main
Ray
Publish 0.1.0
25e28bd
MIC4801YM-TR
Microchip Tech · LED Drivers · SOIC-8
MIC4801YM-TR from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Voltage input supplying the linear LED drivers and control circuitry over 3.0V to 5.5V; connect at least a 2.2µF ceramic capacitor between VIN and GND. |
| 2 | EN | input | Enables the LED drivers and can be used as a PWM dimming input with logic low at 0.2V max and logic high at 1.2V min; it must not be left floating. |
| 3 | RSET | passive | An internal 1.27V reference sets the nominal maximum WLED current through a resistor to GND, e.g. 12.1kΩ gives 416mA at 100% duty cycle. |
| 4 | GND | power_in | Ground return for the linear LED driver and the input capacitor, which should be routed with low impedance traces to this pin. |
| 5 | D1 | input | LED1 driver input where the LED cathode connects with the anode tied to VIN; all D1 pins must be connected to the LED. |
| 6 | D1 | input | LED1 driver input where the LED cathode connects with the anode tied to VIN; all D1 pins must be connected to the LED. |
| 7 | D1 | input | LED1 driver input where the LED cathode connects with the anode tied to VIN; all D1 pins must be connected to the LED. |
| 8 | D1 | input | LED1 driver input where the LED cathode connects with the anode tied to VIN; all D1 pins must be connected to the LED. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Current Accuracy | 374 | 416 | 458 | mA | VIN=VEN=5V; RSET=12.1kΩ; VD1=1.2V; TJ=25°C unless noted. Note 3: average current based on RSET resistance | 3 | |
| Drop-out | 130 | 250 | mV | VIN=VEN=5V; RSET=12.1kΩ; TJ=25°C unless noted. Where ILED = 90% of LED current seen at VDROPNOM = 1.2V, 100% brightness level | 3 | ||
| Ground/Supply Bias Current | 2.2 | 2.9 | mA | VIN=VEN=5V; RSET=12.1kΩ; TJ=25°C unless noted. IOUT = 416mA | 3 | ||
| Shutdown Current | 0.01 | 1 | µA | VIN=5V; RSET=12.1kΩ; TJ=25°C unless noted. VEN = 0V | 3 | ||
| Enable Input Current | 0.01 | 1 | µA | VIN=5V; RSET=12.1kΩ; TJ=25°C unless noted. VIH > 1.2V | 3 | ||
| Stand-by to Shutdown Time | 10 | 20 | 40 | ms | VIN=5V; RSET=12.1kΩ; TJ=25°C unless noted. VEN = 0V | 3 | |
| Main Input Voltage (VIN) | VIN | -0.3 | 6 | V | 3 | ||
| Enable Input Voltage (VEN) | VEN | -0.3 | 6 | V | 3 | ||
| LED Driver Voltage (VD1) | VD1 | -0.3 | 6 | V | 3 | ||
| Storage Temperature (Ts) | Ts | -65 | 150 | °C | 3 | ||
| Lead Temperature (soldering) | 260 | °C | soldering, 10 sec. | 3 | |||
| Supply Voltage (VIN) | VIN | 3 | 5.5 | V | 3 | ||
| Enable Input Voltage (VEN) | VEN | 0 | V | Maximum is VIN | 3 | ||
| LED Driver Voltage (VD1) | VD1 | 0 | V | Maximum is VIN | 3 | ||
| Junction Temperature (TJ) | TJ | -40 | 125 | °C | 3 |
CAD (KiCad official)
- Symbol:
MIC4801YM-TR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
mic4801ym-tr-etched.step/mic4801ym-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic4801ym-tr.step/mic4801ym-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (12 pp, sha256
5f4a00e2c6933815, retrieved 2026-11-05, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MIC4801YM-TR
**Microchip Tech** · LED Drivers · SOIC-8
MIC4801YM-TR from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Voltage input supplying the linear LED drivers and control circuitry over 3.0V to 5.5V; connect at least a 2.2µF ceramic capacitor between VIN and GND. |
| 2 | EN | input | Enables the LED drivers and can be used as a PWM dimming input with logic low at 0.2V max and logic high at 1.2V min; it must not be left floating. |
| 3 | RSET | passive | An internal 1.27V reference sets the nominal maximum WLED current through a resistor to GND, e.g. 12.1kΩ gives 416mA at 100% duty cycle. |
| 4 | GND | power_in | Ground return for the linear LED driver and the input capacitor, which should be routed with low impedance traces to this pin. |
| 5 | D1 | input | LED1 driver input where the LED cathode connects with the anode tied to VIN; all D1 pins must be connected to the LED. |
| 6 | D1 | input | LED1 driver input where the LED cathode connects with the anode tied to VIN; all D1 pins must be connected to the LED. |
| 7 | D1 | input | LED1 driver input where the LED cathode connects with the anode tied to VIN; all D1 pins must be connected to the LED. |
| 8 | D1 | input | LED1 driver input where the LED cathode connects with the anode tied to VIN; all D1 pins must be connected to the LED. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Current Accuracy | | 374 | 416 | 458 | mA | VIN=VEN=5V; RSET=12.1kΩ; VD1=1.2V; TJ=25°C unless noted. Note 3: average current based on RSET resistance | 3 |
| Drop-out | | | 130 | 250 | mV | VIN=VEN=5V; RSET=12.1kΩ; TJ=25°C unless noted. Where ILED = 90% of LED current seen at VDROPNOM = 1.2V, 100% brightness level | 3 |
| Ground/Supply Bias Current | | | 2.2 | 2.9 | mA | VIN=VEN=5V; RSET=12.1kΩ; TJ=25°C unless noted. IOUT = 416mA | 3 |
| Shutdown Current | | | 0.01 | 1 | µA | VIN=5V; RSET=12.1kΩ; TJ=25°C unless noted. VEN = 0V | 3 |
| Enable Input Current | | | 0.01 | 1 | µA | VIN=5V; RSET=12.1kΩ; TJ=25°C unless noted. VIH > 1.2V | 3 |
| Stand-by to Shutdown Time | | 10 | 20 | 40 | ms | VIN=5V; RSET=12.1kΩ; TJ=25°C unless noted. VEN = 0V | 3 |
| Main Input Voltage (VIN) | VIN | -0.3 | | 6 | V | | 3 |
| Enable Input Voltage (VEN) | VEN | -0.3 | | 6 | V | | 3 |
| LED Driver Voltage (VD1) | VD1 | -0.3 | | 6 | V | | 3 |
| Storage Temperature (Ts) | Ts | -65 | | 150 | °C | | 3 |
| Lead Temperature (soldering) | | | | 260 | °C | soldering, 10 sec. | 3 |
| Supply Voltage (VIN) | VIN | 3 | | 5.5 | V | | 3 |
| Enable Input Voltage (VEN) | VEN | 0 | | | V | Maximum is VIN | 3 |
| LED Driver Voltage (VD1) | VD1 | 0 | | | V | Maximum is VIN | 3 |
| Junction Temperature (TJ) | TJ | -40 | | 125 | °C | | 3 |
## CAD (KiCad official)
- Symbol: `MIC4801YM-TR`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `mic4801ym-tr-etched.step` / `mic4801ym-tr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mic4801ym-tr.step` / `mic4801ym-tr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/mic4801ym-tr-datasheet.pdf) (12 pp, sha256 `5f4a00e2c6933815`, retrieved 2026-11-05, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mic4801ym-tr-datasheet.pdf)