main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mic5236-5-0ymm: viewers · Ray
mic5236-5-0ymm-etched.glb Publish 0.1.0 · Ray
mic5236-5-0ymm-etched.step mic5236-5-0ymm: factory component page (tier=lcsc) · Ray
mic5236-5-0ymm-hero.glb mic5236-5-0ymm: hero GLB from the etched model (keeps the MPN mark) · Ray
mic5236-5-0ymm-hero.overlay.json Publish 0.1.0 · Ray
mic5236-5-0ymm.glb Publish 0.1.0 · Ray
mic5236-5-0ymm.kicad_mod Publish 0.1.0 · Ray
mic5236-5-0ymm.kicad_sym Publish 0.1.0 · Ray
mic5236-5-0ymm.lbr Publish 0.1.0 · Ray
mic5236-5-0ymm.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

MIC5236-5.0YMM

Microchip Tech · Pre-ordered MCUs · MSOP-8

MIC5236-5.0YMM from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 /ERR output Open-collector error output is active low when the output is out of regulation due to insufficient input voltage or excessive load, and requires an external pull-up resistor.
2 IN power_in Power supply input with an operating range of +2.3V to +30V and an absolute transient survivability of -20V to +60V.
3 OUT power_out Regulated output for this 5.0V fixed version, rated for 150mA and requiring a 1.0µF output capacitor for stability.
4 EN input Enable input: logic low (VIL max 0.6V) shuts the regulator down and logic high (VIH min 2.0V) enables it.
5 GND power_in Ground; pins 5, 6, 7 and 8 are internally connected in common via the leadframe.
6 GND power_in Ground; pins 5, 6, 7 and 8 are internally connected in common via the leadframe.
7 GND power_in Ground; pins 5, 6, 7 and 8 are internally connected in common via the leadframe.
8 GND power_in Ground; pins 5, 6, 7 and 8 are internally connected in common via the leadframe.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package MSOP-8
Category Single Chip Microcomputer/Microcontroller
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage Accuracy VOUT -1 1 % variation from nominal VOUT 3
Output Voltage Accuracy VOUT -2 2 % 3
Output Voltage Temperature Coefficient ΔVOUT/ΔT 50 ppm/°C Note 6 3
Line Regulation ΔVOUT/VOUT 0.2 0.5 % VIN = VOUT + 1V to 30V 3
Line Regulation ΔVOUT/VOUT 1 % 3
Load Regulation ΔVOUT/VOUT 0.15 0.3 % IOUT = 100µA to 50mA, Note 7 3
Load Regulation ΔVOUT/VOUT 0.5 % 3
Load Regulation ΔVOUT/VOUT 0.3 0.6 % IOUT = 100µA to 150mA, Note 7 3
Load Regulation ΔVOUT/VOUT 1 % 3
Dropout Voltage ΔV 50 100 mV IOUT = 100µA, Note 8 3
Dropout Voltage ΔV 230 400 mV IOUT = 50mA 3
Dropout Voltage ΔV 270 mV IOUT = 100mA 3
Dropout Voltage ΔV 300 500 mV IOUT = 150mA 3
Ground Pin Current IGND 20 30 µA VEN ≥ 2.0V, IOUT = 100µA 3
Ground Pin Current IGND 0.5 0.8 mA VEN ≥ 2.0V, IOUT = 50mA 3
Ground Pin Current IGND 1.5 mA VEN ≥ 2.0V, IOUT = 100mA 3
Ground Pin Current IGND 2.8 4 mA VEN ≥ 2.0V, IOUT = 150mA 3
Ground Pin Current IGND 5 mA 3
Ground Pin in Shutdown IGND(SHDN) 0.1 1 µA VEN ≤ 0.6V, VIN = 30V 3
Short Circuit Current ISC 260 350 mA VOUT = 0V 3
Output Noise en 160 µVrms 10Hz to 100kHz, VOUT = 3.0V, CL = 1.0µF 3
ERR Low Threshold VTH/ERR 90 94 % % of VOUT 3
ERR High Threshold VTH/ERR 95 98 % % of VOUT 3
ERR Output Low Voltage VOL 150 250 mV VIN = VOUT(nom), 0.12VOUT, IOL = 200µA 3
ERR Output Low Voltage VOL 400 mV 3
ERR Output Leakage ILEAK 0.1 1 µA VOH = 30V 3
ERR Output Leakage ILEAK 2 µA 3
Input Low Voltage VIL 0.6 V regulator off 3
Input High Voltage VIH 2 V regulator on 3
Enable Input Current IIN 0.01 1 µA VEN = 0.6V, regulator off 4
Enable Input Current IIN 2 µA 4
Enable Input Current IIN 0.15 1 µA VEN = 2.0V, regulator on 4
Enable Input Current IIN 0.5 2.5 µA VEN = 30V, regulator on 4
Enable Input Current IIN 5 µA 4
Supply Voltage (VIN) VIN -20 60 V Note 3 3
Junction Temperature TJ 150 °C 3
Storage Temperature TS -65 150 °C 3
Lead Temperature 260 °C soldering, 5 sec. 3
Supply Voltage (VIN) VIN 2.3 30 V 3
Junction Temperature TJ -40 125 °C 3
Package Thermal Resistance MSOP θJA 80 °C/W MSOP 3

CAD (KiCad official)

  • Symbol: MIC5236-5.0YMM
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: mic5236-5-0ymm-etched.step / mic5236-5-0ymm-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic5236-5-0ymm.step / mic5236-5-0ymm.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (12 pp, sha256 dab9c0775d086119, retrieved 2026-10-28, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF