main
Ray Publish 0.1.0 46a0953

MIC5200-3.3YS-TR

Microchip Tech · Linear Voltage Regulators (LDO) · SOT-223

MIC5200-3.3YS-TR from Microchip Tech, in a SOT-223. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN power_in Supply input; operating input voltage range is +2.5V to +26V (absolute maximum -20V to +60V).
2 GND power_in Ground pin, internally connected to the TAB.
3 OUT power_out Regulated 3.3V output delivering a guaranteed 100 mA, with a 1 µF minimum output capacitor recommended for stability.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-223
Category Power Supply Chip
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage Accuracy (25°C) VO -1 1 % Variation from specified VOUT, TJ=25°C 3
Output Voltage Accuracy (over temperature) VO -2 2 % Variation from specified VOUT, TJ=-40°C to +125°C 3
Line Regulation (25°C) ΔVO/VIN 0.004 0.1 % VIN = VOUT + 1V to 26V 3
Line Regulation (over temperature) ΔVO/VIN 0.4 % VIN = VOUT + 1V to 26V 3
Load Regulation (25°C) ΔVO/VOUT 0.04 0.16 % IL = 0.1 mA to 100 mA (Note 3) 3
Load Regulation (over temperature) ΔVO/VOUT 0.3 % IL = 0.1 mA to 100 mA (Note 3) 3
Dropout Voltage VIN, VO 230 350 mV IL = 100 mA 3
Quiescent Current IGND 0.01 10 µA VENABLE ≤ 0.7V (shutdown) 3
Ground Pin Current IGND 270 350 µA VENABLE = VDD, IL = 20 mA 3
Ground Pin Current IGND 1000 1500 µA VENABLE = VDD, IL = 100 mA 3
Ground Pin Current at Dropout IGNDDO 270 330 µA VIN = 0.5V less than specified VOUT, IL = 100 µA (Note 5) 3
Current Limit ILIMIT 100 250 mA VOUT = 0V 3
Enable Input Voltage Level, Logic Low VIL 0.7 V OFF 4
Enable Input Voltage Level, Logic High VIH 2 V ON 4
Enable Input Current Low IIL 0.01 1 µA VIL ≤ 0.7V 4
Enable Input Current High IIH 15 50 µA VIH ≥ 2.0V 4
Input Supply Voltage (absolute max) VIN -20 60 V 2
Enable Input Voltage (absolute max) VEN -20 60 V 2
Input Voltage (operating) VIN 2.5 26 V Operating ratings 2
Enable Input Voltage (operating) VEN -20 V Upper limit is VIN 2
Junction Operating Temperature Range TJ -40 125 °C Note 1 5
Lead Temperature 260 °C Soldering, 5s 5
Output Voltage Temperature Coefficient ΔVO/ΔT 40 150 ppm/°C Note 2 3
Dropout Voltage VIN, VO 17 mV IL = 100 µA 3
Dropout Voltage VIN, VO 130 mV IL = 20 mA 3
Dropout Voltage VIN, VO 150 mV IL = 30 mA 3
Dropout Voltage VIN, VO 190 mV IL = 50 mA 3
Ground Pin Current IGND 130 µA VENABLE = VDD, IL = 100 µA 3
Ground Pin Current IGND 330 µA VENABLE = VDD, IL = 30 mA 3
Ground Pin Current IGND 500 µA VENABLE = VDD, IL = 50 mA 3
Ripple Rejection PSRR 70 dB 3
Thermal Regulation ΔVO/ΔPD 0.05 %/W Note 6 3
Output Noise en 100 µV 3
Thermal Resistance, SOT-223 θJC 15 °C/W 5

CAD (KiCad official)

  • Symbol: MIC5200-3.3YS-TR
  • Footprint: Package_TO_SOT_SMD:SOT-223-3_TabPin2
  • 3D model: SOT-223 (KiCad packages3D, STEP)
  • 3D model files: mic5200-3-3ys-tr-etched.step / mic5200-3-3ys-tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic5200-3-3ys-tr.step / mic5200-3-3ys-tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (24 pp, sha256 e59a5a91f3ef30ff, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF