Input High Voltage | VIH | 2 | V | Regulator on | 4 | ||
| Enable Input Current | IIN | -1 | 0.01 | 1 | µA | VEN = 0.6V, regulator off; TJ = 25°C | 4 |
| Enable Input Current | IIN | -2 | 0.01 | 2 | µA | VEN = 0.6V, regulator off; -40°C ≤ TJ ≤ +125°C | 4 |
| Enable Input Current | IIN | 0.15 | 1 | µA | VEN = 2.0V, regulator on; TJ = 25°C | 4 | |
| Enable Input Current | IIN | 0.15 | 2 | µA | VEN = 2.0V, regulator on; -40°C ≤ TJ ≤ +125°C | 4 | |
| Enable Input Current | IIN | 0.5 | 2.5 | µA | VEN = 30V, regulator on; TJ = 25°C | 4 | |
| Enable Input Current | IIN | 0.5 | 5 | µA | VEN = 30V, regulator on; -40°C ≤ TJ ≤ +125°C | 4 | |
| Line Regulation | ΔVOUT/VOUT | 0.06 | 0.5 | % | VIN = VOUT +1V to 30V | 4 | |
| Load Regulation | ΔVOUT/VOUT | 15 | 30 | mV | IOUT = 100µA to 500mA | 4 | |
| Dropout Voltage | ΔV | 50 | mV | IOUT = 100µA | 4 | ||
| Dropout Voltage | ΔV | 350 | mV | IOUT = 500mA | 4 | ||
| Ground Pin Current | IGND | 23 | 40 | µA | VEN ≥ 2.0V, IOUT = 100µA; TJ = 25°C | 4 | |
| Ground Pin Current | IGND | 23 | 45 | µA | VEN ≥ 2.0V, IOUT = 100µA; -40°C ≤ TJ ≤ +125°C | 4 | |
| Ground Pin Current | IGND | 1.3 | 5 | mA | VEN ≥ 2.0V, IOUT = 150mA | 4 | |
| Ground Pin Current | IGND | 8.5 | 15 | mA | VEN ≥ 2.0V, IOUT = 500mA | 4 | |
| Ground Pin Shutdown Current | IGND(SHDN) | 0.1 | 1 | µA | VEN ≤ 0.6V, VIN = 30V | 4 | |
| Short Circuit Current | ISC | 850 | 1200 | mA | VOUT = 0V | 4 | |
| Output Noise | en | 160 | µVrms | 10Hz to 100kHz, VOUT = 3.0V, CL = 3.3µF | 4 | ||
| FLAG Low Threshold | VFLG | 94 | % of VOUT | Low threshold | 4 | ||
| FLAG High Threshold | VFLG | 95 | % of VOUT | High threshold | 4 | ||
| FLAG Output Low Voltage | VOL | 150 | mV | VIN = VOUT(nom), 0.12VOUT, IOL = 200µA | 4 | ||
| FLAG Output Leakage | ILEAK | 0.1 | µA | VOH = 30V | 4 | ||
| Supply Voltage (Operating) | VIN | 2.3 | 30 | V | Operating ratings | 4 | |
| Enable Input Voltage (Operating) | VEN | 0 | 30 | V | Operating ratings | 4 | |
| Junction Temperature (Operating) | TJ | -40 | 125 | °C | Operating ratings | 4 | |
| Supply Voltage (Absolute Maximum) | VIN | -20 | 32 | V | Absolute maximum ratings | 4 | |
| Enable Input Voltage (Absolute Maximum) | VEN | -0.3 | 32 | V | Absolute maximum ratings | 4 | |
| Junction Temperature (Absolute Maximum) | TJ | -40 | 125 | °C | Absolute maximum ratings | 4 | |
| Storage Temperature | TS | -65 | 150 | °C | Absolute maximum ratings | 4 | |
| Lead Temperature (soldering, 5 sec) | 260 | °C | Soldering, 5 sec | 4 | |||
| ESD Rating (MSOP-8L, HBM) | 1.5 | kV | Human body model, MSOP-8L | 4 | |||
| Package Thermal Resistance MSOP (θJA) | θJA | 80 | °C/W | MSOP-8 package | 4 |
CAD (KiCad official)
- Symbol:
MIC5239-3.0YMM - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
mic5239-3-0ymm-etched.step/mic5239-3-0ymm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic5239-3-0ymm.step/mic5239-3-0ymm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (14 pp, sha256
2ce7b3cb44b7f5e7, retrieved 2026-10-28, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MIC5239-3.0YMM
**Microchip Tech** · Pre-ordered MCUs · MSOP-8
MIC5239-3.0YMM from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Enable input: logic low = shutdown, logic high = enabled. |
| 2 | FLG | output | Error flag open-collector output, active low when the output is out of regulation due to insufficient input voltage or excessive load; an external pull-up resistor is required. |
| 3 | IN | power_in | Power supply input to the regulator. |
| 4 | OUT | power_out | Regulated output of the LDO. |
| 5 | GND | power_in | Ground; pins 5, 6, 7 and 8 are internally connected in common via the leadframe. |
| 6 | GND | power_in | Ground; pins 5, 6, 7 and 8 are internally connected in common via the leadframe. |
| 7 | GND | power_in | Ground; pins 5, 6, 7 and 8 are internally connected in common via the leadframe. |
| 8 | GND | power_in | Ground; pins 5, 6, 7 and 8 are internally connected in common via the leadframe. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MSOP-8 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy | VOUT | -1 | | 1 | % | Variation from nominal VOUT; TJ = 25°C | 4 |
| Output Voltage Accuracy | VOUT | -2 | | 2 | % | Variation from nominal VOUT; -40°C ≤ TJ ≤ +125°C | 4 |
| Dropout Voltage | ΔV | | 260 | 350 | mV | IOUT = 150mA; TJ = 25°C | 4 |
| Dropout Voltage | ΔV | | | 400 | mV | IOUT = 150mA; -40°C ≤ TJ ≤ +125°C | 4 |
| Enable Input Low Voltage | VIL | | | 0.6 | V | Regulator off | 4 |
| Enable Input High Voltage | VIH | 2 | | | V | Regulator on | 4 |
| Enable Input Current | IIN | -1 | 0.01 | 1 | µA | VEN = 0.6V, regulator off; TJ = 25°C | 4 |
| Enable Input Current | IIN | -2 | 0.01 | 2 | µA | VEN = 0.6V, regulator off; -40°C ≤ TJ ≤ +125°C | 4 |
| Enable Input Current | IIN | | 0.15 | 1 | µA | VEN = 2.0V, regulator on; TJ = 25°C | 4 |
| Enable Input Current | IIN | | 0.15 | 2 | µA | VEN = 2.0V, regulator on; -40°C ≤ TJ ≤ +125°C | 4 |
| Enable Input Current | IIN | | 0.5 | 2.5 | µA | VEN = 30V, regulator on; TJ = 25°C | 4 |
| Enable Input Current | IIN | | 0.5 | 5 | µA | VEN = 30V, regulator on; -40°C ≤ TJ ≤ +125°C | 4 |
| Line Regulation | ΔVOUT/VOUT | | 0.06 | 0.5 | % | VIN = VOUT +1V to 30V | 4 |
| Load Regulation | ΔVOUT/VOUT | | 15 | 30 | mV | IOUT = 100µA to 500mA | 4 |
| Dropout Voltage | ΔV | | 50 | | mV | IOUT = 100µA | 4 |
| Dropout Voltage | ΔV | | 350 | | mV | IOUT = 500mA | 4 |
| Ground Pin Current | IGND | | 23 | 40 | µA | VEN ≥ 2.0V, IOUT = 100µA; TJ = 25°C | 4 |
| Ground Pin Current | IGND | | 23 | 45 | µA | VEN ≥ 2.0V, IOUT = 100µA; -40°C ≤ TJ ≤ +125°C | 4 |
| Ground Pin Current | IGND | | 1.3 | 5 | mA | VEN ≥ 2.0V, IOUT = 150mA | 4 |
| Ground Pin Current | IGND | | 8.5 | 15 | mA | VEN ≥ 2.0V, IOUT = 500mA | 4 |
| Ground Pin Shutdown Current | IGND(SHDN) | | 0.1 | 1 | µA | VEN ≤ 0.6V, VIN = 30V | 4 |
| Short Circuit Current | ISC | | 850 | 1200 | mA | VOUT = 0V | 4 |
| Output Noise | en | | 160 | | µVrms | 10Hz to 100kHz, VOUT = 3.0V, CL = 3.3µF | 4 |
| FLAG Low Threshold | VFLG | | 94 | | % of VOUT | Low threshold | 4 |
| FLAG High Threshold | VFLG | | 95 | | % of VOUT | High threshold | 4 |
| FLAG Output Low Voltage | VOL | | 150 | | mV | VIN = VOUT(nom), 0.12VOUT, IOL = 200µA | 4 |
| FLAG Output Leakage | ILEAK | | 0.1 | | µA | VOH = 30V | 4 |
| Supply Voltage (Operating) | VIN | 2.3 | | 30 | V | Operating ratings | 4 |
| Enable Input Voltage (Operating) | VEN | 0 | | 30 | V | Operating ratings | 4 |
| Junction Temperature (Operating) | TJ | -40 | | 125 | °C | Operating ratings | 4 |
| Supply Voltage (Absolute Maximum) | VIN | -20 | | 32 | V | Absolute maximum ratings | 4 |
| Enable Input Voltage (Absolute Maximum) | VEN | -0.3 | | 32 | V | Absolute maximum ratings | 4 |
| Junction Temperature (Absolute Maximum) | TJ | -40 | | 125 | °C | Absolute maximum ratings | 4 |
| Storage Temperature | TS | -65 | | 150 | °C | Absolute maximum ratings | 4 |
| Lead Temperature (soldering, 5 sec) | | | | 260 | °C | Soldering, 5 sec | 4 |
| ESD Rating (MSOP-8L, HBM) | | | | 1.5 | kV | Human body model, MSOP-8L | 4 |
| Package Thermal Resistance MSOP (θJA) | θJA | | 80 | | °C/W | MSOP-8 package | 4 |
## CAD (KiCad official)
- Symbol: `MIC5239-3.0YMM`
- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`
- 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files: `mic5239-3-0ymm-etched.step` / `mic5239-3-0ymm-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mic5239-3-0ymm.step` / `mic5239-3-0ymm.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/mic5239-3-0ymm-datasheet.pdf) (14 pp, sha256 `2ce7b3cb44b7f5e7`, retrieved 2026-10-28, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mic5239-3-0ymm-datasheet.pdf)