main
History Download
Ray Publish 0.1.0 02bb70b

MIC4682YM

Microchip Tech · DC-DC Converters · SOIC-8

MIC4682YM from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 FB input Feedback input that senses the output voltage; connect to the 1.23V tap of the output voltage-divider network.
2 GND power_in Ground return, tied internally to pins 6 and 7 and the die-attach paddle, which also acts as the heat-sinking path to the PCB ground plane.
3 ISET input Current limit set input; connect an external resistor to ground to set the current limit (400mA to 2A), and do not ground or float this pin.
4 SHDN input Shutdown input; logic low (<0.8V) enables the regulator and logic high (>2V) shuts it down.
5 IN power_in Unregulated supply voltage input, +4V to +34V.
6 GND power_in Ground return, tied internally to pins 2 and 7 and the die-attach paddle, which also acts as the heat-sinking path to the PCB ground plane.
7 GND power_in Ground return, tied internally to pins 2 and 6 and the die-attach paddle, which also acts as the heat-sinking path to the PCB ground plane.
8 SW output Switch output, the internal power emitter of the NPN output switch.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage Range VIN 4 34 V Note 4 3
Quiescent Current IIN 7 12 mA VFB = 1.5V 3
Quiescent Current (regulator off) IIN 35 100 µA VSHDN = 5V (Regulator off) 3
Standby Quiescent Current IIN 1 µA VSHDN = VIN 3
Feedback Voltage (±1%) VFB 1.217 1.23 1.243 V (±1%) 3
Feedback Voltage (±2%, over temp) VFB 1.205 1.255 V (±2%) 3
Feedback Voltage VFB 1.193 1.23 1.267 V 8V ≤ VIN ≤ 34V, 0.1A ≤ ILOAD ≤ 0.8A 3
Feedback Voltage (over temp) VFB 1.18 1.28 V 8V ≤ VIN ≤ 34V, 0.1A ≤ ILOAD ≤ 0.8A 3
Current Limit Accuracy ILIM 0.9 1 1.1 A See Test Circuit, VOUT = 3.6V 3
Oscillator Frequency fSW 180 200 220 kHz 3
Maximum Duty Cycle DMAX 93 95 % VFB = 1.0V 3
Switch Saturation Voltage VSW 1.4 1.8 V IOUT = 1A 3
Switch Leakage Current ISW 2 100 µA VIN = 34V, VSHDN = 5V, VSW = 0V 3
Switch Leakage Current ISW 2 10 mA VIN = 34V, VSHDN = 5V, VSW = -1V 3
Shutdown Input Logic Level, Regulator Off VSHDN 1.4 2 V Regulator Off 3
Shutdown Input Logic Level, Regulator On VSHDN 1.25 0.8 V Regulator On 3
Shutdown Input Current ISHDN -10 -0.5 1 µA VSHDN = 5V (Regulator Off) 3
Thermal Shutdown TJ 160 °C 3
Supply Voltage (absolute max) VIN 38 V Note 3, transients only 3
Shutdown Voltage VSHDN -0.3 38 V 3
Steady-State Output Switch Voltage VSW -1 V 3
Feedback Voltage (absolute max) VFB 12 V 3
Current Limit Set Voltage VISET 1.23 7 V 3
Ambient Storage Temperature Ts -65 150 °C 3
ESD Rating 2 kV Human body model, 1.5kΩ in series with 100pF 3
Supply Voltage (operating) VIN 4 34 V Notes 4, 7 3
Junction Temperature Range TJ -40 125 °C 3

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper 6. Measured on 1.5” square of 1oz. copper FR4 printed circuit board connected to the device ground leads. 3

CAD (KiCad official)

  • Symbol: MIC4682YM
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: mic4682ym-etched.step / mic4682ym-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic4682ym.step / mic4682ym.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (15 pp, sha256 bb9934959c04a60e, retrieved 2026-10-31, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF