Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MIC4801YM-TR

Microchip Tech · LED Drivers · SOIC-8

MIC4801YM-TR from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Voltage input supplying the linear LED drivers and control circuitry over 3.0V to 5.5V; connect at least a 2.2µF ceramic capacitor between VIN and GND.
2 EN input Enables the LED drivers and can be used as a PWM dimming input with logic low at 0.2V max and logic high at 1.2V min; it must not be left floating.
3 RSET passive An internal 1.27V reference sets the nominal maximum WLED current through a resistor to GND, e.g. 12.1kΩ gives 416mA at 100% duty cycle.
4 GND power_in Ground return for the linear LED driver and the input capacitor, which should be routed with low impedance traces to this pin.
5 D1 input LED1 driver input where the LED cathode connects with the anode tied to VIN; all D1 pins must be connected to the LED.
6 D1 input LED1 driver input where the LED cathode connects with the anode tied to VIN; all D1 pins must be connected to the LED.
7 D1 input LED1 driver input where the LED cathode connects with the anode tied to VIN; all D1 pins must be connected to the LED.
8 D1 input LED1 driver input where the LED cathode connects with the anode tied to VIN; all D1 pins must be connected to the LED.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-8
Category Nixie Tube Driver/LED Driver
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Current Accuracy 374 416 458 mA VIN=VEN=5V; RSET=12.1kΩ; VD1=1.2V; TJ=25°C unless noted. Note 3: average current based on RSET resistance 3
Drop-out 130 250 mV VIN=VEN=5V; RSET=12.1kΩ; TJ=25°C unless noted. Where ILED = 90% of LED current seen at VDROPNOM = 1.2V, 100% brightness level 3
Ground/Supply Bias Current 2.2 2.9 mA VIN=VEN=5V; RSET=12.1kΩ; TJ=25°C unless noted. IOUT = 416mA 3
Shutdown Current 0.01 1 µA VIN=5V; RSET=12.1kΩ; TJ=25°C unless noted. VEN = 0V 3
Enable Input Current 0.01 1 µA VIN=5V; RSET=12.1kΩ; TJ=25°C unless noted. VIH > 1.2V 3
Stand-by to Shutdown Time 10 20 40 ms VIN=5V; RSET=12.1kΩ; TJ=25°C unless noted. VEN = 0V 3
Main Input Voltage (VIN) VIN -0.3 6 V 3
Enable Input Voltage (VEN) VEN -0.3 6 V 3
LED Driver Voltage (VD1) VD1 -0.3 6 V 3
Storage Temperature (Ts) Ts -65 150 °C 3
Lead Temperature (soldering) 260 °C soldering, 10 sec. 3
Supply Voltage (VIN) VIN 3 5.5 V 3
Enable Input Voltage (VEN) VEN 0 V Maximum is VIN 3
LED Driver Voltage (VD1) VD1 0 V Maximum is VIN 3
Junction Temperature (TJ) TJ -40 125 °C 3

CAD (KiCad official)

  • Symbol: MIC4801YM-TR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: mic4801ym-tr-etched.step / mic4801ym-tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic4801ym-tr.step / mic4801ym-tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (12 pp, sha256 5f4a00e2c6933815, retrieved 2026-11-05, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF