main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mic5236-3-0ym: viewers · Ray
mic5236-3-0ym-etched.glb mic5236-3-0ym: factory component page (tier=mfr) · Ray
mic5236-3-0ym-etched.step mic5236-3-0ym: factory component page (tier=mfr) · Ray
mic5236-3-0ym-hero.glb mic5236-3-0ym: hero GLB from the etched model (keeps the MPN mark) · Ray
mic5236-3-0ym-hero.overlay.json mic5236-3-0ym: hero GLB from the etched model (keeps the MPN mark) · Ray
mic5236-3-0ym.glb Publish 0.1.0 · Ray
mic5236-3-0ym.kicad_mod Publish 0.1.0 · Ray
mic5236-3-0ym.kicad_sym Publish 0.1.0 · Ray
mic5236-3-0ym.lbr Publish 0.1.0 · Ray
mic5236-3-0ym.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 8 pins · Ray

MIC5236-3.0YM

Microchip Tech · Linear Voltage Regulators (LDO) · SO-8

MIC5236-3.0YM from Microchip Tech, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 /ERR output Open-collector error output that is active low when the output is out of regulation due to insufficient input voltage or excessive load, and requires an external pull-up resistor (200k to 1MΩ suggested).
2 IN power_in Power supply input, specified for 2.3V to 30V continuous operation (absolute maximum -20V to +60V, with the +60V limited to ≤100ms and ≤1% duty cycle).
3 OUT power_out Regulated output, 3.0V for this fixed-voltage variant, which requires a 1.0µF output capacitor for stability.
4 EN input Enable input where logic low (VIL max 0.6V) shuts the regulator down and logic high (VIH min 2.0V) enables it.
5 GND power_in Ground; pins 5 through 8 are internally connected in common via the leadframe.
6 GND power_in Ground; pins 5 through 8 are internally connected in common via the leadframe.
7 GND power_in Ground; pins 5 through 8 are internally connected in common via the leadframe.
8 GND power_in Ground; pins 5 through 8 are internally connected in common via the leadframe.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SO-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage Accuracy VOUT -1 1 % variation from nominal VOUT; VIN = 6.0V; VEN = 2.0V; COUT = 4.7µF, IOUT = 100µA; TJ = 25°C 3
Output Voltage Accuracy VOUT -2 2 % variation from nominal VOUT; VIN = 6.0V; VEN = 2.0V; COUT = 4.7µF, IOUT = 100µA; -40°C ≤ TJ ≤ +125°C (bold) 3
Output Voltage Temperature Coefficient ΔVOUT/ΔT 50 ppm/°C Note 6 3
Line Regulation ΔVOUT/VOUT 0.2 0.5 % VIN = VOUT + 1V to 30V 3
Line Regulation ΔVOUT/VOUT 1 % VIN = VOUT + 1V to 30V 3
Load Regulation ΔVOUT/VOUT 0.15 0.3 % IOUT = 100µA to 50mA, Note 7 3
Load Regulation ΔVOUT/VOUT 0.5 % IOUT = 100µA to 50mA, Note 7 3
Load Regulation ΔVOUT/VOUT 0.3 0.6 % IOUT = 100µA to 150mA, Note 7 3
Load Regulation ΔVOUT/VOUT 1 % IOUT = 100µA to 150mA, Note 7 3
Dropout Voltage ΔV 50 100 mV IOUT = 100µA, Note 8 3
Dropout Voltage ΔV 230 400 mV IOUT = 50mA, Note 8 3
Dropout Voltage ΔV 300 500 mV IOUT = 150mA, Note 8 3
Ground Pin Current IGND 20 30 µA VEN ≥ 2.0V, IOUT = 100µA 3
Ground Pin Current IGND 0.5 0.8 mA VEN ≥ 2.0V, IOUT = 50mA 3
Ground Pin Current IGND 2.8 4 mA VEN ≥ 2.0V, IOUT = 150mA 3
Ground Pin Current IGND 5 mA VEN ≥ 2.0V, IOUT = 150mA 3
Ground Pin Current in Shutdown IGND(SHDN) 0.1 1 µA VEN ≤ 0.6V, VIN = 30V 3
Short Circuit Current ISC 260 350 mA VOUT = 0V 3
Low Threshold /ERR V/ERR 90 94 % % of VOUT 3
High Threshold /ERR V/ERR 95 98 % % of VOUT 3
/ERR Output Low Voltage VOL 150 250 mV VIN = VOUT(nom), 0.12VOUT, IOL = 200µA 3
/ERR Output Low Voltage VOL 400 mV VIN = VOUT(nom), 0.12VOUT, IOL = 200µA 3
/ERR Output Leakage ILEAK 0.1 1 µA VOH = 30V 3
/ERR Output Leakage ILEAK 2 µA VOH = 30V 3
Enable Input Low Voltage VIL 0.6 V regulator off 3
Enable Input High Voltage VIH 2 V regulator on 3
Enable Input Current IIN 0.01 1 µA VEN = 0.6V, regulator off 4
Enable Input Current IIN 2 µA VEN = 0.6V, regulator off 4
Enable Input Current IIN 0.15 1 µA VEN = 2.0V, regulator on 4
Enable Input Current IIN 0.5 2.5 µA VEN = 30V, regulator on 4
Enable Input Current IIN 5 µA VEN = 30V, regulator on 4
Supply Voltage (VIN) VIN 2.3 30 V 3
Junction Temperature (TJ) TJ -40 125 °C 3
Supply Voltage (VIN) VIN -20 60 V Note 3: ≤100ms duration, ≤1% duty cycle 3
Junction Temperature (TJ) TJ 150 °C 3
Storage Temperature (TS) TS -65 150 °C 3
Lead Temperature 260 °C soldering, 5 sec 3
Package Thermal Resistance SOIC θJA 63 °C/W SOIC (θJA) 3
Thermal Resistance Junction-to-Case, power SOIC-8 θJC 20 °C/W power SOIC-8, typical, from text 10

CAD (KiCad official)

  • Symbol: MIC5236-3.0YM
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SO-8 (KiCad packages3D, STEP)
  • 3D model files: mic5236-3-0ym-etched.step / mic5236-3-0ym-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic5236-3-0ym.step / mic5236-3-0ym.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (12 pp, sha256 dab9c0775d086119, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF