3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMIC5205M5-5.0
HGSEMI · Linear Voltage Regulators (LDO) · SOT-23-5
MIC5205M5-5.0 from HGSEMI, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Supply input, operating range +2.5V to +16V (absolute maximum -20V to +20V); a 1µF capacitor to GND is advised if the input is more than 10 inches from the ac filter capacitor or a battery is used. |
| 2 | GND | power_in | Ground. |
| 3 | EN | input | Enable/shutdown input, CMOS compatible: logic high (>2V) enables, logic low or open shuts down; may be connected directly to IN if not needed; range 0V to VIN. |
| 4 | BYP | passive | Reference bypass: connect an external 470pF capacitor to GND to reduce output noise, or leave open. |
| 5 | OUT | power_out | Regulator output; requires an output capacitor to GND, 1.0µF minimum without CBYP or 2.2µF minimum with a 470pF CBYP. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy | VO | -1 | 1 | % | variation from specified VOUT, IL=100µA, TJ=25C | 4 | |
| Output Voltage Accuracy (full temp) | VO | -3.5 | 3.5 | % | variation from specified VOUT, -40C≤TJ≤+125C | 4 | |
| Line Regulation | ΔVO/VO | 0.004 | 0.012 | %/V | VIN = VOUT + 1V to 16V | 4 | |
| Line Regulation (full temp) | ΔVO/VO | 0.05 | %/V | VIN = VOUT + 1V to 16V, -40C≤TJ≤+125C | 4 | ||
| Load Regulation | ΔVO/VO | 0.02 | 0.2 | % | IL = 0.1mA to 150mA, Note 5 | 4 | |
| Load Regulation (full temp) | ΔVO/VO | 0.5 | % | IL = 0.1mA to 150mA, Note 5, -40C≤TJ≤+125C | 4 | ||
| Dropout Voltage | VIN, VO | 10 | 50 | mV | IL = 100µA, Note 6 | 4 | |
| Dropout Voltage | VIN, VO | 110 | 150 | mV | IL = 50mA, Note 6 | 4 | |
| Dropout Voltage | VIN, VO | 140 | 230 | mV | IL = 100mA, Note 6 | 4 | |
| Dropout Voltage | VIN, VO | 165 | 275 | mV | IL = 150mA, Note 6 | 4 | |
| Quiescent Current (shutdown) | IGND | 0.01 | 1 | µA | VEN ≤ 0.4V (shutdown) | 4 | |
| Quiescent Current (shutdown) | IGND | 5 | µA | VEN ≤ 0.18V (shutdown) | 4 | ||
| Ground Pin Current | IGND | 80 | 125 | µA | VEN ≤ 2.0V, IL = 100µA, Note 7 | 4 | |
| Ground Pin Current | IGND | 350 | 600 | µA | IL = 50mA | 4 | |
| Ground Pin Current | IGND | 600 | 1000 | µA | IL = 100mA | 4 | |
| Ground Pin Current | IGND | 1300 | 1900 | µA | IL = 150mA | 4 | |
| Current Limit | ILIMIT | 320 | 500 | mA | VOUT = 0V | 4 | |
| Enable Input Logic-Low Voltage | VIL | 0.4 | V | regulator shutdown | 4 | ||
| Enable Input Logic-Low Voltage (full temp) | VIL | 0.18 | V | regulator shutdown | 4 | ||
| Enable Input Logic-High Voltage | VIH | 2 | V | regulator enabled | 4 | ||
| Enable Input Current | IIL | 0.01 | -1 | µA | VIL ≤ 0.4V | 4 | |
| Enable Input Current | IIL | -2 | µA | VIL ≤ 0.18V | 4 | ||
| Enable Input Current | IIH | 5 | 20 | µA | VIH ≤ 2.0V | 4 | |
| Enable Input Current | IIH | 25 | µA | VIH ≤ 2.0V | 4 | ||
| Output Voltage Temperature Coefficient | ΔVO/ΔT | 40 | ppm/℃ | Note 4 | 4 | ||
| Ripple Rejection | PSRR | 75 | dB | frequency = 100Hz, IL = 100µA | 4 | ||
| Thermal Regulation | ΔVO/ΔPD | 0.05 | %/W | Note 8 | 4 | ||
| Output Noise | eno | 260 | nV/√Hz | IL = 50mA, CL = 2.2µF, 470pF from BYP to GND | 4 | ||
| Supply Input Voltage | VIN | -20 | 20 | V | 3 | ||
| Enable Input Voltage | VEN | -20 | 20 | V | 3 | ||
| Lead Temperature | 260 | ℃ | soldering, 10 sec. | 3 | |||
| Junction Temperature | TJ | -40 | 85 | ℃ | 3 | ||
| Storage Temperature | TS | -65 | 150 | ℃ | 3 | ||
| Input Voltage | VIN | 2.5 | 16 | V | Operating ratings | 3 | |
| Enable Input Voltage | VEN | 0 | V | 0V to VIN | 3 | ||
| Junction Temperature | TJ | -40 | 85 | C | Operating ratings | 3 | |
| Thermal Resistance Junction-to-Ambient | θJA | 220 | ℃/W | SOT-23-5, recommended minimum footprint | 9 | ||
| Thermal Resistance Junction-to-Ambient | θJA | 170 | ℃/W | SOT-23-5, 1" square copper clad | 9 | ||
| Thermal Resistance Junction-to-Case | θJC | 130 | ℃/W | SOT-23-5 | 9 |
CAD (KiCad official)
- Symbol:
MIC5205M5-5.0 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
mic5205m5-5-0-etched.step/mic5205m5-5-0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic5205m5-5-0.step/mic5205m5-5-0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (13 pp, sha256
1e5b578fbf54ae92, retrieved 2026-10-26, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).