main
Ray
Publish 0.1.0
115fd62
MIC47100-12YMME
Microchip Tech · Power Management Specialized - PMIC · MSOP-8
MIC47100-12YMME from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input supply and drain of the NMOS pass transistor, which is the power input for the regulator and steps the input voltage down to the output voltage, with an input supply range of 1.0V to 3.6V. |
| 2 | IN | power_in | Input supply and drain of the NMOS pass transistor, which is the power input for the regulator and steps the input voltage down to the output voltage, with an input supply range of 1.0V to 3.6V. |
| 3 | GND | power_in | Ground; ground pins and the exposed pad must be connected externally. |
| 4 | BIAS | power_in | Bias supply that powers the internal regulator circuitry, with a bias supply range of 2.3V to 5.5V. |
| 5 | EN | input | TTL/CMOS compatible enable input; logic high enables the regulator, while logic low or open shuts it down. |
| 6 | FB | input | Feedback input for the fixed-voltage version, which must be connected to OUT; optimum load regulation is obtained when feedback is taken from the actual load point. |
| 7 | OUT | power_out | Regulated output voltage of the regulator, delivering up to 1A. |
| 8 | OUT | power_out | Regulated output voltage of the regulator, delivering up to 1A. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MSOP-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Supply Voltage (VIN) absolute maximum | VIN | 0 | 4 | V | 4 | ||
| Bias Supply Voltage (VBIAS) absolute maximum | VBIAS | 0 | 6 | V | 4 | ||
| Enable Voltage (VEN) absolute maximum | VEN | 0 | 6 | V | 4 | ||
| Storage Temperature (Ts) | TSTORE | -65 | 150 | °C | 4 | ||
| Lead Temperature (soldering) | 260 | °C | soldering, # sec | 4 | |||
| ESD Rating | 2 | kV | 4 | ||||
| Input Supply Voltage (VIN) operating range | VIN | 1 | 3.6 | V | 4 | ||
| Bias Supply Voltage (VBIAS) operating range | VBIAS | 2.3 | 5.5 | V | 4 | ||
| Enable Input Voltage (VEN) operating range | VEN | 0 | V | up to VBIAS | 4 | ||
| Junction Temperature (TJ) operating range | TJ | -40 | 125 | °C | 4 | ||
| UVLO Threshold Bias Supply | VBIAS | 1.9 | 2.1 | 2.3 | V | 4 | |
| UVLO Threshold Input Supply | VIN | 0.7 | 0.85 | 1 | V | 4 | |
| Output Voltage Variation from nominal VOUT | VOUT | -1.5 | 1.5 | % | 4 | ||
| Output Voltage Accuracy variation over temperature | VOUT | -2 | 2 | % | -40°C to +125°C | 4 | |
| Output Voltage Line Regulation (Bias Supply) | VOUT | -0.1 | 0.015 | 0.1 | %/V | VBIAS = VOUT + 2.1V to 5.5V | 4 |
| Output Voltage Line Regulation (Input Supply) | VOUT | -0.05 | 0.005 | 0.05 | %/V | VIN = VOUT + 0.5V to 3.6V | 4 |
| Load Regulation | 0.2 | 0.5 | % | IOUT = 10mA to 1A | 4 | ||
| Input Supply Dropout Voltage | 8.5 | 50 | mV | IOUT = 100mA | 4 | ||
| Input Supply Dropout Voltage | 37 | 250 | mV | IOUT = 500mA | 4 | ||
| Input Supply Dropout Voltage | 80 | mV | IOUT = 1A | 4 | |||
| Bias Supply Dropout Voltage | 1.15 | V | IOUT = 100mA | 4 | |||
| Bias Supply Dropout Voltage | 1.25 | V | IOUT = 500mA | 4 | |||
| Bias Supply Dropout Voltage | 1.35 | V | IOUT = 1A | 4 | |||
| Ground current from VBIAS | IGND | 350 | 500 | µA | IOUT = 1mA | 4 | |
| Shutdown current from VBIAS | 0.1 | 1 | µA | EN < 0.2V | 4 | ||
| Ground current from VIN | 6 | µA | IOUT = 1A | 4 | |||
| Shutdown current from VIN | 0.1 | 1 | µA | EN < 0.2V | 4 | ||
| Ripple Rejection | PSRR | 80 | dB | f = 1kHz; COUT = 1.0µF; IOUT = 100mA | 4 | ||
| Ripple Rejection | PSRR | 55 | dB | f = 100kHz; COUT = 1.0µF; IOUT = 100mA | 4 | ||
| Ripple Rejection | PSRR | 45 | dB | f = 500kHz; COUT = 1.0µF; IOUT = 100mA | 4 | ||
| UVLO Hysteresis VBIAS | 70 | mV | VBIAS | 4 | |||
| UVLO Hysteresis VIN | 25 | mV | VIN | 4 | |||
| Current Limit | 1.1 | 1.6 | 2.5 | A | VIN = 2.7V; VOUT = 0V | 5 | |
| Output Voltage Noise | 63 | µVRMS | COUT=1μF; 10Hz to 100kHz; IOUT = 100mA | 5 | |||
| Over-temperature Shutdown | 160 | °C | 5 | ||||
| Over-temperature Shutdown Hysteresis | 20 | °C | 5 | ||||
| Enable Voltage Logic Low | VIL | 0.2 | V | 5 | |||
| Enable Voltage Logic High | VIH | 1 | V | 5 | |||
| Enable Input Current | 1 | µA | VIL < 0.2V | 5 | |||
| Enable Input Current | 6 | µA | VIH = 1.2V | 5 | |||
| Turn-on Time | 35 | 500 | µs | COUT = 1µF; 90% of typical VOUT | 5 |
CAD (KiCad official)
- Symbol:
MIC47100-12YMME - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
mic47100-12ymme-etched.step/mic47100-12ymme-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic47100-12ymme.step/mic47100-12ymme.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet, copy hosted by LCSC (13 pp, sha256
00a8ca25164c3b12, retrieved 2026-11-21) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MIC47100-12YMME
**Microchip Tech** · Power Management Specialized - PMIC · MSOP-8
MIC47100-12YMME from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input supply and drain of the NMOS pass transistor, which is the power input for the regulator and steps the input voltage down to the output voltage, with an input supply range of 1.0V to 3.6V. |
| 2 | IN | power_in | Input supply and drain of the NMOS pass transistor, which is the power input for the regulator and steps the input voltage down to the output voltage, with an input supply range of 1.0V to 3.6V. |
| 3 | GND | power_in | Ground; ground pins and the exposed pad must be connected externally. |
| 4 | BIAS | power_in | Bias supply that powers the internal regulator circuitry, with a bias supply range of 2.3V to 5.5V. |
| 5 | EN | input | TTL/CMOS compatible enable input; logic high enables the regulator, while logic low or open shuts it down. |
| 6 | FB | input | Feedback input for the fixed-voltage version, which must be connected to OUT; optimum load regulation is obtained when feedback is taken from the actual load point. |
| 7 | OUT | power_out | Regulated output voltage of the regulator, delivering up to 1A. |
| 8 | OUT | power_out | Regulated output voltage of the regulator, delivering up to 1A. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MSOP-8 |
| Category | Power Supply Chip |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Supply Voltage (VIN) absolute maximum | VIN | 0 | | 4 | V | | 4 |
| Bias Supply Voltage (VBIAS) absolute maximum | VBIAS | 0 | | 6 | V | | 4 |
| Enable Voltage (VEN) absolute maximum | VEN | 0 | | 6 | V | | 4 |
| Storage Temperature (Ts) | TSTORE | -65 | | 150 | °C | | 4 |
| Lead Temperature (soldering) | | | | 260 | °C | soldering, # sec | 4 |
| ESD Rating | | | | 2 | kV | | 4 |
| Input Supply Voltage (VIN) operating range | VIN | 1 | | 3.6 | V | | 4 |
| Bias Supply Voltage (VBIAS) operating range | VBIAS | 2.3 | | 5.5 | V | | 4 |
| Enable Input Voltage (VEN) operating range | VEN | 0 | | | V | up to VBIAS | 4 |
| Junction Temperature (TJ) operating range | TJ | -40 | | 125 | °C | | 4 |
| UVLO Threshold Bias Supply | VBIAS | 1.9 | 2.1 | 2.3 | V | | 4 |
| UVLO Threshold Input Supply | VIN | 0.7 | 0.85 | 1 | V | | 4 |
| Output Voltage Variation from nominal VOUT | VOUT | -1.5 | | 1.5 | % | | 4 |
| Output Voltage Accuracy variation over temperature | VOUT | -2 | | 2 | % | -40°C to +125°C | 4 |
| Output Voltage Line Regulation (Bias Supply) | VOUT | -0.1 | 0.015 | 0.1 | %/V | VBIAS = VOUT + 2.1V to 5.5V | 4 |
| Output Voltage Line Regulation (Input Supply) | VOUT | -0.05 | 0.005 | 0.05 | %/V | VIN = VOUT + 0.5V to 3.6V | 4 |
| Load Regulation | | | 0.2 | 0.5 | % | IOUT = 10mA to 1A | 4 |
| Input Supply Dropout Voltage | | | 8.5 | 50 | mV | IOUT = 100mA | 4 |
| Input Supply Dropout Voltage | | | 37 | 250 | mV | IOUT = 500mA | 4 |
| Input Supply Dropout Voltage | | | 80 | | mV | IOUT = 1A | 4 |
| Bias Supply Dropout Voltage | | | 1.15 | | V | IOUT = 100mA | 4 |
| Bias Supply Dropout Voltage | | | 1.25 | | V | IOUT = 500mA | 4 |
| Bias Supply Dropout Voltage | | | 1.35 | | V | IOUT = 1A | 4 |
| Ground current from VBIAS | IGND | | 350 | 500 | µA | IOUT = 1mA | 4 |
| Shutdown current from VBIAS | | | 0.1 | 1 | µA | EN < 0.2V | 4 |
| Ground current from VIN | | | 6 | | µA | IOUT = 1A | 4 |
| Shutdown current from VIN | | | 0.1 | 1 | µA | EN < 0.2V | 4 |
| Ripple Rejection | PSRR | | 80 | | dB | f = 1kHz; COUT = 1.0µF; IOUT = 100mA | 4 |
| Ripple Rejection | PSRR | | 55 | | dB | f = 100kHz; COUT = 1.0µF; IOUT = 100mA | 4 |
| Ripple Rejection | PSRR | | 45 | | dB | f = 500kHz; COUT = 1.0µF; IOUT = 100mA | 4 |
| UVLO Hysteresis VBIAS | | | 70 | | mV | VBIAS | 4 |
| UVLO Hysteresis VIN | | | 25 | | mV | VIN | 4 |
| Current Limit | | 1.1 | 1.6 | 2.5 | A | VIN = 2.7V; VOUT = 0V | 5 |
| Output Voltage Noise | | | 63 | | µVRMS | COUT=1μF; 10Hz to 100kHz; IOUT = 100mA | 5 |
| Over-temperature Shutdown | | | 160 | | °C | | 5 |
| Over-temperature Shutdown Hysteresis | | | 20 | | °C | | 5 |
| Enable Voltage Logic Low | VIL | | | 0.2 | V | | 5 |
| Enable Voltage Logic High | VIH | 1 | | | V | | 5 |
| Enable Input Current | | | 1 | | µA | VIL < 0.2V | 5 |
| Enable Input Current | | | 6 | | µA | VIH = 1.2V | 5 |
| Turn-on Time | | | 35 | 500 | µs | COUT = 1µF; 90% of typical VOUT | 5 |
## CAD (KiCad official)
- Symbol: `MIC47100-12YMME`
- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`
- 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files: `mic47100-12ymme-etched.step` / `mic47100-12ymme-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mic47100-12ymme.step` / `mic47100-12ymme.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet, copy hosted by LCSC](docs/mic47100-12ymme-datasheet.pdf) (13 pp, sha256 `00a8ca25164c3b12`, retrieved 2026-11-21)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mic47100-12ymme-datasheet.pdf)