main
History Download
Ray Publish 0.1.0 c603398

MIC5205M5-5.0

HGSEMI · Linear Voltage Regulators (LDO) · SOT-23-5

MIC5205M5-5.0 from HGSEMI, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN power_in Supply input, operating range +2.5V to +16V (absolute maximum -20V to +20V); a 1µF capacitor to GND is advised if the input is more than 10 inches from the ac filter capacitor or a battery is used.
2 GND power_in Ground.
3 EN input Enable/shutdown input, CMOS compatible: logic high (>2V) enables, logic low or open shuts down; may be connected directly to IN if not needed; range 0V to VIN.
4 BYP passive Reference bypass: connect an external 470pF capacitor to GND to reduce output noise, or leave open.
5 OUT power_out Regulator output; requires an output capacitor to GND, 1.0µF minimum without CBYP or 2.2µF minimum with a 470pF CBYP.

Key specifications

Parameter Value
Manufacturer HGSEMI
Package SOT-23-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage Accuracy VO -1 1 % variation from specified VOUT, IL=100µA, TJ=25C 4
Output Voltage Accuracy (full temp) VO -3.5 3.5 % variation from specified VOUT, -40C≤TJ≤+125C 4
Line Regulation ΔVO/VO 0.004 0.012 %/V VIN = VOUT + 1V to 16V 4
Line Regulation (full temp) ΔVO/VO 0.05 %/V VIN = VOUT + 1V to 16V, -40C≤TJ≤+125C 4
Load Regulation ΔVO/VO 0.02 0.2 % IL = 0.1mA to 150mA, Note 5 4
Load Regulation (full temp) ΔVO/VO 0.5 % IL = 0.1mA to 150mA, Note 5, -40C≤TJ≤+125C 4
Dropout Voltage VIN, VO 10 50 mV IL = 100µA, Note 6 4
Dropout Voltage VIN, VO 110 150 mV IL = 50mA, Note 6 4
Dropout Voltage VIN, VO 140 230 mV IL = 100mA, Note 6 4
Dropout Voltage VIN, VO 165 275 mV IL = 150mA, Note 6 4
Quiescent Current (shutdown) IGND 0.01 1 µA VEN ≤ 0.4V (shutdown) 4
Quiescent Current (shutdown) IGND 5 µA VEN ≤ 0.18V (shutdown) 4
Ground Pin Current IGND 80 125 µA VEN ≤ 2.0V, IL = 100µA, Note 7 4
Ground Pin Current IGND 350 600 µA IL = 50mA 4
Ground Pin Current IGND 600 1000 µA IL = 100mA 4
Ground Pin Current IGND 1300 1900 µA IL = 150mA 4
Current Limit ILIMIT 320 500 mA VOUT = 0V 4
Enable Input Logic-Low Voltage VIL 0.4 V regulator shutdown 4
Enable Input Logic-Low Voltage (full temp) VIL 0.18 V regulator shutdown 4
Enable Input Logic-High Voltage VIH 2 V regulator enabled 4
Enable Input Current IIL 0.01 -1 µA VIL ≤ 0.4V 4
Enable Input Current IIL -2 µA VIL ≤ 0.18V 4
Enable Input Current IIH 5 20 µA VIH ≤ 2.0V 4
Enable Input Current IIH 25 µA VIH ≤ 2.0V 4
Output Voltage Temperature Coefficient ΔVO/ΔT 40 ppm/℃ Note 4 4
Ripple Rejection PSRR 75 dB frequency = 100Hz, IL = 100µA 4
Thermal Regulation ΔVO/ΔPD 0.05 %/W Note 8 4
Output Noise eno 260 nV/√Hz IL = 50mA, CL = 2.2µF, 470pF from BYP to GND 4
Supply Input Voltage VIN -20 20 V 3
Enable Input Voltage VEN -20 20 V 3
Lead Temperature 260 ℃ soldering, 10 sec. 3
Junction Temperature TJ -40 85 ℃ 3
Storage Temperature TS -65 150 ℃ 3
Input Voltage VIN 2.5 16 V Operating ratings 3
Enable Input Voltage VEN 0 V 0V to VIN 3
Junction Temperature TJ -40 85 C Operating ratings 3
Thermal Resistance Junction-to-Ambient θJA 220 ℃/W SOT-23-5, recommended minimum footprint 9
Thermal Resistance Junction-to-Ambient θJA 170 ℃/W SOT-23-5, 1" square copper clad 9
Thermal Resistance Junction-to-Case θJC 130 ℃/W SOT-23-5 9

CAD (KiCad official)

  • Symbol: MIC5205M5-5.0
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: mic5205m5-5-0-etched.step / mic5205m5-5-0-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic5205m5-5-0.step / mic5205m5-5-0.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HGSEMI datasheet (13 pp, sha256 1e5b578fbf54ae92, retrieved 2026-10-26, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF