Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MIC47100-12YMME

Microchip Tech · Power Management Specialized - PMIC · MSOP-8

MIC47100-12YMME from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN power_in Input supply and drain of the NMOS pass transistor, which is the power input for the regulator and steps the input voltage down to the output voltage, with an input supply range of 1.0V to 3.6V.
2 IN power_in Input supply and drain of the NMOS pass transistor, which is the power input for the regulator and steps the input voltage down to the output voltage, with an input supply range of 1.0V to 3.6V.
3 GND power_in Ground; ground pins and the exposed pad must be connected externally.
4 BIAS power_in Bias supply that powers the internal regulator circuitry, with a bias supply range of 2.3V to 5.5V.
5 EN input TTL/CMOS compatible enable input; logic high enables the regulator, while logic low or open shuts it down.
6 FB input Feedback input for the fixed-voltage version, which must be connected to OUT; optimum load regulation is obtained when feedback is taken from the actual load point.
7 OUT power_out Regulated output voltage of the regulator, delivering up to 1A.
8 OUT power_out Regulated output voltage of the regulator, delivering up to 1A.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package MSOP-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Supply Voltage (VIN) absolute maximum VIN 0 4 V 4
Bias Supply Voltage (VBIAS) absolute maximum VBIAS 0 6 V 4
Enable Voltage (VEN) absolute maximum VEN 0 6 V 4
Storage Temperature (Ts) TSTORE -65 150 °C 4
Lead Temperature (soldering) 260 °C soldering, # sec 4
ESD Rating 2 kV 4
Input Supply Voltage (VIN) operating range VIN 1 3.6 V 4
Bias Supply Voltage (VBIAS) operating range VBIAS 2.3 5.5 V 4
Enable Input Voltage (VEN) operating range VEN 0 V up to VBIAS 4
Junction Temperature (TJ) operating range TJ -40 125 °C 4
UVLO Threshold Bias Supply VBIAS 1.9 2.1 2.3 V 4
UVLO Threshold Input Supply VIN 0.7 0.85 1 V 4
Output Voltage Variation from nominal VOUT VOUT -1.5 1.5 % 4
Output Voltage Accuracy variation over temperature VOUT -2 2 % -40°C to +125°C 4
Output Voltage Line Regulation (Bias Supply) VOUT -0.1 0.015 0.1 %/V VBIAS = VOUT + 2.1V to 5.5V 4
Output Voltage Line Regulation (Input Supply) VOUT -0.05 0.005 0.05 %/V VIN = VOUT + 0.5V to 3.6V 4
Load Regulation 0.2 0.5 % IOUT = 10mA to 1A 4
Input Supply Dropout Voltage 8.5 50 mV IOUT = 100mA 4
Input Supply Dropout Voltage 37 250 mV IOUT = 500mA 4
Input Supply Dropout Voltage 80 mV IOUT = 1A 4
Bias Supply Dropout Voltage 1.15 V IOUT = 100mA 4
Bias Supply Dropout Voltage 1.25 V IOUT = 500mA 4
Bias Supply Dropout Voltage 1.35 V IOUT = 1A 4
Ground current from VBIAS IGND 350 500 µA IOUT = 1mA 4
Shutdown current from VBIAS 0.1 1 µA EN < 0.2V 4
Ground current from VIN 6 µA IOUT = 1A 4
Shutdown current from VIN 0.1 1 µA EN < 0.2V 4
Ripple Rejection PSRR 80 dB f = 1kHz; COUT = 1.0µF; IOUT = 100mA 4
Ripple Rejection PSRR 55 dB f = 100kHz; COUT = 1.0µF; IOUT = 100mA 4
Ripple Rejection PSRR 45 dB f = 500kHz; COUT = 1.0µF; IOUT = 100mA 4
UVLO Hysteresis VBIAS 70 mV VBIAS 4
UVLO Hysteresis VIN 25 mV VIN 4
Current Limit 1.1 1.6 2.5 A VIN = 2.7V; VOUT = 0V 5
Output Voltage Noise 63 µVRMS COUT=1μF; 10Hz to 100kHz; IOUT = 100mA 5
Over-temperature Shutdown 160 °C 5
Over-temperature Shutdown Hysteresis 20 °C 5
Enable Voltage Logic Low VIL 0.2 V 5
Enable Voltage Logic High VIH 1 V 5
Enable Input Current 1 µA VIL < 0.2V 5
Enable Input Current 6 µA VIH = 1.2V 5
Turn-on Time 35 500 µs COUT = 1µF; 90% of typical VOUT 5

CAD (KiCad official)

  • Symbol: MIC47100-12YMME
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: mic47100-12ymme-etched.step / mic47100-12ymme-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic47100-12ymme.step / mic47100-12ymme.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet, copy hosted by LCSC (13 pp, sha256 00a8ca25164c3b12, retrieved 2026-11-21)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF