Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
MIC47050-1.8YML-TR
Microchip Tech · Linear Voltage Regulators (LDO) · DFN-6-EP(2x2)
MIC47050-1.8YML-TR from Microchip Tech, in a DFN-6-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BIAS | power_in | Bias supply is the power input for the internal control circuitry of the regulator and should be bypassed with 0.1 µF ceramic capacitors to ground. |
| 2 | GND | power_in | Ground pin, which must be connected externally together with the exposed pad. |
| 3 | IN | power_in | Input supply and drain of the NMOS pass transistor, with a minimum input voltage of 1.0 V. |
| 4 | OUT | power_out | Regulated output voltage of the regulator, which requires a 1 µF or greater ceramic output capacitor for stability. |
| 5 | PGOOD | output | Open-drain power good output that is driven low when the output is below the power good threshold and goes high impedance when the output is above it. |
| 6 | EN | input | TTL/CMOS compatible enable input where logic-high enables the regulator and logic-low shuts it down, and it must not be left floating. |
| 7 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | DFN-6-EP(2x2) |
| Category | Power Supply Chip |
| Pins | 7 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage Range | VIN | 1 | 3.6 | V | 4 | ||
| VIN UVLO Threshold | VIN_UVLO | 0.7 | 0.85 | 1 | V | VIN Rising | 4 |
| Ground Current in Shutdown | IGND | 0.1 | 1 | µA | VEN ≤ 0.2V (Regulator Shutdown) | 4 | |
| IN Bias Current | IIN | 6 | 15 | µA | IOUT = 500 mA; VIN = VOUT + 0.5V | 4 | |
| BIAS Input Voltage | VBIAS | 2.3 | 5.5 | V | 4 | ||
| VBIAS UVLO Threshold | BIAS_UVLO | 1.7 | 2.1 | 2.3 | V | VBIAS Rising | 4 |
| Dropout Voltage | VBIAS - VOUT | 1.25 | 2.1 | V | IOUT = 500 mA | 5 | |
| VBIAS Supply Current | IBIAS | 330 | 500 | µA | IOUT = 1 mA; VBIAS = VOUT + 2.1V | 5 | |
| VBIAS Supply Current in Shutdown | IBIAS_SHDN | 0.1 | 1 | µA | VEN ≤ 0.2V (Regulator Shutdown) | 5 | |
| Dropout Voltage | VIN - VOUT | 9 | 50 | mV | IOUT = 100 mA | 5 | |
| Dropout Voltage | VIN - VOUT | 44 | 120 | mV | IOUT = 500 mA | 5 | |
| Output Voltage Accuracy | VOUT | -1.5 | 1.5 | % | IOUT = 100 µA, variation from nominal VOUT | 5 | |
| Output Voltage Accuracy | VOUT | -2 | 2 | % | variation from nominal VOUT | 5 | |
| VBIAS Line Regulation | ΔVOUT/(VOUT x ΔVBIAS) | -0.1 | 0.015 | 0.1 | %/V | VBIAS = VOUT + 2.1V to 5.5V | 5 |
| VIN Line Regulation | ΔVOUT/(VOUT x ΔVIN) | -0.05 | 0.005 | 0.05 | %/V | VIN = VOUT + 0.5V to 3.6V | 5 |
| Load Regulation | ΔVOUT/VOUT | 0.2 | 0.5 | % | IOUT = 10 mA to 500 mA | 5 | |
| Short-Circuit Current Limit | ISC | 0.6 | 1.6 | 3 | A | VIN = 2.7V; VOUT = 0V | 5 |
| EN Logic Level High | VEN_HIGH | 1 | 0.77 | V | 5 | ||
| EN Logic Level Low | VEN_LOW | 0.67 | 0.2 | V | 5 | ||
| Enable Bias Current | IEN_SHDN | 1 | 2 | µA | VEN ≤ 0.2V (Regulator Shutdown) | 5 | |
| Enable Bias Current | IEN | 6 | 10 | µA | VEN = 1.0V (Regulator Enabled) | 5 | |
| Turn-On Time | tON | 15 | 500 | µs | COUT = 1 µF; 90% of typical VOUT | 5 | |
| Power Good Threshold Voltage | VPWRGD_TH_R | 91 | 95 | % | VOUT Rising | 5 | |
| Power Good Threshold Voltage | VPWRGD_TH_F | 85 | 89 | % | VOUT Falling | 5 | |
| Power Good Output Low Voltage | VPWRGD_L | 0.02 | 0.1 | V | IPG = 250 µA | 5 | |
| Power Good Leakage Current | IPWRGD_L | -1 | 0.01 | 1 | µA | VPG = 5.0V | 5 |
| Storage Temperature Range | TS | -65 | 150 | °C | 6 | ||
| Junction Temperature Range | TJ | -40 | 125 | °C | 6 | ||
| Lead Temperature | 260 | °C | Soldering, 10 sec. | 6 | |||
| IN Supply Voltage (absolute maximum) | VIN | -0.3 | 4 | V | 4 | ||
| Bias Supply Voltage (absolute maximum) | VBIAS | -0.3 | 6 | V | 4 | ||
| Enable Voltage (absolute maximum) | VEN | -0.3 | 6 | V | 4 | ||
| Power Good Voltage (absolute maximum) | VPGOOD | -0.3 | 6 | V | 4 | ||
| ADJ Pin Voltage (absolute maximum) | VADJ | -0.3 | 6 | V | 4 | ||
| OUT Pin Voltage (absolute maximum) | VOUT | -0.3 | V | maximum is VIN | 4 | ||
| ESD Rating | 2 | kV | Note 2: Human body model, 1.5 kΩ in series with 100 pF | 4 | |||
| IN Supply Voltage (operating) | VIN | 1 | 3.6 | V | VIN < VBIAS | 4 | |
| Bias Voltage (operating) | VBIAS | 2.3 | 5.5 | V | 4 | ||
| Enable Input Voltage (operating) | VEN | 0 | V | up to VBIAS | 4 | ||
| Power Good Voltage (operating) | VPGOOD | 0 | V | up to VBIAS | 4 | ||
| Output Voltage Range | 0.4 | 2 | V | 4 | |||
| Thermal Resistance DFN-6 junction-to-ambient | JA | 90 | °C/W | 6 | |||
| Thermal Resistance DFN-6 junction-to-case | JC | 45 | °C/W | 6 |
CAD (KiCad official)
- Symbol:
MIC47050-1.8YML-TR - Footprint:
Package_DFN_QFN:DFN-6-1EP_2x2mm_P0.65mm_EP1x1.6mm - 3D model: DFN-6-EP(2x2) (KiCad packages3D, STEP)
- 3D model files:
mic47050-1-8yml-tr-etched.step/mic47050-1-8yml-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic47050-1-8yml-tr.step/mic47050-1-8yml-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (24 pp, sha256
6a684ddf3f35ca2d, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).