main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mic5239-3-0ymm: viewers · Ray
mic5239-3-0ymm-etched.glb Publish 0.1.0 · Ray
mic5239-3-0ymm-etched.step mic5239-3-0ymm: factory component page (tier=lcsc) · Ray
mic5239-3-0ymm-hero.glb mic5239-3-0ymm: hero GLB from the etched model (keeps the MPN mark) · Ray
mic5239-3-0ymm-hero.overlay.json Publish 0.1.0 · Ray
mic5239-3-0ymm.glb Publish 0.1.0 · Ray
mic5239-3-0ymm.kicad_mod Publish 0.1.0 · Ray
mic5239-3-0ymm.kicad_sym Publish 0.1.0 · Ray
mic5239-3-0ymm.lbr Publish 0.1.0 · Ray
mic5239-3-0ymm.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

MIC5239-3.0YMM

Microchip Tech · Pre-ordered MCUs · MSOP-8

MIC5239-3.0YMM from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Enable input: logic low = shutdown, logic high = enabled.
2 FLG output Error flag open-collector output, active low when the output is out of regulation due to insufficient input voltage or excessive load; an external pull-up resistor is required.
3 IN power_in Power supply input to the regulator.
4 OUT power_out Regulated output of the LDO.
5 GND power_in Ground; pins 5, 6, 7 and 8 are internally connected in common via the leadframe.
6 GND power_in Ground; pins 5, 6, 7 and 8 are internally connected in common via the leadframe.
7 GND power_in Ground; pins 5, 6, 7 and 8 are internally connected in common via the leadframe.
8 GND power_in Ground; pins 5, 6, 7 and 8 are internally connected in common via the leadframe.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package MSOP-8
Category Single Chip Microcomputer/Microcontroller
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage Accuracy VOUT -1 1 % Variation from nominal VOUT; TJ = 25°C 4
Output Voltage Accuracy VOUT -2 2 % Variation from nominal VOUT; -40°C ≤ TJ ≤ +125°C 4
Dropout Voltage ΔV 260 350 mV IOUT = 150mA; TJ = 25°C 4
Dropout Voltage ΔV 400 mV IOUT = 150mA; -40°C ≤ TJ ≤ +125°C 4
Enable Input Low Voltage VIL 0.6 V Regulator off 4
Enable Input High Voltage VIH 2 V Regulator on 4
Enable Input Current IIN -1 0.01 1 µA VEN = 0.6V, regulator off; TJ = 25°C 4
Enable Input Current IIN -2 0.01 2 µA VEN = 0.6V, regulator off; -40°C ≤ TJ ≤ +125°C 4
Enable Input Current IIN 0.15 1 µA VEN = 2.0V, regulator on; TJ = 25°C 4
Enable Input Current IIN 0.15 2 µA VEN = 2.0V, regulator on; -40°C ≤ TJ ≤ +125°C 4
Enable Input Current IIN 0.5 2.5 µA VEN = 30V, regulator on; TJ = 25°C 4
Enable Input Current IIN 0.5 5 µA VEN = 30V, regulator on; -40°C ≤ TJ ≤ +125°C 4
Line Regulation ΔVOUT/VOUT 0.06 0.5 % VIN = VOUT +1V to 30V 4
Load Regulation ΔVOUT/VOUT 15 30 mV IOUT = 100µA to 500mA 4
Dropout Voltage ΔV 50 mV IOUT = 100µA 4
Dropout Voltage ΔV 350 mV IOUT = 500mA 4
Ground Pin Current IGND 23 40 µA VEN ≥ 2.0V, IOUT = 100µA; TJ = 25°C 4
Ground Pin Current IGND 23 45 µA VEN ≥ 2.0V, IOUT = 100µA; -40°C ≤ TJ ≤ +125°C 4
Ground Pin Current IGND 1.3 5 mA VEN ≥ 2.0V, IOUT = 150mA 4
Ground Pin Current IGND 8.5 15 mA VEN ≥ 2.0V, IOUT = 500mA 4
Ground Pin Shutdown Current IGND(SHDN) 0.1 1 µA VEN ≤ 0.6V, VIN = 30V 4
Short Circuit Current ISC 850 1200 mA VOUT = 0V 4
Output Noise en 160 µVrms 10Hz to 100kHz, VOUT = 3.0V, CL = 3.3µF 4
FLAG Low Threshold VFLG 94 % of VOUT Low threshold 4
FLAG High Threshold VFLG 95 % of VOUT High threshold 4
FLAG Output Low Voltage VOL 150 mV VIN = VOUT(nom), 0.12VOUT, IOL = 200µA 4
FLAG Output Leakage ILEAK 0.1 µA VOH = 30V 4
Supply Voltage (Operating) VIN 2.3 30 V Operating ratings 4
Enable Input Voltage (Operating) VEN 0 30 V Operating ratings 4
Junction Temperature (Operating) TJ -40 125 °C Operating ratings 4
Supply Voltage (Absolute Maximum) VIN -20 32 V Absolute maximum ratings 4
Enable Input Voltage (Absolute Maximum) VEN -0.3 32 V Absolute maximum ratings 4
Junction Temperature (Absolute Maximum) TJ -40 125 °C Absolute maximum ratings 4
Storage Temperature TS -65 150 °C Absolute maximum ratings 4
Lead Temperature (soldering, 5 sec) 260 °C Soldering, 5 sec 4
ESD Rating (MSOP-8L, HBM) 1.5 kV Human body model, MSOP-8L 4
Package Thermal Resistance MSOP (θJA) θJA 80 °C/W MSOP-8 package 4

CAD (KiCad official)

  • Symbol: MIC5239-3.0YMM
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: mic5239-3-0ymm-etched.step / mic5239-3-0ymm-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic5239-3-0ymm.step / mic5239-3-0ymm.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (14 pp, sha256 2ce7b3cb44b7f5e7, retrieved 2026-10-28, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF