3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMIC5200-3.3YS-TR
Microchip Tech · Linear Voltage Regulators (LDO) · SOT-223
MIC5200-3.3YS-TR from Microchip Tech, in a SOT-223. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Supply input; operating input voltage range is +2.5V to +26V (absolute maximum -20V to +60V). |
| 2 | GND | power_in | Ground pin, internally connected to the TAB. |
| 3 | OUT | power_out | Regulated 3.3V output delivering a guaranteed 100 mA, with a 1 µF minimum output capacitor recommended for stability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-223 |
| Category | Power Supply Chip |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy (25°C) | VO | -1 | 1 | % | Variation from specified VOUT, TJ=25°C | 3 | |
| Output Voltage Accuracy (over temperature) | VO | -2 | 2 | % | Variation from specified VOUT, TJ=-40°C to +125°C | 3 | |
| Line Regulation (25°C) | ΔVO/VIN | 0.004 | 0.1 | % | VIN = VOUT + 1V to 26V | 3 | |
| Line Regulation (over temperature) | ΔVO/VIN | 0.4 | % | VIN = VOUT + 1V to 26V | 3 | ||
| Load Regulation (25°C) | ΔVO/VOUT | 0.04 | 0.16 | % | IL = 0.1 mA to 100 mA (Note 3) | 3 | |
| Load Regulation (over temperature) | ΔVO/VOUT | 0.3 | % | IL = 0.1 mA to 100 mA (Note 3) | 3 | ||
| Dropout Voltage | VIN, VO | 230 | 350 | mV | IL = 100 mA | 3 | |
| Quiescent Current | IGND | 0.01 | 10 | µA | VENABLE ≤ 0.7V (shutdown) | 3 | |
| Ground Pin Current | IGND | 270 | 350 | µA | VENABLE = VDD, IL = 20 mA | 3 | |
| Ground Pin Current | IGND | 1000 | 1500 | µA | VENABLE = VDD, IL = 100 mA | 3 | |
| Ground Pin Current at Dropout | IGNDDO | 270 | 330 | µA | VIN = 0.5V less than specified VOUT, IL = 100 µA (Note 5) | 3 | |
| Current Limit | ILIMIT | 100 | 250 | mA | VOUT = 0V | 3 | |
| Enable Input Voltage Level, Logic Low | VIL | 0.7 | V | OFF | 4 | ||
| Enable Input Voltage Level, Logic High | VIH | 2 | V | ON | 4 | ||
| Enable Input Current Low | IIL | 0.01 | 1 | µA | VIL ≤ 0.7V | 4 | |
| Enable Input Current High | IIH | 15 | 50 | µA | VIH ≥ 2.0V | 4 | |
| Input Supply Voltage (absolute max) | VIN | -20 | 60 | V | 2 | ||
| Enable Input Voltage (absolute max) | VEN | -20 | 60 | V | 2 | ||
| Input Voltage (operating) | VIN | 2.5 | 26 | V | Operating ratings | 2 | |
| Enable Input Voltage (operating) | VEN | -20 | V | Upper limit is VIN | 2 | ||
| Junction Operating Temperature Range | TJ | -40 | 125 | °C | Note 1 | 5 | |
| Lead Temperature | 260 | °C | Soldering, 5s | 5 | |||
| Output Voltage Temperature Coefficient | ΔVO/ΔT | 40 | 150 | ppm/°C | Note 2 | 3 | |
| Dropout Voltage | VIN, VO | 17 | mV | IL = 100 µA | 3 | ||
| Dropout Voltage | VIN, VO | 130 | mV | IL = 20 mA | 3 | ||
| Dropout Voltage | VIN, VO | 150 | mV | IL = 30 mA | 3 | ||
| Dropout Voltage | VIN, VO | 190 | mV | IL = 50 mA | 3 | ||
| Ground Pin Current | IGND | 130 | µA | VENABLE = VDD, IL = 100 µA | 3 | ||
| Ground Pin Current | IGND | 330 | µA | VENABLE = VDD, IL = 30 mA | 3 | ||
| Ground Pin Current | IGND | 500 | µA | VENABLE = VDD, IL = 50 mA | 3 | ||
| Ripple Rejection | PSRR | 70 | dB | 3 | |||
| Thermal Regulation | ΔVO/ΔPD | 0.05 | %/W | Note 6 | 3 | ||
| Output Noise | en | 100 | µV | 3 | |||
| Thermal Resistance, SOT-223 | θJC | 15 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
MIC5200-3.3YS-TR - Footprint:
Package_TO_SOT_SMD:SOT-223-3_TabPin2 - 3D model: SOT-223 (KiCad packages3D, STEP)
- 3D model files:
mic5200-3-3ys-tr-etched.step/mic5200-3-3ys-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic5200-3-3ys-tr.step/mic5200-3-3ys-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (24 pp, sha256
e59a5a91f3ef30ff, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).