main
Ray
Publish 0.1.0
fd62244
MIC5236-5.0YMM
Microchip Tech · Pre-ordered MCUs · MSOP-8
MIC5236-5.0YMM from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | /ERR | output | Open-collector error output is active low when the output is out of regulation due to insufficient input voltage or excessive load, and requires an external pull-up resistor. |
| 2 | IN | power_in | Power supply input with an operating range of +2.3V to +30V and an absolute transient survivability of -20V to +60V. |
| 3 | OUT | power_out | Regulated output for this 5.0V fixed version, rated for 150mA and requiring a 1.0µF output capacitor for stability. |
| 4 | EN | input | Enable input: logic low (VIL max 0.6V) shuts the regulator down and logic high (VIH min 2.0V) enables it. |
| 5 | GND | power_in | Ground; pins 5, 6, 7 and 8 are internally connected in common via the leadframe. |
| 6 | GND | power_in | Ground; pins 5, 6, 7 and 8 are internally connected in common via the leadframe. |
| 7 | GND | power_in | Ground; pins 5, 6, 7 and 8 are internally connected in common via the leadframe. |
| 8 | GND | power_in | Ground; pins 5, 6, 7 and 8 are internally connected in common via the leadframe. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MSOP-8 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy | VOUT | -1 | 1 | % | variation from nominal VOUT | 3 | |
| Output Voltage Accuracy | VOUT | -2 | 2 | % | 3 | ||
| Output Voltage Temperature Coefficient | ΔVOUT/ΔT | 50 | ppm/°C | Note 6 | 3 | ||
| Line Regulation | ΔVOUT/VOUT | 0.2 | 0.5 | % | VIN = VOUT + 1V to 30V | 3 | |
| Line Regulation | ΔVOUT/VOUT | 1 | % | 3 | |||
| Load Regulation | ΔVOUT/VOUT | 0.15 | 0.3 | % | IOUT = 100µA to 50mA, Note 7 | 3 | |
| Load Regulation | ΔVOUT/VOUT | 0.5 | % | 3 | |||
| Load Regulation | ΔVOUT/VOUT | 0.3 | 0.6 | % | IOUT = 100µA to 150mA, Note 7 | 3 | |
| Load Regulation | ΔVOUT/VOUT | 1 | % | 3 | |||
| Dropout Voltage | ΔV | 50 | 100 | mV | IOUT = 100µA, Note 8 | 3 | |
| Dropout Voltage | ΔV | 230 | 400 | mV | IOUT = 50mA | 3 | |
| Dropout Voltage | ΔV | 270 | mV | IOUT = 100mA | 3 | ||
| Dropout Voltage | ΔV | 300 | 500 | mV | IOUT = 150mA | 3 | |
| Ground Pin Current | IGND | 20 | 30 | µA | VEN ≥ 2.0V, IOUT = 100µA | 3 | |
| Ground Pin Current | IGND | 0.5 | 0.8 | mA | VEN ≥ 2.0V, IOUT = 50mA | 3 | |
| Ground Pin Current | IGND | 1.5 | mA | VEN ≥ 2.0V, IOUT = 100mA | 3 | ||
| Ground Pin Current | IGND | 2.8 | 4 | mA | VEN ≥ 2.0V, IOUT = 150mA | 3 | |
| Ground Pin Current | IGND | 5 | mA | 3 | |||
| Ground Pin in Shutdown | IGND(SHDN) | 0.1 | 1 | µA | VEN ≤ 0.6V, VIN = 30V | 3 | |
| Short Circuit Current | ISC | 260 | 350 | mA | VOUT = 0V | 3 | |
| Output Noise | en | 160 | µVrms | 10Hz to 100kHz, VOUT = 3.0V, CL = 1.0µF | 3 | ||
| ERR Low Threshold | VTH/ERR | 90 | 94 | % | % of VOUT | 3 | |
| ERR High Threshold | VTH/ERR | 95 | 98 | % | % of VOUT | 3 | |
| ERR Output Low Voltage | VOL | 150 | 250 | mV | VIN = VOUT(nom), 0.12VOUT, IOL = 200µA | 3 | |
| ERR Output Low Voltage | VOL | 400 | mV | 3 | |||
| ERR Output Leakage | ILEAK | 0.1 | 1 | µA | VOH = 30V | 3 | |
| ERR Output Leakage | ILEAK | 2 | µA | 3 | |||
| Input Low Voltage | VIL | 0.6 | V | regulator off | 3 | ||
| Input High Voltage | VIH | 2 | V | regulator on | 3 | ||
| Enable Input Current | IIN | 0.01 | 1 | µA | VEN = 0.6V, regulator off | 4 | |
| Enable Input Current | IIN | 2 | µA | 4 | |||
| Enable Input Current | IIN | 0.15 | 1 | µA | VEN = 2.0V, regulator on | 4 | |
| Enable Input Current | IIN | 0.5 | 2.5 | µA | VEN = 30V, regulator on | 4 | |
| Enable Input Current | IIN | 5 | µA | 4 | |||
| Supply Voltage (VIN) | VIN | -20 | 60 | V | Note 3 | 3 | |
| Junction Temperature | TJ | 150 | °C | 3 | |||
| Storage Temperature | TS | -65 | 150 | °C | 3 | ||
| Lead Temperature | 260 | °C | soldering, 5 sec. | 3 | |||
| Supply Voltage (VIN) | VIN | 2.3 | 30 | V | 3 | ||
| Junction Temperature | TJ | -40 | 125 | °C | 3 | ||
| Package Thermal Resistance MSOP | θJA | 80 | °C/W | MSOP | 3 |
CAD (KiCad official)
- Symbol:
MIC5236-5.0YMM - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
mic5236-5-0ymm-etched.step/mic5236-5-0ymm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic5236-5-0ymm.step/mic5236-5-0ymm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (12 pp, sha256
dab9c0775d086119, retrieved 2026-10-28, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MIC5236-5.0YMM
**Microchip Tech** · Pre-ordered MCUs · MSOP-8
MIC5236-5.0YMM from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | /ERR | output | Open-collector error output is active low when the output is out of regulation due to insufficient input voltage or excessive load, and requires an external pull-up resistor. |
| 2 | IN | power_in | Power supply input with an operating range of +2.3V to +30V and an absolute transient survivability of -20V to +60V. |
| 3 | OUT | power_out | Regulated output for this 5.0V fixed version, rated for 150mA and requiring a 1.0µF output capacitor for stability. |
| 4 | EN | input | Enable input: logic low (VIL max 0.6V) shuts the regulator down and logic high (VIH min 2.0V) enables it. |
| 5 | GND | power_in | Ground; pins 5, 6, 7 and 8 are internally connected in common via the leadframe. |
| 6 | GND | power_in | Ground; pins 5, 6, 7 and 8 are internally connected in common via the leadframe. |
| 7 | GND | power_in | Ground; pins 5, 6, 7 and 8 are internally connected in common via the leadframe. |
| 8 | GND | power_in | Ground; pins 5, 6, 7 and 8 are internally connected in common via the leadframe. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MSOP-8 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy | VOUT | -1 | | 1 | % | variation from nominal VOUT | 3 |
| Output Voltage Accuracy | VOUT | -2 | | 2 | % | | 3 |
| Output Voltage Temperature Coefficient | ΔVOUT/ΔT | | | 50 | ppm/°C | Note 6 | 3 |
| Line Regulation | ΔVOUT/VOUT | | 0.2 | 0.5 | % | VIN = VOUT + 1V to 30V | 3 |
| Line Regulation | ΔVOUT/VOUT | | | 1 | % | | 3 |
| Load Regulation | ΔVOUT/VOUT | | 0.15 | 0.3 | % | IOUT = 100µA to 50mA, Note 7 | 3 |
| Load Regulation | ΔVOUT/VOUT | | | 0.5 | % | | 3 |
| Load Regulation | ΔVOUT/VOUT | | 0.3 | 0.6 | % | IOUT = 100µA to 150mA, Note 7 | 3 |
| Load Regulation | ΔVOUT/VOUT | | | 1 | % | | 3 |
| Dropout Voltage | ΔV | | 50 | 100 | mV | IOUT = 100µA, Note 8 | 3 |
| Dropout Voltage | ΔV | | 230 | 400 | mV | IOUT = 50mA | 3 |
| Dropout Voltage | ΔV | | 270 | | mV | IOUT = 100mA | 3 |
| Dropout Voltage | ΔV | | 300 | 500 | mV | IOUT = 150mA | 3 |
| Ground Pin Current | IGND | | 20 | 30 | µA | VEN ≥ 2.0V, IOUT = 100µA | 3 |
| Ground Pin Current | IGND | | 0.5 | 0.8 | mA | VEN ≥ 2.0V, IOUT = 50mA | 3 |
| Ground Pin Current | IGND | | 1.5 | | mA | VEN ≥ 2.0V, IOUT = 100mA | 3 |
| Ground Pin Current | IGND | | 2.8 | 4 | mA | VEN ≥ 2.0V, IOUT = 150mA | 3 |
| Ground Pin Current | IGND | | | 5 | mA | | 3 |
| Ground Pin in Shutdown | IGND(SHDN) | | 0.1 | 1 | µA | VEN ≤ 0.6V, VIN = 30V | 3 |
| Short Circuit Current | ISC | | 260 | 350 | mA | VOUT = 0V | 3 |
| Output Noise | en | | 160 | | µVrms | 10Hz to 100kHz, VOUT = 3.0V, CL = 1.0µF | 3 |
| ERR Low Threshold | VTH/ERR | | 90 | 94 | % | % of VOUT | 3 |
| ERR High Threshold | VTH/ERR | | 95 | 98 | % | % of VOUT | 3 |
| ERR Output Low Voltage | VOL | | 150 | 250 | mV | VIN = VOUT(nom), 0.12VOUT, IOL = 200µA | 3 |
| ERR Output Low Voltage | VOL | | | 400 | mV | | 3 |
| ERR Output Leakage | ILEAK | | 0.1 | 1 | µA | VOH = 30V | 3 |
| ERR Output Leakage | ILEAK | | | 2 | µA | | 3 |
| Input Low Voltage | VIL | | | 0.6 | V | regulator off | 3 |
| Input High Voltage | VIH | 2 | | | V | regulator on | 3 |
| Enable Input Current | IIN | | 0.01 | 1 | µA | VEN = 0.6V, regulator off | 4 |
| Enable Input Current | IIN | | | 2 | µA | | 4 |
| Enable Input Current | IIN | | 0.15 | 1 | µA | VEN = 2.0V, regulator on | 4 |
| Enable Input Current | IIN | | 0.5 | 2.5 | µA | VEN = 30V, regulator on | 4 |
| Enable Input Current | IIN | | | 5 | µA | | 4 |
| Supply Voltage (VIN) | VIN | -20 | | 60 | V | Note 3 | 3 |
| Junction Temperature | TJ | | | 150 | °C | | 3 |
| Storage Temperature | TS | -65 | | 150 | °C | | 3 |
| Lead Temperature | | | | 260 | °C | soldering, 5 sec. | 3 |
| Supply Voltage (VIN) | VIN | 2.3 | | 30 | V | | 3 |
| Junction Temperature | TJ | -40 | | 125 | °C | | 3 |
| Package Thermal Resistance MSOP | θJA | | 80 | | °C/W | MSOP | 3 |
## CAD (KiCad official)
- Symbol: `MIC5236-5.0YMM`
- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`
- 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files: `mic5236-5-0ymm-etched.step` / `mic5236-5-0ymm-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mic5236-5-0ymm.step` / `mic5236-5-0ymm.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/mic5236-5-0ymm-datasheet.pdf) (12 pp, sha256 `dab9c0775d086119`, retrieved 2026-10-28, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mic5236-5-0ymm-datasheet.pdf)